dt-bindings: arm: fsl: Add binding for Gateworks boards with IMX8MM
Subsystems (2)
PATCH v4 1/2 dt-bindings: arm: fsl: Add binding for Gateworks boards with IMX8MM
Add bindings for the Gateworks Venice Development kit boards with IMX8MM System on Module.
---
v4: no changes
v3: no changes
v2: no changes
--- Documentation/devicetree/bindings/arm/fsl.yaml | 3 +++ 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/arm/fsl.yaml +3 -0
@@ -405,6 +405,9 @@ properties: - beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit - fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board - fsl,imx8mm-evk # i.MX8MM EVK Board + - gw,imx8mm-gw71xx-0x # i.MX8MM Gateworks Development Kit + - gw,imx8mm-gw72xx-0x # i.MX8MM Gateworks Development Kit + - gw,imx8mm-gw73xx-0x # i.MX8MM Gateworks Development Kit - variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module - const: fsl,imx8mm
Signature · 1 line
2.7.4
PATCH v4 2/2 arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits
The Gateworks Venice GW71xx-0x/GW72xx-0x/GW73xx-0x are development kits comprised of a GW700x SoM and a Baseboard. Future SoM's such as the GW701x will create additional combinations.
The GW700x SoM contains:
- i.MX 8M Mini SoC
- LPDDR4 DRAM
- eMMC FLASH
- Gateworks System Controller (eeprom/pushbutton/reset/voltage-monitor)
- GbE PHY connected to the i.MX 8M Mini FEC
- Power Management IC
The GW71xx Baseboard contains:
- 1x MiniPCIe Socket with USB2.0, PCIe, and SIM
- 1x RJ45 GbE (i.MX 8M Mini FEC)
- I/O connector with 1x-SPI/1x-I2C/1x-UART/4x-GPIO signals
- PCIe Clock generator
- GPS and accelerometer
- 1x USB 2.0 Front Panel connector
- wide range power supply
The GW72xx Baseboard contains:
- 2x MiniPCIe Socket with USB2.0, PCIe, and SIM
- 2x RJ45 GbE (i.MX 8M Mini FEC and LAN743x)
- 1x MicroSD connector
- 1x USB 2.0 Front Panel connector
- 1x SPI connector
- 1x Serial connector supporting 2x-UART or 1x-UART configured as 1 of:
RS232 w/ flow-controll, RS485, RS422
- PCIe Clock generator
- GPS and accelerometer
- Media Expansion connector (MIPI-CSI/MIPI-DSI/GPIO/I2S)
- I/O connector with 2x-ADC,2x-GPIO,1x-UART,1x-I2C
- wide range power supply
The GW73xx Baseboard contains:
- 3x MiniPCIe Socket with USB2.0, PCIe, and SIM
- 2x RJ45 GbE (i.MX 8M Mini FEC and LAN743x)
- 1x MicroSD connector
- 1x USB 2.0 Front Panel connector
- 1x SPI connector
- 1x Serial connector supporting 2x-UART or 1x-UART configured as 1 of:
RS232 w/ flow-controll, RS485, RS422
- WiFi/BT
- PCIe Clock generator
- GPS and accelerometer
- Media Expansion connector (MIPI-CSI/MIPI-DSI/GPIO/I2S)
- I/O connector with 2x-ADC,2x-GPIO,1x-UART,1x-I2C
- wide range power supply
---
v4:
- replace underscore with hyphen for gpio-keys node
- add 'off-board header' comments to i2c/spi/uart nodes that go off-board
- move node comments to own line above node
- add spaces after comma
- move uart2_gpio rs485 config pinmux to hoggroup as they don't necessarily relate to uart2
- fix fifo-depth dt property for phy
v3:
- fix gpio controller node name
- add rtc node to SoM
- add pmic pinctrl to SoM
- fixed compatible string for SoM eeprom's
v2:
- fix i.MX 8M Mini name in commit log
- consistent use of underscore vs hyphen in labels
- fix gsc interrupt type
- fix iomux group node names
- fix led-controller bindings:
(use correct node names, color, function and remove label)
- use accelerometer node name vs accel
- remove sai3 from gw71xx baseboard
- added serial connector description to commit message
- added I/O connector description to commit message
- removed unnecessary #address-cells/#size-cells from gpio-keys node
--- arch/arm64/boot/dts/freescale/Makefile | 3 + .../boot/dts/freescale/imx8mm-venice-gw700x.dtsi | 497 +++++++++++++++++++++ .../boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts | 19 + .../boot/dts/freescale/imx8mm-venice-gw71xx.dtsi | 186 ++++++++ .../boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts | 20 + .../boot/dts/freescale/imx8mm-venice-gw72xx.dtsi | 314 +++++++++++++ .../boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts | 19 + .../boot/dts/freescale/imx8mm-venice-gw73xx.dtsi | 366 +++++++++++++++ 8 files changed, 1424 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
arch/arm64/boot/dts/freescale/Makefile +3 -0
@@ -32,6 +32,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi new file +497 -0
497 lines not on this page · raw message
arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts new file +19 -0
@@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +/dts-v1/; + +#include "imx8mm.dtsi" +#include "imx8mm-venice-gw700x.dtsi" +#include "imx8mm-venice-gw71xx.dtsi" + +/ { + model = "Gateworks Venice GW71xx-0x i.MX8MM Development Kit"; + compatible = "gw,imx8mm-gw71xx-0x", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; +};
arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi new file +186 -0
186 lines not on this page · raw message
arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts new file +20 -0
@@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +/dts-v1/; + +#include "imx8mm.dtsi" +#include "imx8mm-venice-gw700x.dtsi" +#include "imx8mm-venice-gw72xx.dtsi" + +/ { + model = "Gateworks Venice GW72xx-0x i.MX8MM Development Kit"; + compatible = "gw,imx8mm-gw72xx-0x", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; +}; +
arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi new file +314 -0
314 lines not on this page · raw message
arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts new file +19 -0
@@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +/dts-v1/; + +#include "imx8mm.dtsi" +#include "imx8mm-venice-gw700x.dtsi" +#include "imx8mm-venice-gw73xx.dtsi" + +/ { + model = "Gateworks Venice GW73xx-0x i.MX8MM Development Kit"; + compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; +};
arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi new file +366 -0
366 lines not on this page · raw message
Signature · 1 line
2.7.4
Re: [PATCH v4 2/2] arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits
Quoted 128 lines · Tim Harvey
The Gateworks Venice GW71xx-0x/GW72xx-0x/GW73xx-0x are development kits comprised of a GW700x SoM and a Baseboard. Future SoM's such as the GW701x will create additional combinations.
The GW700x SoM contains:
- i.MX 8M Mini SoC
- LPDDR4 DRAM
- eMMC FLASH
- Gateworks System Controller (eeprom/pushbutton/reset/voltage-monitor)
- GbE PHY connected to the i.MX 8M Mini FEC
- Power Management ICThe GW71xx Baseboard contains:
- 1x MiniPCIe Socket with USB2.0, PCIe, and SIM
- 1x RJ45 GbE (i.MX 8M Mini FEC)
- I/O connector with 1x-SPI/1x-I2C/1x-UART/4x-GPIO signals
- PCIe Clock generator
- GPS and accelerometer
- 1x USB 2.0 Front Panel connector
- wide range power supplyThe GW72xx Baseboard contains:
- 2x MiniPCIe Socket with USB2.0, PCIe, and SIM
- 2x RJ45 GbE (i.MX 8M Mini FEC and LAN743x)
- 1x MicroSD connector
- 1x USB 2.0 Front Panel connector
- 1x SPI connector
- 1x Serial connector supporting 2x-UART or 1x-UART configured as 1 of:RS232 w/ flow-controll, RS485, RS422- PCIe Clock generator
- GPS and accelerometer
- Media Expansion connector (MIPI-CSI/MIPI-DSI/GPIO/I2S)
- I/O connector with 2x-ADC,2x-GPIO,1x-UART,1x-I2C
- wide range power supplyThe GW73xx Baseboard contains:
- 3x MiniPCIe Socket with USB2.0, PCIe, and SIM
- 2x RJ45 GbE (i.MX 8M Mini FEC and LAN743x)
- 1x MicroSD connector
- 1x USB 2.0 Front Panel connector
- 1x SPI connector
- 1x Serial connector supporting 2x-UART or 1x-UART configured as 1 of:RS232 w/ flow-controll, RS485, RS422- WiFi/BT
- PCIe Clock generator
- GPS and accelerometer
- Media Expansion connector (MIPI-CSI/MIPI-DSI/GPIO/I2S)
- I/O connector with 2x-ADC,2x-GPIO,1x-UART,1x-I2C
- wide range power supplySigned-off-by Tim Harvey <[email protected]>---
v4:
- replace underscore with hyphen for gpio-keys node
- add 'off-board header' comments to i2c/spi/uart nodes that go off-board
- move node comments to own line above node
- add spaces after comma
- moveuart2_gpiors485 config pinmux to hoggroup as they don't necessarily relate to uart2
- fix fifo-depth dt property for phyv3:
- fix gpio controller node name
- add rtc node to SoM
- add pmic pinctrl to SoM
- fixed compatible string for SoM eeprom'sv2:
- fix i.MX 8M Mini name in commit log
- consistent use of underscore vs hyphen in labels
- fix gsc interrupt type
- fix iomux group node names
- fix led-controller bindings:
(use correct node names, color, function and remove label)
- use accelerometer node name vs accel
- remove sai3 from gw71xx baseboard
- added serial connector description to commit message
- added I/O connector description to commit message
- removed unnecessary #address-cells/#size-cells from gpio-keys nodeSigned-off-by Tim Harvey <[email protected]>--- arch/arm64/boot/dts/freescale/Makefile | 3 + .../boot/dts/freescale/imx8mm-venice-gw700x.dtsi | 497 +++++++++++++++++++++ .../boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts | 19 + .../boot/dts/freescale/imx8mm-venice-gw71xx.dtsi | 186 ++++++++ .../boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts | 20 + .../boot/dts/freescale/imx8mm-venice-gw72xx.dtsi | 314 +++++++++++++ .../boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts | 19 + .../boot/dts/freescale/imx8mm-venice-gw73xx.dtsi | 366 +++++++++++++++ 8 files changed, 1424 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsiarch/arm64/boot/dts/freescale/Makefile +3
-0@@ -32,6 +32,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtbarch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi new file +9
-0@@ -0,0 +1,497 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/net/ti-dp83867.h> +
arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi line 19
Quoted 10 lines
arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi new file +10
-0+/ { + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + user_pb {
All these nodes as well - hyphens instead of underscore.
Quoted 30 lines
arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi new file +30
-0+ label = "user_pb"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key_erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>;
arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi line 59
Quoted 10 lines
arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi new file +10
-0+ interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + };
Rest of DTS looks ok, thanks!
Best regards,
Krzysztof
Re: [PATCH v4 2/2] arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits
Quoted 134 lines · Krzysztof Kozlowski
Quoted 132 lines · Tim Harvey
The Gateworks Venice GW71xx-0x/GW72xx-0x/GW73xx-0x are development kits comprised of a GW700x SoM and a Baseboard. Future SoM's such as the GW701x will create additional combinations.
The GW700x SoM contains:
- i.MX 8M Mini SoC
- LPDDR4 DRAM
- eMMC FLASH
- Gateworks System Controller (eeprom/pushbutton/reset/voltage-monitor)
- GbE PHY connected to the i.MX 8M Mini FEC
- Power Management ICThe GW71xx Baseboard contains:
- 1x MiniPCIe Socket with USB2.0, PCIe, and SIM
- 1x RJ45 GbE (i.MX 8M Mini FEC)
- I/O connector with 1x-SPI/1x-I2C/1x-UART/4x-GPIO signals
- PCIe Clock generator
- GPS and accelerometer
- 1x USB 2.0 Front Panel connector
- wide range power supplyThe GW72xx Baseboard contains:
- 2x MiniPCIe Socket with USB2.0, PCIe, and SIM
- 2x RJ45 GbE (i.MX 8M Mini FEC and LAN743x)
- 1x MicroSD connector
- 1x USB 2.0 Front Panel connector
- 1x SPI connector
- 1x Serial connector supporting 2x-UART or 1x-UART configured as 1 of:RS232 w/ flow-controll, RS485, RS422- PCIe Clock generator
- GPS and accelerometer
- Media Expansion connector (MIPI-CSI/MIPI-DSI/GPIO/I2S)
- I/O connector with 2x-ADC,2x-GPIO,1x-UART,1x-I2C
- wide range power supplyThe GW73xx Baseboard contains:
- 3x MiniPCIe Socket with USB2.0, PCIe, and SIM
- 2x RJ45 GbE (i.MX 8M Mini FEC and LAN743x)
- 1x MicroSD connector
- 1x USB 2.0 Front Panel connector
- 1x SPI connector
- 1x Serial connector supporting 2x-UART or 1x-UART configured as 1 of:RS232 w/ flow-controll, RS485, RS422- WiFi/BT
- PCIe Clock generator
- GPS and accelerometer
- Media Expansion connector (MIPI-CSI/MIPI-DSI/GPIO/I2S)
- I/O connector with 2x-ADC,2x-GPIO,1x-UART,1x-I2C
- wide range power supplySigned-off-by Tim Harvey <[email protected]>---
v4:
- replace underscore with hyphen for gpio-keys node
- add 'off-board header' comments to i2c/spi/uart nodes that go off-board
- move node comments to own line above node
- add spaces after comma
- moveuart2_gpiors485 config pinmux to hoggroup as they don't necessarily relate to uart2
- fix fifo-depth dt property for phyv3:
- fix gpio controller node name
- add rtc node to SoM
- add pmic pinctrl to SoM
- fixed compatible string for SoM eeprom'sv2:
- fix i.MX 8M Mini name in commit log
- consistent use of underscore vs hyphen in labels
- fix gsc interrupt type
- fix iomux group node names
- fix led-controller bindings:
(use correct node names, color, function and remove label)
- use accelerometer node name vs accel
- remove sai3 from gw71xx baseboard
- added serial connector description to commit message
- added I/O connector description to commit message
- removed unnecessary #address-cells/#size-cells from gpio-keys nodeSigned-off-by Tim Harvey <[email protected]>--- arch/arm64/boot/dts/freescale/Makefile | 3 + .../boot/dts/freescale/imx8mm-venice-gw700x.dtsi | 497 +++++++++++++++++++++ .../boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts | 19 + .../boot/dts/freescale/imx8mm-venice-gw71xx.dtsi | 186 ++++++++ .../boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts | 20 + .../boot/dts/freescale/imx8mm-venice-gw72xx.dtsi | 314 +++++++++++++ .../boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts | 19 + .../boot/dts/freescale/imx8mm-venice-gw73xx.dtsi | 366 +++++++++++++++ 8 files changed, 1424 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsiarch/arm64/boot/dts/freescale/Makefile +3
-0@@ -32,6 +32,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtbarch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi new file +13
-0@@ -0,0 +1,497 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/net/ti-dp83867.h> + +/ { + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>;
Quoted 8 lines
arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi line 19
Quoted 6 lines
arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi new file +6
-0+ }; + + gpio-keys { + compatible = "gpio-keys"; + + user_pb {All these nodes as well - hyphens instead of underscore.
will fix
Quoted 36 lines
Quoted 36 lines
arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi new file +34
-0+ label = "user_pb"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key_erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold {
Quoted 9 lines
arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi line 59
Quoted 6 lines
arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi new file +6
-0+ label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + };Rest of DTS looks ok, thanks!
Great - thank you so much for the reviews! I will follow-up shortly with another revision.
Best regards and Happy New Year!
Tim