pinctrl: qcom: sc7280: Add GPIO wakeup interrupt map
Subsystems (5)
PATCH 1/1 pinctrl: qcom: sc7280: Add GPIO wakeup interrupt map
From: Maulik Shah <[email protected]>
GPIOs that can be configured as wakeup sources, have their interrupt lines routed to PDC interrupt controller.
Provide the interrupt map of the GPIO to its wakeup capable interrupt parent.
--- drivers/pinctrl/qcom/pinctrl-sc7280.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)
drivers/pinctrl/qcom/pinctrl-sc7280.c +24 -0
@@ -1449,6 +1449,28 @@ static const struct msm_pingroup sc7280_groups[] = { [182] = SDC_QDSD_PINGROUP(sdc2_data, 0x1b4000, 9, 0), }; +static const struct msm_gpio_wakeirq_map sc7280_pdc_map[] = { + {0 ,134 }, {3 ,131 }, {4 ,121 }, {7 ,103 }, {8 ,155 }, + {11 ,93 }, {12 ,78 }, {15 ,79 }, {16 ,80 }, {18 ,81 }, + {19 ,107 }, {20 ,82 }, {21 ,83 }, {23 ,99 }, {24 ,86 }, + {25 ,95 }, {27 ,158 }, {28 ,159 }, {31 ,90 }, {32 ,144 }, + {34 ,77 }, {35 ,92 }, {36 ,157 }, {39 ,73 }, {40 ,97 }, + {41 ,98 }, {43 ,85 }, {44 ,100 }, {45 ,101 }, {47 ,102 }, + {48 ,74 }, {51 ,112 }, {52 ,156 }, {54 ,117 }, {55 ,84 }, + {56 ,108 }, {59 ,110 }, {60 ,111 }, {61 ,123 }, {63 ,104 }, + {68 ,127 }, {72 ,150 }, {75 ,133 }, {77 ,125 }, {78 ,105 }, + {79 ,106 }, {80 ,118 }, {81 ,119 }, {82 ,162 }, {83 ,122 }, + {86 ,75 }, {88 ,154 }, {89 ,124 }, {90 ,149 }, {91 ,76 }, + {93 ,128 }, {95 ,160 }, {101 ,126 }, {102 ,96 }, {103 ,116 }, + {104 ,114 }, {112 ,72 }, {116 ,135 }, {117 ,163 }, {119 ,137 }, + {121 ,138 }, {123 ,139 }, {125 ,140 }, {127 ,141 }, {128 ,165 }, + {129 ,143 }, {130 ,94 }, {131 ,145 }, {133 ,146 }, {136 ,147 }, + {140 ,148 }, {141 ,115 }, {142 ,113 }, {145 ,130 }, {148 ,132 }, + {150 ,87 }, {151 ,88 }, {153 ,89 }, {155 ,164 }, {156 ,129 }, + {157 ,161 }, {158 ,120 }, {161 ,136 }, {163 ,142 }, {172 ,166 }, + {174 ,167 }, +}; +static const struct msm_pinctrl_soc_data sc7280_pinctrl = { .pins = sc7280_pins, .npins =ARRAY_SIZE (sc7280_pins),
@@ -1457,6 +1479,8 @@ static const struct msm_pinctrl_soc_data sc7280_pinctrl = { .groups = sc7280_groups, .ngroups = ARRAY_SIZE(sc7280_groups), .ngpios = 176, + .wakeirq_map = sc7280_pdc_map, + .nwakeirq_map = ARRAY_SIZE(sc7280_pdc_map), };static int sc7280_pinctrl_probe (struct platform_device *pdev)
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Quoted 8 lines · Rajendra Nayak
From: Maulik Shah <[email protected]>
GPIOs that can be configured as wakeup sources, have their interrupt lines routed to PDC interrupt controller.
Provide the interrupt map of the GPIO to its wakeup capable interrupt parent.
Regards,
Bjorn
Quoted 52 lines
Signed-off-by Maulik Shah <[email protected]>Signed-off-by Rajendra Nayak <[email protected]>--- drivers/pinctrl/qcom/pinctrl-sc7280.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)drivers/pinctrl/qcom/pinctrl-sc7280.c +24
-0@@ -1449,6 +1449,28 @@ static const struct msm_pingroup sc7280_groups[] = { [182] = SDC_QDSD_PINGROUP(sdc2_data, 0x1b4000, 9, 0), }; +static const struct msm_gpio_wakeirq_map sc7280_pdc_map[] = { + {0 ,134 }, {3 ,131 }, {4 ,121 }, {7 ,103 }, {8 ,155 }, + {11 ,93 }, {12 ,78 }, {15 ,79 }, {16 ,80 }, {18 ,81 }, + {19 ,107 }, {20 ,82 }, {21 ,83 }, {23 ,99 }, {24 ,86 }, + {25 ,95 }, {27 ,158 }, {28 ,159 }, {31 ,90 }, {32 ,144 }, + {34 ,77 }, {35 ,92 }, {36 ,157 }, {39 ,73 }, {40 ,97 }, + {41 ,98 }, {43 ,85 }, {44 ,100 }, {45 ,101 }, {47 ,102 }, + {48 ,74 }, {51 ,112 }, {52 ,156 }, {54 ,117 }, {55 ,84 }, + {56 ,108 }, {59 ,110 }, {60 ,111 }, {61 ,123 }, {63 ,104 }, + {68 ,127 }, {72 ,150 }, {75 ,133 }, {77 ,125 }, {78 ,105 }, + {79 ,106 }, {80 ,118 }, {81 ,119 }, {82 ,162 }, {83 ,122 }, + {86 ,75 }, {88 ,154 }, {89 ,124 }, {90 ,149 }, {91 ,76 }, + {93 ,128 }, {95 ,160 }, {101 ,126 }, {102 ,96 }, {103 ,116 }, + {104 ,114 }, {112 ,72 }, {116 ,135 }, {117 ,163 }, {119 ,137 }, + {121 ,138 }, {123 ,139 }, {125 ,140 }, {127 ,141 }, {128 ,165 }, + {129 ,143 }, {130 ,94 }, {131 ,145 }, {133 ,146 }, {136 ,147 }, + {140 ,148 }, {141 ,115 }, {142 ,113 }, {145 ,130 }, {148 ,132 }, + {150 ,87 }, {151 ,88 }, {153 ,89 }, {155 ,164 }, {156 ,129 }, + {157 ,161 }, {158 ,120 }, {161 ,136 }, {163 ,142 }, {172 ,166 }, + {174 ,167 }, +}; +static const struct msm_pinctrl_soc_data sc7280_pinctrl = { .pins = sc7280_pins, .npins =ARRAY_SIZE (sc7280_pins),@@ -1457,6 +1479,8 @@ static const struct msm_pinctrl_soc_data sc7280_pinctrl = { .groups = sc7280_groups, .ngroups = ARRAY_SIZE(sc7280_groups), .ngpios = 176, + .wakeirq_map = sc7280_pdc_map, + .nwakeirq_map = ARRAY_SIZE(sc7280_pdc_map), };static int sc7280_pinctrl_probe (struct platform_device *pdev)Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Quoted 10 lines · Rajendra Nayak
From: Maulik Shah <[email protected]>
GPIOs that can be configured as wakeup sources, have their interrupt lines routed to PDC interrupt controller.
Provide the interrupt map of the GPIO to its wakeup capable interrupt parent.
Signed-off-by Maulik Shah <[email protected]>Signed-off-by Rajendra Nayak <[email protected]>
Patch applied.
Yours,
Linus Walleij
This patch was applied to qcom/linux.git (refs/heads/for-next):
Hello:
This patch was applied to qcom/linux.git (refs/heads/for-next):
Quoted 9 lines · On Fri, 12 Feb 2021 10:29:34 +0530 you wrote:
From: Maulik Shah <[email protected]>
GPIOs that can be configured as wakeup sources, have their interrupt lines routed to PDC interrupt controller.
Provide the interrupt map of the GPIO to its wakeup capable interrupt parent.
[...]
Here is the summary with links:
- pinctrl: qcom: sc7280: Add GPIO wakeup interrupt map
https://git.kernel.org/qcom/c/35b25fd32b5f
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html