Consolidate RPM interconnect and support to MSM8939
Subsystems (3)
v2 cover Consolidate RPM interconnect and support to MSM8939
This patch set split shared RPM based interconnect operation code and add support to MSM8939 interconnect.
Changes vs V1:
- Rebase to latest icc code.
- Remove unnecessary comment and info.
- Fix some format issues.
Jun Nie (5):
interconnect: qcom: Consolidate interconnect RPM support
interconnect: qcom: qcs404: use shared code
dt-bindings: interconnect: single yaml file for RPM interconnect
drivers
dt-bindings: interconnect: Add Qualcomm MSM8939 DT bindings
interconnect: qcom: Add MSM8939 interconnect provider driver
.../bindings/interconnect/qcom,qcs404.yaml | 77 ----
.../{qcom,msm8916.yaml => qcom,rpm.yaml} | 22 +-
drivers/interconnect/qcom/Kconfig | 9 +
drivers/interconnect/qcom/Makefile | 4 +-
drivers/interconnect/qcom/icc-rpm.c | 191 ++++++++++
drivers/interconnect/qcom/icc-rpm.h | 73 ++++
drivers/interconnect/qcom/msm8916.c | 241 +-----------
drivers/interconnect/qcom/msm8939.c | 355 ++++++++++++++++++
drivers/interconnect/qcom/qcs404.c | 242 +-----------
.../dt-bindings/interconnect/qcom,msm8939.h | 105 ++++++
10 files changed, 769 insertions(+), 550 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml
rename Documentation/devicetree/bindings/interconnect/{qcom,msm8916.yaml => qcom,rpm.yaml} (77%)
create mode 100644 drivers/interconnect/qcom/icc-rpm.c
create mode 100644 drivers/interconnect/qcom/icc-rpm.h
create mode 100644 drivers/interconnect/qcom/msm8939.c
create mode 100644 include/dt-bindings/interconnect/qcom,msm8939.hbase-commit: bfd521e1af519bb7096efc845f6a64a7de28c472
Signature · 1 line
2.17.1
PATCH v2 1/5 interconnect: qcom: Consolidate interconnect RPM support
Add RPM based interconnect driver implements the set and aggregate functionalities that translates bandwidth requests into RPM messages. These modules provide a common set of functionalities for all Qualcomm RPM based interconnect providers and should help reduce code duplication when adding new providers.
--- drivers/interconnect/qcom/Makefile | 2 +- drivers/interconnect/qcom/icc-rpm.c | 191 ++++++++++++++++++++++ drivers/interconnect/qcom/icc-rpm.h | 73 +++++++++ drivers/interconnect/qcom/msm8916.c | 241 ++-------------------------- 4 files changed, 275 insertions(+), 232 deletions(-) create mode 100644 drivers/interconnect/qcom/icc-rpm.c create mode 100644 drivers/interconnect/qcom/icc-rpm.h
drivers/interconnect/qcom/Makefile +1 -1
@@ -10,7 +10,7 @@ qnoc-sc7180-objs := sc7180.o qnoc-sdm845-objs := sdm845.o qnoc-sm8150-objs := sm8150.o qnoc-sm8250-objs := sm8250.o -icc-smd-rpm-objs := smd-rpm.o +icc-smd-rpm-objs := smd-rpm.o icc-rpm.o obj-$(CONFIG_INTERCONNECT_QCOM_BCM_VOTER) += icc-bcm-voter.o obj-$(CONFIG_INTERCONNECT_QCOM_MSM8916) += qnoc-msm8916.o
drivers/interconnect/qcom/icc-rpm.c new file +191 -0
191 lines not on this page · raw message
drivers/interconnect/qcom/icc-rpm.h new file +73 -0
73 lines not on this page · raw message
drivers/interconnect/qcom/msm8916.c +10 -231
302 lines not on this page · raw message
Signature · 1 line
2.17.1
Re: [PATCH v2 1/5] interconnect: qcom: Consolidate interconnect RPM support
Il 04/12/20 08:53, Jun Nie ha scritto:
Quoted 7 lines
Add RPM based interconnect driver implements the set and aggregate functionalities that translates bandwidth requests into RPM messages. These modules provide a common set of functionalities for all Qualcomm RPM based interconnect providers and should help reduce code duplication when adding new providers.
Signed-off-by Jun Nie <[email protected]>
Hello!
I agree, the RPM based ICC should be commonized... in any case, I think that you should rebase your patch series over mine, where I am adding support for SDM660 and also introducing a mechanism to set QoS, which can actually be used by most platforms managing the ICC over RPM.
Please, check it out: https://lore.kernel.org/patchwork/patch/1322131/
Thanks,
Angelo
Quoted 612 lines
--- drivers/interconnect/qcom/Makefile | 2 +- drivers/interconnect/qcom/icc-rpm.c | 191 ++++++++++++++++++++++ drivers/interconnect/qcom/icc-rpm.h | 73 +++++++++ drivers/interconnect/qcom/msm8916.c | 241 ++-------------------------- 4 files changed, 275 insertions(+), 232 deletions(-)create mode 100644
drivers/interconnect/qcom/icc-rpm.ccreate mode 100644drivers/interconnect/qcom/icc-rpm.hdrivers/interconnect/qcom/Makefile +1
-1@@ -10,7 +10,7 @@ qnoc-sc7180-objs := sc7180.o qnoc-sdm845-objs := sdm845.o qnoc-sm8150-objs := sm8150.o qnoc-sm8250-objs := sm8250.o -icc-smd-rpm-objs := smd-rpm.o +icc-smd-rpm-objs := smd-rpm.o icc-rpm.o obj-$(CONFIG_INTERCONNECT_QCOM_BCM_VOTER) += icc-bcm-voter.o obj-$(CONFIG_INTERCONNECT_QCOM_MSM8916) += qnoc-msm8916.odrivers/interconnect/qcom/icc-rpm.c new file +191
-0@@ -0,0 +1,191 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2020 Linaro Ltd +*/ + +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/interconnect-provider.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include "smd-rpm.h" +#include "icc-rpm.h" + +static int qcom_icc_set (struct icc_node *src,struct icc_node *dst) +{ +struct qcom_icc_provider *qp; +struct qcom_icc_node *qn; +struct icc_provider *provider; +struct icc_node *n; +u64 sum_bw; +u64 max_peak_bw; +u64 rate; +u32 agg_avg =0 ; +u32 agg_peak =0 ; +int ret, i; + + qn = src->data; + provider = src->provider; + qp =to_qcom_provider (provider); + +list_for_each_entry (n, &provider->nodes, node_list) + provider->aggregate (n,0 , n->avg_bw, n->peak_bw, + &agg_avg, &agg_peak); + + sum_bw =icc_units_to_bps (agg_avg); + max_peak_bw =icc_units_to_bps (agg_peak); + +/* send bandwidth request message to the RPM processor */ +if (qn->mas_rpm_id !=-1 ) { + ret =qcom_icc_rpm_smd_send (QCOM_SMD_RPM_ACTIVE_STATE , +RPM_BUS_MASTER_REQ , + qn->mas_rpm_id, + sum_bw); +if (ret) { +pr_err ("qcom_icc_rpm_smd_send mas %d error %d\n" , + qn->mas_rpm_id, ret); +return ret; + } + } + +if (qn->slv_rpm_id !=-1 ) { + ret =qcom_icc_rpm_smd_send (QCOM_SMD_RPM_ACTIVE_STATE , +RPM_BUS_SLAVE_REQ , + qn->slv_rpm_id, + sum_bw); +if (ret) { +pr_err ("qcom_icc_rpm_smd_send slv error %d\n" , + ret); +return ret; + } + } + + rate =max (sum_bw, max_peak_bw); + +do_div (rate, qn->buswidth); + +if (qn->rate == rate) +return 0 ; + +for (i =0 ; i < qp->num_clks; i++) { + ret =clk_set_rate (qp->bus_clks[i].clk, rate); +if (ret) { +pr_err ("%s clk_set_rate error: %d\n" , + qp->bus_clks[i].id, ret); +return ret; + } + } + + qn->rate = rate; + +return 0 ; +} + +int qnoc_probe (struct platform_device *pdev,size_t cd_size,int cd_num, +const struct clk_bulk_data *cd) +{ +struct device *dev = &pdev->dev; +const struct qcom_icc_desc *desc; +struct icc_onecell_data *data; +struct icc_provider *provider; +struct qcom_icc_node **qnodes; +struct qcom_icc_provider *qp; +struct icc_node *node; +size_t num_nodes, i; +int ret; + +/* wait for the RPM proxy */ +if (!qcom_icc_rpm_smd_available ()) +return -EPROBE_DEFER ; + + desc =of_device_get_match_data (dev); +if (!desc) +return -EINVAL ; + + qnodes = desc->nodes; + num_nodes = desc->num_nodes; + + qp =devm_kzalloc (dev,sizeof (*qp),GFP_KERNEL ); +if (!qp) +return -ENOMEM ; + + data =devm_kzalloc (dev,struct_size (data, nodes, num_nodes), +GFP_KERNEL ); +if (!data) +return -ENOMEM ; + + qp->bus_clks =devm_kmemdup (dev, cd, cd_size, +GFP_KERNEL ); +if (!qp->bus_clks) +return -ENOMEM ; + + qp->num_clks = cd_num; + ret =devm_clk_bulk_get (dev, qp->num_clks, qp->bus_clks); +if (ret) +return ret; + + ret =clk_bulk_prepare_enable (qp->num_clks, qp->bus_clks); +if (ret) +return ret; + + provider = &qp->provider; +INIT_LIST_HEAD (&provider->nodes); + provider->dev = dev; + provider->set = qcom_icc_set; + provider->aggregate = icc_std_aggregate; + provider->xlate = of_icc_xlate_onecell; + provider->data = data; + + ret =icc_provider_add (provider); +if (ret) { +dev_err (dev,"error adding interconnect provider: %d\n" , ret); +clk_bulk_disable_unprepare (qp->num_clks, qp->bus_clks); +return ret; + } + +for (i =0 ; i < num_nodes; i++) { +size_t j; + + node =icc_node_create (qnodes[i]->id); +if (IS_ERR (node)) { + ret =PTR_ERR (node); + goto err; + } + + node->name = qnodes[i]->name; + node->data = qnodes[i]; +icc_node_add (node, provider); + +for (j =0 ; j < qnodes[i]->num_links; j++) +icc_link_create (node, qnodes[i]->links[j]); + + data->nodes[i] = node; + } + data->num_nodes = num_nodes; + +platform_set_drvdata (pdev, qp); + +return 0 ; +err: +icc_nodes_remove (provider); +clk_bulk_disable_unprepare (qp->num_clks, qp->bus_clks); +icc_provider_del (provider); + +return ret; +} +EXPORT_SYMBOL (qnoc_probe); + +int qnoc_remove (struct platform_device *pdev) +{ +struct qcom_icc_provider *qp =platform_get_drvdata (pdev); + +icc_nodes_remove (&qp->provider); +clk_bulk_disable_unprepare (qp->num_clks, qp->bus_clks); +return icc_provider_del (&qp->provider); +} +EXPORT_SYMBOL (qnoc_remove);drivers/interconnect/qcom/icc-rpm.h new file +73
-0@@ -0,0 +1,73 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2020 Linaro Ltd +*/ + +#ifndef __DRIVERS_INTERCONNECT_QCOM_ICC_RPM_H +#define __DRIVERS_INTERCONNECT_QCOM_ICC_RPM_H + +#define RPM_BUS_MASTER_REQ 0x73616d62 +#define RPM_BUS_SLAVE_REQ 0x766c7362 + +#define QCOM_MAX_LINKS 12 + +#define to_qcom_provider (_provider) \ + container_of(_provider, struct qcom_icc_provider, provider) + +/** +* struct qcom_icc_provider - Qualcomm specific interconnect provider +* @provider: generic interconnect provider +* @bus_clks: the clk_bulk_data table of bus clocks +* @num_clks: the total number of clk_bulk_data entries +*/ +struct qcom_icc_provider { +struct icc_provider provider; +struct clk_bulk_data *bus_clks; +int num_clks; +}; + +/** +* struct qcom_icc_node - Qualcomm specific interconnect nodes +* @name: the node name used in debugfs +* @id: a unique node identifier +* @links: an array of nodes where we can go next while traversing +* @num_links: the total number of @links +* @buswidth: width of the interconnect between a node and the bus (bytes) +* @mas_rpm_id: RPM id for devices that are bus masters +* @slv_rpm_id: RPM id for devices that are bus slaves +* @rate: current bus clock rate in Hz +*/ +struct qcom_icc_node { +unsigned char *name; +u16 id; +u16 links[QCOM_MAX_LINKS ]; +u16 num_links; +u16 buswidth; +int mas_rpm_id; +int slv_rpm_id; +u64 rate; +}; + +struct qcom_icc_desc { +struct qcom_icc_node **nodes; +size_t num_nodes; +}; + +#define DEFINE_QNODE (_name, _id, _buswidth, _mas_rpm_id, _slv_rpm_id, \ + ...) \ + static struct qcom_icc_node _name = { \ + .name = #_name, \ + .id = _id, \ + .buswidth = _buswidth, \ + .mas_rpm_id = _mas_rpm_id, \ + .slv_rpm_id = _slv_rpm_id, \ + .num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })), \ + .links = { __VA_ARGS__ }, \ + } + + +int qnoc_probe (struct platform_device *pdev,size_t cd_size,int cd_num, +const struct clk_bulk_data *cd); +int qnoc_remove (struct platform_device *pdev); + +#endif drivers/interconnect/qcom/msm8916.c +10
-231@@ -15,9 +15,7 @@#include <dt-bindings/interconnect/qcom,msm8916.h> #include "smd-rpm.h" - -#define RPM_BUS_MASTER_REQ 0x73616d62 -#define RPM_BUS_SLAVE_REQ 0x766c7362 +#include "icc-rpm.h" enum {MSM8916_BIMC_SNOC_MAS =1 ,@@ -107,67 +105,11 @@ enum { MSM8916_SNOC_PNOC_SLV, }; -#define to_msm8916_provider (_provider) \ - container_of(_provider, struct msm8916_icc_provider, provider) -static const struct clk_bulk_data msm8916_bus_clocks[] = { { .id ="bus" }, { .id ="bus_a" }, }; -/** -* struct msm8916_icc_provider - Qualcomm specific interconnect provider -* @provider: generic interconnect provider -* @bus_clks: the clk_bulk_data table of bus clocks -* @num_clks: the total number of clk_bulk_data entries -*/ -struct msm8916_icc_provider { -struct icc_provider provider; -struct clk_bulk_data *bus_clks; -int num_clks; -}; - -#define MSM8916_MAX_LINKS 8 - -/** -* struct msm8916_icc_node - Qualcomm specific interconnect nodes -* @name: the node name used in debugfs -* @id: a unique node identifier -* @links: an array of nodes where we can go next while traversing -* @num_links: the total number of @links -* @buswidth: width of the interconnect between a node and the bus (bytes) -* @mas_rpm_id: RPM ID for devices that are bus masters -* @slv_rpm_id: RPM ID for devices that are bus slaves -* @rate: current bus clock rate in Hz -*/ -struct msm8916_icc_node { -unsigned char *name; -u16 id; -u16 links[MSM8916_MAX_LINKS ]; -u16 num_links; -u16 buswidth; -int mas_rpm_id; -int slv_rpm_id; -u64 rate; -}; - -struct msm8916_icc_desc { -struct msm8916_icc_node **nodes; -size_t num_nodes; -}; - -#define DEFINE_QNODE (_name, _id, _buswidth, _mas_rpm_id, _slv_rpm_id, \ - ...) \ - static struct msm8916_icc_node _name = { \ - .name = #_name, \ - .id = _id, \ - .buswidth = _buswidth, \ - .mas_rpm_id = _mas_rpm_id, \ - .slv_rpm_id = _slv_rpm_id, \ - .num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })), \ - .links = { __VA_ARGS__ }, \ - } -DEFINE_QNODE (bimc_snoc_mas,MSM8916_BIMC_SNOC_MAS ,8 ,-1 ,-1 ,MSM8916_BIMC_SNOC_SLV );DEFINE_QNODE (bimc_snoc_slv,MSM8916_BIMC_SNOC_SLV ,8 ,-1 ,-1 ,MSM8916_SNOC_INT_0 ,MSM8916_SNOC_INT_1 );DEFINE_QNODE (mas_apss,MSM8916_MASTER_AMPSS_M0 ,8 ,-1 ,-1 ,MSM8916_SLAVE_EBI_CH0 ,MSM8916_BIMC_SNOC_MAS ,MSM8916_SLAVE_AMPSS_L2 );@@ -254,7 +196,7 @@ DEFINE_QNODE(snoc_int_bimc, MSM8916_SNOC_INT_BIMC, 8, 101, 132, MSM8916_SNOC_BIMDEFINE_QNODE (snoc_pcnoc_mas,MSM8916_SNOC_PNOC_MAS ,8 ,-1 ,-1 ,MSM8916_SNOC_PNOC_SLV );DEFINE_QNODE (snoc_pcnoc_slv,MSM8916_SNOC_PNOC_SLV ,8 ,-1 ,-1 ,MSM8916_PNOC_INT_0 ); -static struct msm8916_icc_node *msm8916_snoc_nodes[] = { +static struct qcom_icc_node *msm8916_snoc_nodes[] = { [BIMC_SNOC_SLV ] = &bimc_snoc_slv, [MASTER_JPEG ] = &mas_jpeg, [MASTER_MDP_PORT0 ] = &mas_mdp,@@ -283,12 +225,12 @@ static struct msm8916_icc_node *msm8916_snoc_nodes[] = { [SNOC_QDSS_INT] = &qdss_int, }; -static struct msm8916_icc_desc msm8916_snoc = { +static struct qcom_icc_desc msm8916_snoc = { .nodes = msm8916_snoc_nodes, .num_nodes =ARRAY_SIZE (msm8916_snoc_nodes), }; -static struct msm8916_icc_node *msm8916_bimc_nodes[] = { +static struct qcom_icc_node *msm8916_bimc_nodes[] = { [BIMC_SNOC_MAS ] = &bimc_snoc_mas, [MASTER_AMPSS_M0 ] = &mas_apss, [MASTER_GRAPHICS_3D ] = &mas_gfx,@@ -300,12 +242,12 @@ static struct msm8916_icc_node *msm8916_bimc_nodes[] = { [SNOC_BIMC_1_SLV] = &snoc_bimc_1_slv, }; -static struct msm8916_icc_desc msm8916_bimc = { +static struct qcom_icc_desc msm8916_bimc = { .nodes = msm8916_bimc_nodes, .num_nodes =ARRAY_SIZE (msm8916_bimc_nodes), }; -static struct msm8916_icc_node *msm8916_pcnoc_nodes[] = { +static struct qcom_icc_node *msm8916_pcnoc_nodes[] = { [MASTER_BLSP_1 ] = &mas_blsp_1, [MASTER_DEHR ] = &mas_dehr, [MASTER_LPASS ] = &mas_audio,@@ -358,178 +300,15 @@ static struct msm8916_icc_node *msm8916_pcnoc_nodes[] = { [SNOC_PCNOC_SLV] = &snoc_pcnoc_slv, }; -static struct msm8916_icc_desc msm8916_pcnoc = { +static struct qcom_icc_desc msm8916_pcnoc = { .nodes = msm8916_pcnoc_nodes, .num_nodes =ARRAY_SIZE (msm8916_pcnoc_nodes), }; -static int msm8916_icc_set (struct icc_node *src,struct icc_node *dst) -{ -struct msm8916_icc_provider *qp; -struct msm8916_icc_node *qn; -u64 sum_bw, max_peak_bw, rate; -u32 agg_avg =0 , agg_peak =0 ; -struct icc_provider *provider; -struct icc_node *n; -int ret, i; - - qn = src->data; - provider = src->provider; - qp =to_msm8916_provider (provider); - -list_for_each_entry (n, &provider->nodes, node_list) - provider->aggregate (n,0 , n->avg_bw, n->peak_bw, - &agg_avg, &agg_peak); - - sum_bw =icc_units_to_bps (agg_avg); - max_peak_bw =icc_units_to_bps (agg_peak); - -/* send bandwidth request message to the RPM processor */ -if (qn->mas_rpm_id !=-1 ) { - ret =qcom_icc_rpm_smd_send (QCOM_SMD_RPM_ACTIVE_STATE , -RPM_BUS_MASTER_REQ , - qn->mas_rpm_id, - sum_bw); -if (ret) { -pr_err ("qcom_icc_rpm_smd_send mas %d error %d\n" , - qn->mas_rpm_id, ret); -return ret; - } - } - -if (qn->slv_rpm_id !=-1 ) { - ret =qcom_icc_rpm_smd_send (QCOM_SMD_RPM_ACTIVE_STATE , -RPM_BUS_SLAVE_REQ , - qn->slv_rpm_id, - sum_bw); -if (ret) { -pr_err ("qcom_icc_rpm_smd_send slv error %d\n" , - ret); -return ret; - } - } - - rate =max (sum_bw, max_peak_bw); - -do_div (rate, qn->buswidth); - -if (qn->rate == rate) -return 0 ; - -for (i =0 ; i < qp->num_clks; i++) { - ret =clk_set_rate (qp->bus_clks[i].clk, rate); -if (ret) { -pr_err ("%s clk_set_rate error: %d\n" , - qp->bus_clks[i].id, ret); -return ret; - } - } - - qn->rate = rate; - -return 0 ; -} -static int msm8916_qnoc_probe (struct platform_device *pdev) { -const struct msm8916_icc_desc *desc; -struct msm8916_icc_node **qnodes; -struct msm8916_icc_provider *qp; -struct device *dev = &pdev->dev; -struct icc_onecell_data *data; -struct icc_provider *provider; -struct icc_node *node; -size_t num_nodes, i; -int ret; - -/* wait for the RPM proxy */ -if (!qcom_icc_rpm_smd_available ()) -return -EPROBE_DEFER ; - - desc =of_device_get_match_data (dev); -if (!desc) -return -EINVAL ; - - qnodes = desc->nodes; - num_nodes = desc->num_nodes; - - qp =devm_kzalloc (dev,sizeof (*qp),GFP_KERNEL ); -if (!qp) -return -ENOMEM ; - - data =devm_kzalloc (dev,struct_size (data, nodes, num_nodes), -GFP_KERNEL ); -if (!data) -return -ENOMEM ; - - qp->bus_clks =devm_kmemdup (dev, msm8916_bus_clocks, -sizeof (msm8916_bus_clocks),GFP_KERNEL ); -if (!qp->bus_clks) -return -ENOMEM ; - - qp->num_clks =ARRAY_SIZE (msm8916_bus_clocks); - ret =devm_clk_bulk_get (dev, qp->num_clks, qp->bus_clks); -if (ret) -return ret; - - ret =clk_bulk_prepare_enable (qp->num_clks, qp->bus_clks); -if (ret) -return ret; - - provider = &qp->provider; -INIT_LIST_HEAD (&provider->nodes); - provider->dev = dev; - provider->set = msm8916_icc_set; - provider->aggregate = icc_std_aggregate; - provider->xlate = of_icc_xlate_onecell; - provider->data = data; - - ret =icc_provider_add (provider); -if (ret) { -dev_err (dev,"error adding interconnect provider: %d\n" , ret); -clk_bulk_disable_unprepare (qp->num_clks, qp->bus_clks); -return ret; - } - -for (i =0 ; i < num_nodes; i++) { -size_t j; - - node =icc_node_create (qnodes[i]->id); -if (IS_ERR (node)) { - ret =PTR_ERR (node); - goto err; - } - - node->name = qnodes[i]->name; - node->data = qnodes[i]; -icc_node_add (node, provider); - -for (j =0 ; j < qnodes[i]->num_links; j++) -icc_link_create (node, qnodes[i]->links[j]); - - data->nodes[i] = node; - } - data->num_nodes = num_nodes; - -platform_set_drvdata (pdev, qp); - -return 0 ; - -err: -icc_nodes_remove (provider); -icc_provider_del (provider); -clk_bulk_disable_unprepare (qp->num_clks, qp->bus_clks); - -return ret; -} - -static int msm8916_qnoc_remove (struct platform_device *pdev) -{ -struct msm8916_icc_provider *qp =platform_get_drvdata (pdev); - -icc_nodes_remove (&qp->provider); -clk_bulk_disable_unprepare (qp->num_clks, qp->bus_clks); -return icc_provider_del (&qp->provider); +return qnoc_probe (pdev,sizeof (msm8916_bus_clocks), +ARRAY_SIZE (msm8916_bus_clocks), msm8916_bus_clocks); }static const struct of_device_id msm8916_noc_of_match[] = {@@ -542,7 +321,7 @@ MODULE_DEVICE_TABLE(of, msm8916_noc_of_match);static struct platform_driver msm8916_noc_driver = { .probe = msm8916_qnoc_probe, - .remove = msm8916_qnoc_remove, + .remove = qnoc_remove, .driver = { .name ="qnoc-msm8916" , .of_match_table = msm8916_noc_of_match,
Re: [PATCH v2 1/5] interconnect: qcom: Consolidate interconnect RPM support
AngeloGioacchino Del Regno <[email protected]>
Quoted 15 lines · 于2020年12月5日周六 上午2:04写道:
Il 04/12/20 08:53, Jun Nie ha scritto:
Quoted 7 lines
Add RPM based interconnect driver implements the set and aggregate functionalities that translates bandwidth requests into RPM messages. These modules provide a common set of functionalities for all Qualcomm RPM based interconnect providers and should help reduce code duplication when adding new providers.
Signed-off-by Jun Nie <[email protected]>Hello!
I agree, the RPM based ICC should be commonized... in any case, I think that you should rebase your patch series over mine, where I am adding support for SDM660 and also introducing a mechanism to set QoS, which can actually be used by most platforms managing the ICC over RPM.
Quoted 5 lines
Please, check it out: https://lore.kernel.org/patchwork/patch/1322131/
Thanks,
Angelo
Angelo,
Thanks for your contribution! It looks like a great new feature. But they are not
ready for other qnoc icc drivers yet. It should not be included in this commonization
patch set until someone add and test the feature for all qnoc drivers.
Regards,
Jun
PATCH v2 2/5 interconnect: qcom: qcs404: use shared code
In reply to Jun NieUse shared code for aggregate functionalities and probe function to remove duplicated code.
--- drivers/interconnect/qcom/qcs404.c | 242 +---------------------------- 1 file changed, 8 insertions(+), 234 deletions(-)
drivers/interconnect/qcom/qcs404.c +8 -234
@@ -9,15 +9,12 @@#include <linux/interconnect-provider.h> #include <linux/io.h> #include <linux/module.h> -#include <linux/of_device.h> -#include <linux/of_platform.h> #include <linux/platform_device.h> -#include <linux/slab.h> +#include <linux/of_device.h> -#include "smd-rpm.h" -#define RPM_BUS_MASTER_REQ 0x73616d62 -#define RPM_BUS_SLAVE_REQ 0x766c7362 +#include "smd-rpm.h" +#include "icc-rpm.h" enum {QCS404_MASTER_AMPSS_M0 =1 ,
@@ -95,67 +92,11 @@ enum { QCS404_SLAVE_LPASS, }; -#define to_qcom_provider (_provider) \ - container_of(_provider, struct qcom_icc_provider, provider) - -static const struct clk_bulk_data bus_clocks[] = { +static const struct clk_bulk_data qcs404_bus_clocks[] = { { .id ="bus" }, { .id ="bus_a" }, }; -/** -* struct qcom_icc_provider - Qualcomm specific interconnect provider -* @provider: generic interconnect provider -* @bus_clks: the clk_bulk_data table of bus clocks -* @num_clks: the total number of clk_bulk_data entries -*/ -struct qcom_icc_provider { -struct icc_provider provider; -struct clk_bulk_data *bus_clks; -int num_clks; -}; - -#define QCS404_MAX_LINKS 12 - -/** -* struct qcom_icc_node - Qualcomm specific interconnect nodes -* @name: the node name used in debugfs -* @id: a unique node identifier -* @links: an array of nodes where we can go next while traversing -* @num_links: the total number of @links -* @buswidth: width of the interconnect between a node and the bus (bytes) -* @mas_rpm_id: RPM id for devices that are bus masters -* @slv_rpm_id: RPM id for devices that are bus slaves -* @rate: current bus clock rate in Hz -*/ -struct qcom_icc_node { -unsigned char *name; -u16 id; -u16 links[QCS404_MAX_LINKS ]; -u16 num_links; -u16 buswidth; -int mas_rpm_id; -int slv_rpm_id; -u64 rate; -}; - -struct qcom_icc_desc { -struct qcom_icc_node **nodes; -size_t num_nodes; -}; - -#define DEFINE_QNODE (_name, _id, _buswidth, _mas_rpm_id, _slv_rpm_id, \ - ...) \ - static struct qcom_icc_node _name = { \ - .name = #_name, \ - .id = _id, \ - .buswidth = _buswidth, \ - .mas_rpm_id = _mas_rpm_id, \ - .slv_rpm_id = _slv_rpm_id, \ - .num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })), \ - .links = { __VA_ARGS__ }, \ - } -DEFINE_QNODE (mas_apps_proc,QCS404_MASTER_AMPSS_M0 ,8 ,0 ,-1 ,QCS404_SLAVE_EBI_CH0 ,QCS404_BIMC_SNOC_SLV );DEFINE_QNODE (mas_oxili,QCS404_MASTER_GRAPHICS_3D ,8 ,-1 ,-1 ,QCS404_SLAVE_EBI_CH0 ,QCS404_BIMC_SNOC_SLV );DEFINE_QNODE (mas_mdp,QCS404_MASTER_MDP_PORT0 ,8 ,-1 ,-1 ,QCS404_SLAVE_EBI_CH0 ,QCS404_BIMC_SNOC_SLV );
@@ -327,178 +268,11 @@ static struct qcom_icc_desc qcs404_snoc = { .num_nodes = ARRAY_SIZE(qcs404_snoc_nodes), }; -static int qcom_icc_set (struct icc_node *src,struct icc_node *dst) -{ -struct qcom_icc_provider *qp; -struct qcom_icc_node *qn; -struct icc_provider *provider; -struct icc_node *n; -u64 sum_bw; -u64 max_peak_bw; -u64 rate; -u32 agg_avg =0 ; -u32 agg_peak =0 ; -int ret, i; - - qn = src->data; - provider = src->provider; - qp =to_qcom_provider (provider); - -list_for_each_entry (n, &provider->nodes, node_list) - provider->aggregate (n,0 , n->avg_bw, n->peak_bw, - &agg_avg, &agg_peak); - - sum_bw =icc_units_to_bps (agg_avg); - max_peak_bw =icc_units_to_bps (agg_peak); - -/* send bandwidth request message to the RPM processor */ -if (qn->mas_rpm_id !=-1 ) { - ret =qcom_icc_rpm_smd_send (QCOM_SMD_RPM_ACTIVE_STATE , -RPM_BUS_MASTER_REQ , - qn->mas_rpm_id, - sum_bw); -if (ret) { -pr_err ("qcom_icc_rpm_smd_send mas %d error %d\n" , - qn->mas_rpm_id, ret); -return ret; - } - } - -if (qn->slv_rpm_id !=-1 ) { - ret =qcom_icc_rpm_smd_send (QCOM_SMD_RPM_ACTIVE_STATE , -RPM_BUS_SLAVE_REQ , - qn->slv_rpm_id, - sum_bw); -if (ret) { -pr_err ("qcom_icc_rpm_smd_send slv error %d\n" , - ret); -return ret; - } - } - - rate =max (sum_bw, max_peak_bw); - -do_div (rate, qn->buswidth); - -if (qn->rate == rate) -return 0 ; - -for (i =0 ; i < qp->num_clks; i++) { - ret =clk_set_rate (qp->bus_clks[i].clk, rate); -if (ret) { -pr_err ("%s clk_set_rate error: %d\n" , - qp->bus_clks[i].id, ret); -return ret; - } - } - - qn->rate = rate; -return 0 ; -} - -static int qnoc_probe (struct platform_device *pdev) +static int qcs404_qnoc_probe (struct platform_device *pdev) { -struct device *dev = &pdev->dev; -const struct qcom_icc_desc *desc; -struct icc_onecell_data *data; -struct icc_provider *provider; -struct qcom_icc_node **qnodes; -struct qcom_icc_provider *qp; -struct icc_node *node; -size_t num_nodes, i; -int ret; - -/* wait for the RPM proxy */ -if (!qcom_icc_rpm_smd_available ()) -return -EPROBE_DEFER ; - - desc =of_device_get_match_data (dev); -if (!desc) -return -EINVAL ; - - qnodes = desc->nodes; - num_nodes = desc->num_nodes; - - qp =devm_kzalloc (dev,sizeof (*qp),GFP_KERNEL ); -if (!qp) -return -ENOMEM ; - - data =devm_kzalloc (dev,struct_size (data, nodes, num_nodes), -GFP_KERNEL ); -if (!data) -return -ENOMEM ; - - qp->bus_clks =devm_kmemdup (dev, bus_clocks,sizeof (bus_clocks), -GFP_KERNEL ); -if (!qp->bus_clks) -return -ENOMEM ; - - qp->num_clks =ARRAY_SIZE (bus_clocks); - ret =devm_clk_bulk_get (dev, qp->num_clks, qp->bus_clks); -if (ret) -return ret; - - ret =clk_bulk_prepare_enable (qp->num_clks, qp->bus_clks); -if (ret) -return ret; - - provider = &qp->provider; -INIT_LIST_HEAD (&provider->nodes); - provider->dev = dev; - provider->set = qcom_icc_set; - provider->aggregate = icc_std_aggregate; - provider->xlate = of_icc_xlate_onecell; - provider->data = data; - - ret =icc_provider_add (provider); -if (ret) { -dev_err (dev,"error adding interconnect provider: %d\n" , ret); -clk_bulk_disable_unprepare (qp->num_clks, qp->bus_clks); -return ret; - } - -for (i =0 ; i < num_nodes; i++) { -size_t j; - - node =icc_node_create (qnodes[i]->id); -if (IS_ERR (node)) { - ret =PTR_ERR (node); - goto err; - } - - node->name = qnodes[i]->name; - node->data = qnodes[i]; -icc_node_add (node, provider); - -dev_dbg (dev,"registered node %s\n" , node->name); - -/* populate links */ -for (j =0 ; j < qnodes[i]->num_links; j++) -icc_link_create (node, qnodes[i]->links[j]); - - data->nodes[i] = node; - } - data->num_nodes = num_nodes; - -platform_set_drvdata (pdev, qp); - -return 0 ; -err: -icc_nodes_remove (provider); -clk_bulk_disable_unprepare (qp->num_clks, qp->bus_clks); -icc_provider_del (provider); - -return ret; -} - -static int qnoc_remove (struct platform_device *pdev) -{ -struct qcom_icc_provider *qp =platform_get_drvdata (pdev); - -icc_nodes_remove (&qp->provider); -clk_bulk_disable_unprepare (qp->num_clks, qp->bus_clks); -return icc_provider_del (&qp->provider); +return qnoc_probe (pdev,sizeof (qcs404_bus_clocks), +ARRAY_SIZE (qcs404_bus_clocks), qcs404_bus_clocks); }static const struct of_device_id qcs404_noc_of_match[] = {
@@ -510,7 +284,7 @@ static const struct of_device_id qcs404_noc_of_match[] = {MODULE_DEVICE_TABLE (of, qcs404_noc_of_match);static struct platform_driver qcs404_noc_driver = { - .probe = qnoc_probe, + .probe = qcs404_qnoc_probe, .remove = qnoc_remove, .driver = { .name ="qnoc-qcs404" ,
Signature · 1 line
2.17.1
PATCH v2 3/5 dt-bindings: interconnect: single yaml file for RPM interconnect drivers
In reply to Jun NieMSM8916 and QCS404 bindings are almost identical, so combine them into one. This will make it easier to add interconnect bindings for more SoC with RPM.
---
.../bindings/interconnect/qcom,qcs404.yaml | 77 -------------------
.../{qcom,msm8916.yaml => qcom,rpm.yaml} | 18 +++--
2 files changed, 11 insertions(+), 84 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml
rename Documentation/devicetree/bindings/interconnect/{qcom,msm8916.yaml => qcom,rpm.yaml} (81%)Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml deleted +0 -77
@@ -1,77 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/interconnect/qcom,qcs404.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm QCS404 Network-On-Chip interconnect - -maintainers: - - Georgi Djakov <[email protected]> - -description: | - The Qualcomm QCS404 interconnect providers support adjusting the - bandwidth requirements between the various NoC fabrics. - -properties: - reg: - maxItems: 1 - - compatible: - enum: - - qcom,qcs404-bimc - - qcom,qcs404-pcnoc - - qcom,qcs404-snoc - - '#interconnect-cells': - const: 1 - - clock-names: - items: - - const: bus - - const: bus_a - - clocks: - items: - - description: Bus Clock - - description: Bus A Clock - -required: - - compatible - - reg - - '#interconnect-cells' - - clock-names - - clocks - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,rpmcc.h> - - bimc: interconnect@400000 { - reg = <0x00400000 0x80000>; - compatible = "qcom,qcs404-bimc"; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_BIMC_CLK>, - <&rpmcc RPM_SMD_BIMC_A_CLK>; - }; - - pnoc: interconnect@500000 { - reg = <0x00500000 0x15080>; - compatible = "qcom,qcs404-pcnoc"; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_PNOC_CLK>, - <&rpmcc RPM_SMD_PNOC_A_CLK>; - }; - - snoc: interconnect@580000 { - reg = <0x00580000 0x23080>; - compatible = "qcom,qcs404-snoc"; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_SNOC_CLK>, - <&rpmcc RPM_SMD_SNOC_A_CLK>; - };
Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml renamed from Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml +11 -7
@@ -1,27 +1,31 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/interconnect/qcom,msm8916.yaml# +$id: http://devicetree.org/schemas/interconnect/qcom,rpm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm MSM8916 Network-On-Chip interconnect +title: Qualcomm RPM Network-On-Chip Interconnect maintainers: - Georgi Djakov <[email protected]> description: | - The Qualcomm MSM8916 interconnect providers support adjusting the - bandwidth requirements between the various NoC fabrics. + RPM interconnect providers support system bandwidth requirements through + RPM processor. The provider is able to communicate with the RPM through + the RPM shared memory device. properties: + reg: + maxItems: 1 + compatible: enum: - qcom,msm8916-bimc - qcom,msm8916-pcnoc - qcom,msm8916-snoc - - reg: - maxItems: 1 + - qcom,qcs404-bimc + - qcom,qcs404-pcnoc + - qcom,qcs404-snoc '#interconnect-cells': const: 1
Signature · 1 line
2.17.1
PATCH v2 4/5 dt-bindings: interconnect: Add Qualcomm MSM8939 DT bindings
In reply to Jun NieThe Qualcomm MSM8939 platform has several bus fabrics that could be controlled and tuned dynamically according to the bandwidth demand.
--- .../bindings/interconnect/qcom,rpm.yaml | 4 + .../dt-bindings/interconnect/qcom,msm8939.h | 105 ++++++++++++++++++ 2 files changed, 109 insertions(+) create mode 100644 include/dt-bindings/interconnect/qcom,msm8939.h
Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml +4 -0
@@ -23,6 +23,10 @@ properties: - qcom,msm8916-bimc - qcom,msm8916-pcnoc - qcom,msm8916-snoc + - qcom,msm8939-bimc + - qcom,msm8939-pcnoc + - qcom,msm8939-snoc + - qcom,msm8939-snoc-mm - qcom,qcs404-bimc - qcom,qcs404-pcnoc - qcom,qcs404-snoc
include/dt-bindings/interconnect/qcom,msm8939.h new file +105 -0
105 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH v2 5/5 interconnect: qcom: Add MSM8939 interconnect provider driver
In reply to Jun NieAdd driver for the Qualcomm interconnect buses found in MSM8939 based platforms. The topology consists of four NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs.
--- drivers/interconnect/qcom/Kconfig | 9 + drivers/interconnect/qcom/Makefile | 2 + drivers/interconnect/qcom/msm8939.c | 355 ++++++++++++++++++++++++++++ 3 files changed, 366 insertions(+) create mode 100644 drivers/interconnect/qcom/msm8939.c
drivers/interconnect/qcom/Kconfig +9 -0
@@ -17,6 +17,15 @@ config INTERCONNECT_QCOM_MSM8916 This is a driver for the Qualcomm Network-on-Chip on msm8916-based platforms. +config INTERCONNECT_QCOM_MSM8939 + tristate "Qualcomm MSM8939 interconnect driver" + depends on INTERCONNECT_QCOM + depends on QCOM_SMD_RPM + select INTERCONNECT_QCOM_SMD_RPM + help + This is a driver for the Qualcomm Network-on-Chip on msm8939-based + platforms. + config INTERCONNECT_QCOM_MSM8974 tristate "Qualcomm MSM8974 interconnect driver" depends on INTERCONNECT_QCOM
drivers/interconnect/qcom/Makefile +2 -0
@@ -2,6 +2,7 @@ icc-bcm-voter-objs := bcm-voter.o qnoc-msm8916-objs := msm8916.o +qnoc-msm8939-objs := msm8939.o qnoc-msm8974-objs := msm8974.o icc-osm-l3-objs := osm-l3.o qnoc-qcs404-objs := qcs404.o
@@ -14,6 +15,7 @@ icc-smd-rpm-objs := smd-rpm.o icc-rpm.o obj-$(CONFIG_INTERCONNECT_QCOM_BCM_VOTER) += icc-bcm-voter.o obj-$(CONFIG_INTERCONNECT_QCOM_MSM8916) += qnoc-msm8916.o +obj-$(CONFIG_INTERCONNECT_QCOM_MSM8939) += qnoc-msm8939.o obj-$(CONFIG_INTERCONNECT_QCOM_MSM8974) += qnoc-msm8974.o obj-$(CONFIG_INTERCONNECT_QCOM_OSM_L3) += icc-osm-l3.o obj-$(CONFIG_INTERCONNECT_QCOM_QCS404) += qnoc-qcs404.o
drivers/interconnect/qcom/msm8939.c new file +355 -0
355 lines not on this page · raw message
Signature · 1 line
2.17.1
Re: [PATCH v2 5/5] interconnect: qcom: Add MSM8939 interconnect provider driver
Le vendredi 04 décembre 2020 à 15:53 +0800, Jun Nie a écrit :
Quoted 6 lines
Add driver for the Qualcomm interconnect buses found in MSM8939 based platforms. The topology consists of four NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs.
Signed-off-by Jun Nie <[email protected]>
Shouldn't some rpm ids be changed like they were for msm8916 in the following patch ? c497f9322af9 ("interconnect: qcom: msm8916: Remove rpm-ids from non-RPM nodes")
https://patchwork.kernel.org/project/linux-arm-msm/patch/[email protected]/
Re: [PATCH v2 5/5] interconnect: qcom: Add MSM8939 interconnect provider driver
Quoted 11 lines · Vincent Knecht
Le vendredi 04 décembre 2020 à 15:53 +0800, Jun Nie a écrit :
Quoted 6 lines
Add driver for the Qualcomm interconnect buses found in MSM8939 based platforms. The topology consists of four NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs.
Signed-off-by Jun Nie <[email protected]>Shouldn't some rpm ids be changed like they were for msm8916 in the following patch ?
c497f9322af9("interconnect: qcom: msm8916: Remove rpm-ids from non-RPM nodes")
https://patchwork.kernel.org/project/linux-arm-msm/patch/[email protected]/
Maybe they should. I don't have the hardware to try it, but the test will be to just add the NoC DT nodes, enable the driver and inspect the boot log for messages like:
[ 2.926647] qcom_icc_rpm_smd_send mas X error -6
Thanks,
Georgi
Re: [PATCH v2 5/5] interconnect: qcom: Add MSM8939 interconnect provider driver
Quoted 13 lines · Georgi Djakov
Quoted 11 lines · Vincent Knecht
Le vendredi 04 décembre 2020 à 15:53 +0800, Jun Nie a écrit :
Quoted 6 lines
Add driver for the Qualcomm interconnect buses found in MSM8939 based platforms. The topology consists of four NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs.
Signed-off-by Jun Nie <[email protected]>Shouldn't some rpm ids be changed like they were for msm8916 in the following patch ?
c497f9322af9("interconnect: qcom: msm8916: Remove rpm-ids from non-RPM nodes")
https://patchwork.kernel.org/project/linux-arm-msm/patch/[email protected]/
Quoted 7 lines
Maybe they should. I don't have the hardware to try it, but the test will be to just add the NoC DT nodes, enable the driver and inspect the boot log for messages like:
[ 2.926647]qcom_icc_rpm_smd_sendmas X error -6Thanks,
Georgi
Hi Vincent & Georgi,
Thanks, I ran your suggestion on an MSM8939 board (with an additional change to print slave IDs as well). Results:
[ 1.901376] qcom_icc_rpm_smd_send slv 24 error -6 [ 2.005977] qcom_icc_rpm_smd_send mas 20 error -6 [ 2.010250] qcom_icc_rpm_smd_send slv 20 error -6 [ 2.014684] qcom_icc_rpm_smd_send slv 106 error -6 [ 2.019338] qcom_icc_rpm_smd_send slv 107 error -6 [ 2.024615] qcom_icc_rpm_smd_send slv 29 error -6 [ 2.028782] qcom_icc_rpm_smd_send mas 3 error -6 [ 2.034657] qcom_icc_rpm_smd_send mas 100 error -6
(and there's another slv 131 that's hidden by the mas 100 failure)
Jun, I'll send you the patch I tested with to silence all these errors, if you want to just squash that into the next version of your patchset.
Ben
Re: [PATCH v2 5/5] interconnect: qcom: Add MSM8939 interconnect provider driver
Hi Ben,
Quoted 35 lines · Benjamin Li
Quoted 13 lines · Georgi Djakov
Quoted 11 lines · Vincent Knecht
Le vendredi 04 décembre 2020 à 15:53 +0800, Jun Nie a écrit :
Quoted 6 lines
Add driver for the Qualcomm interconnect buses found in MSM8939 based platforms. The topology consists of four NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs.
Signed-off-by Jun Nie <[email protected]>Shouldn't some rpm ids be changed like they were for msm8916 in the following patch ?
c497f9322af9("interconnect: qcom: msm8916: Remove rpm-ids from non-RPM nodes")
https://patchwork.kernel.org/project/linux-arm-msm/patch/[email protected]/Quoted 7 lines
Maybe they should. I don't have the hardware to try it, but the test will be to just add the NoC DT nodes, enable the driver and inspect the boot log for messages like:
[ 2.926647]qcom_icc_rpm_smd_sendmas X error -6Thanks,
GeorgiHi Vincent & Georgi,
Thanks, I ran your suggestion on an MSM8939 board (with an additional change to print slave IDs as well). Results:
[ 1.901376] qcom_icc_rpm_smd_send slv 24 error -6 [ 2.005977] qcom_icc_rpm_smd_send mas 20 error -6 [ 2.010250] qcom_icc_rpm_smd_send slv 20 error -6 [ 2.014684] qcom_icc_rpm_smd_send slv 106 error -6 [ 2.019338] qcom_icc_rpm_smd_send slv 107 error -6 [ 2.024615] qcom_icc_rpm_smd_send slv 29 error -6 [ 2.028782] qcom_icc_rpm_smd_send mas 3 error -6 [ 2.034657] qcom_icc_rpm_smd_send mas 100 error -6
Quoted 4 lines
(and there's another slv 131 that's hidden by the mas 100 failure)
Jun, I'll send you the patch I tested with to silence all these errors, if you want to just squash that into the next version of your patchset.
Thank you for doing this! Please send a follow-up patch as i already queued Jun's patches.
Thanks,
Georgi
This series was applied to qcom/linux.git (refs/heads/for-next):
Hello:
This series was applied to qcom/linux.git (refs/heads/for-next):
Quoted 9 lines · On Fri, 4 Dec 2020 15:53:40 +0800 you wrote:
This patch set split shared RPM based interconnect operation code and add support to MSM8939 interconnect.
Changes vs V1:
- Rebase to latest icc code.
- Remove unnecessary comment and info.
- Fix some format issues.[...]
Here is the summary with links:
- [v2,1/5] interconnect: qcom: Consolidate interconnect RPM support
https://git.kernel.org/qcom/c/62feb14ee8a3 - [v2,2/5] interconnect: qcom: qcs404: use shared code https://git.kernel.org/qcom/c/dfbd988f1ce6 - [v2,3/5] dt-bindings: interconnect: single yaml file for RPM interconnect drivers https://git.kernel.org/qcom/c/4187f9c16b7d - [v2,4/5] dt-bindings: interconnect: Add Qualcomm MSM8939 DT bindings https://git.kernel.org/qcom/c/4ec908d21040 - [v2,5/5] interconnect: qcom: Add MSM8939 interconnect provider driver https://git.kernel.org/qcom/c/6c6fe5d3dc5e
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html