Skip to contentSkip to conversation

pinctrl: qcom: sc7280: Add GPIO wakeup interrupt map

PATCH Applied Rajendra Nayak 4 participants 4 messages Feb 12, 2021 – May 26, 2021

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 pinctrl: qcom: sc7280: Add GPIO wakeup interrupt map

From: Maulik Shah <[email protected]>

GPIOs that can be configured as wakeup sources, have their interrupt lines routed to PDC interrupt controller.

Provide the interrupt map of the GPIO to its wakeup capable interrupt parent.

---
 drivers/pinctrl/qcom/pinctrl-sc7280.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
drivers/pinctrl/qcom/pinctrl-sc7280.c +24 -0
index 8daccd5..99c416e 100644
@@ -1449,6 +1449,28 @@ static const struct msm_pingroup sc7280_groups[] = {
 	[182] = SDC_QDSD_PINGROUP(sdc2_data, 0x1b4000, 9, 0),
 };
 
+static const struct msm_gpio_wakeirq_map sc7280_pdc_map[] = {
+	{ 0, 134 }, { 3, 131 }, { 4, 121 }, { 7, 103 }, { 8, 155 },
+	{ 11, 93 }, { 12, 78 }, { 15, 79 }, { 16, 80 }, { 18, 81 },
+	{ 19, 107 }, { 20, 82 }, { 21, 83 }, { 23, 99 }, { 24, 86 },
+	{ 25, 95 }, { 27, 158 }, { 28, 159 }, { 31, 90 }, { 32, 144 },
+	{ 34, 77 }, { 35, 92 }, { 36, 157 }, { 39, 73 }, { 40, 97 },
+	{ 41, 98 }, { 43, 85 }, { 44, 100 }, { 45, 101 }, { 47, 102 },
+	{ 48, 74 }, { 51, 112 }, { 52, 156 }, { 54, 117 }, { 55, 84 },
+	{ 56, 108 }, { 59, 110 }, { 60, 111 }, { 61, 123 }, { 63, 104 },
+	{ 68, 127 }, { 72, 150 }, { 75, 133 }, { 77, 125 }, { 78, 105 },
+	{ 79, 106 }, { 80, 118 }, { 81, 119 }, { 82, 162 }, { 83, 122 },
+	{ 86, 75 }, { 88, 154 }, { 89, 124 }, { 90, 149 }, { 91, 76 },
+	{ 93, 128 }, { 95, 160 }, { 101, 126 }, { 102, 96 }, { 103, 116 },
+	{ 104, 114 }, { 112, 72 }, { 116, 135 }, { 117, 163 }, { 119, 137 },
+	{ 121, 138 }, { 123, 139 }, { 125, 140 }, { 127, 141 }, { 128, 165 },
+	{ 129, 143 }, { 130, 94 }, { 131, 145 }, { 133, 146 }, { 136, 147 },
+	{ 140, 148 }, { 141, 115 }, { 142, 113 }, { 145, 130 }, { 148, 132 },
+	{ 150, 87 }, { 151, 88 }, { 153, 89 }, { 155, 164 }, { 156, 129 },
+	{ 157, 161 }, { 158, 120 }, { 161, 136 }, { 163, 142 }, { 172, 166 },
+	{ 174, 167 },
+};
+
 static const struct msm_pinctrl_soc_data sc7280_pinctrl = {
 	.pins = sc7280_pins,
 	.npins = ARRAY_SIZE(sc7280_pins),
@@ -1457,6 +1479,8 @@ static const struct msm_pinctrl_soc_data sc7280_pinctrl = {
 	.groups = sc7280_groups,
 	.ngroups = ARRAY_SIZE(sc7280_groups),
 	.ngpios = 176,
+	.wakeirq_map = sc7280_pdc_map,
+	.nwakeirq_map = ARRAY_SIZE(sc7280_pdc_map),
 };
 
 static int sc7280_pinctrl_probe(struct platform_device *pdev)
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
Acked-by on v1 1/1
#1 lore raw
Quoted 8 lines · Rajendra Nayak

From: Maulik Shah <[email protected]>

GPIOs that can be configured as wakeup sources, have their interrupt lines routed to PDC interrupt controller.

Provide the interrupt map of the GPIO to its wakeup capable interrupt parent.

Regards,
Bjorn

Quoted 52 lines
---
 drivers/pinctrl/qcom/pinctrl-sc7280.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
drivers/pinctrl/qcom/pinctrl-sc7280.c +24 -0
index 8daccd5..99c416e 100644
@@ -1449,6 +1449,28 @@ static const struct msm_pingroup sc7280_groups[] = {
 	[182] = SDC_QDSD_PINGROUP(sdc2_data, 0x1b4000, 9, 0),
 };
 
+static const struct msm_gpio_wakeirq_map sc7280_pdc_map[] = {
+	{ 0, 134 }, { 3, 131 }, { 4, 121 }, { 7, 103 }, { 8, 155 },
+	{ 11, 93 }, { 12, 78 }, { 15, 79 }, { 16, 80 }, { 18, 81 },
+	{ 19, 107 }, { 20, 82 }, { 21, 83 }, { 23, 99 }, { 24, 86 },
+	{ 25, 95 }, { 27, 158 }, { 28, 159 }, { 31, 90 }, { 32, 144 },
+	{ 34, 77 }, { 35, 92 }, { 36, 157 }, { 39, 73 }, { 40, 97 },
+	{ 41, 98 }, { 43, 85 }, { 44, 100 }, { 45, 101 }, { 47, 102 },
+	{ 48, 74 }, { 51, 112 }, { 52, 156 }, { 54, 117 }, { 55, 84 },
+	{ 56, 108 }, { 59, 110 }, { 60, 111 }, { 61, 123 }, { 63, 104 },
+	{ 68, 127 }, { 72, 150 }, { 75, 133 }, { 77, 125 }, { 78, 105 },
+	{ 79, 106 }, { 80, 118 }, { 81, 119 }, { 82, 162 }, { 83, 122 },
+	{ 86, 75 }, { 88, 154 }, { 89, 124 }, { 90, 149 }, { 91, 76 },
+	{ 93, 128 }, { 95, 160 }, { 101, 126 }, { 102, 96 }, { 103, 116 },
+	{ 104, 114 }, { 112, 72 }, { 116, 135 }, { 117, 163 }, { 119, 137 },
+	{ 121, 138 }, { 123, 139 }, { 125, 140 }, { 127, 141 }, { 128, 165 },
+	{ 129, 143 }, { 130, 94 }, { 131, 145 }, { 133, 146 }, { 136, 147 },
+	{ 140, 148 }, { 141, 115 }, { 142, 113 }, { 145, 130 }, { 148, 132 },
+	{ 150, 87 }, { 151, 88 }, { 153, 89 }, { 155, 164 }, { 156, 129 },
+	{ 157, 161 }, { 158, 120 }, { 161, 136 }, { 163, 142 }, { 172, 166 },
+	{ 174, 167 },
+};
+
 static const struct msm_pinctrl_soc_data sc7280_pinctrl = {
 	.pins = sc7280_pins,
 	.npins = ARRAY_SIZE(sc7280_pins),
@@ -1457,6 +1479,8 @@ static const struct msm_pinctrl_soc_data sc7280_pinctrl = {
 	.groups = sc7280_groups,
 	.ngroups = ARRAY_SIZE(sc7280_groups),
 	.ngpios = 176,
+	.wakeirq_map = sc7280_pdc_map,
+	.nwakeirq_map = ARRAY_SIZE(sc7280_pdc_map),
 };
 
 static int sc7280_pinctrl_probe(struct platform_device *pdev)
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
#3 lore raw
In reply to Rajendra Nayak
This patch was applied to qcom/linux.git (refs/heads/for-next):

Hello:

This patch was applied to qcom/linux.git (refs/heads/for-next):

Quoted 9 lines · On Fri, 12 Feb 2021 10:29:34 +0530 you wrote:

From: Maulik Shah <[email protected]>

GPIOs that can be configured as wakeup sources, have their interrupt lines routed to PDC interrupt controller.

Provide the interrupt map of the GPIO to its wakeup capable interrupt parent.

[...]

Here is the summary with links:
- pinctrl: qcom: sc7280: Add GPIO wakeup interrupt map

    https://git.kernel.org/qcom/c/35b25fd32b5f

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html