ide-scsi and SMP does not work together.
Hello Support Center :-)
Since I have 2 CPUs on my mainboard and compiled the SMP-support in, I cannot use ide-scsi anymore. I guess it must have something to do with apic, because when I use "Local APIC support on uniprocessors", I have the same problem. With no SMP and no local APIC everything works fine. (except the second CPU, of course). Normal ide-cdrom support works, but recording CDs over atapi is not really what I want at the moment.
Mainboard: MSI 694D pro
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 10)
Linux 2.4.22
Nov 5 00:09:28 DualPrinzip kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Nov 5 00:11:05 DualPrinzip kernel: hda: packet command error: status=0x51 { DriveReady SeekComplete Error }
Nov 5 00:11:05 DualPrinzip kernel: hda: packet command error: error=0x54
Nov 5 00:11:05 DualPrinzip kernel: ATAPI device hda:
Nov 5 00:11:05 DualPrinzip kernel: Error: Illegal request -- (Sense key=0x05)
Nov 5 00:11:05 DualPrinzip kernel: Invalid field in command packet -- (asc=0x24, ascq=0x00)
Nov 5 00:11:05 DualPrinzip kernel: The failed "Mode Sense 10" packet command was:
Nov 5 00:11:05 DualPrinzip kernel: "5a 00 30 00 00 00 00 00 02 00 00 00 "
Nov 5 00:11:05 DualPrinzip kernel: hda: packet command error: status=0x51 { DriveReady SeekComplete Error }
Nov 5 00:11:05 DualPrinzip kernel: hda: packet command error: error=0x54
Nov 5 00:11:05 DualPrinzip kernel: ATAPI device hda:
Nov 5 00:11:05 DualPrinzip kernel: Error: Illegal request -- (Sense key=0x05)
Nov 5 00:11:05 DualPrinzip kernel: Invalid field in command packet -- (asc=0x24, ascq=0x00)
Nov 5 00:11:05 DualPrinzip kernel: The failed "Mode Sense 10" packet command was:
Nov 5 00:11:05 DualPrinzip kernel: "5a 00 30 00 00 00 00 00 08 00 00 00 "Best regards
Klaus
--
Klaus Umbach <[email protected]>
Quoted 9 lines · Klaus Umbach
Hello Support Center :-)
Since I have 2 CPUs on my mainboard and compiled the SMP-support in, I cannot use ide-scsi anymore. I guess it must have something to do with apic, because when I use "Local APIC support on uniprocessors", I have the same problem. With no SMP and no local APIC everything works fine. (except the second CPU, of course). Normal ide-cdrom support works, but recording CDs over atapi is not really what I want at the moment.
Quoted 3 lines
Mainboard: MSI 694D pro
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 10)
SMP by default uses the I/O-APIC, and may (depending on kernel version and .config) also use ACPI, which in turn may trigger ACPI-controlled PCI IRQ routing.
Try "acpi=off", "pci=noacpi" (or however that don't-use-ACPI-for-PCI option is spelled), and "noapic" (don't use I/O-APIC).
/Mikael
Quoted 12 lines · Mikael Pettersson
Quoted 11 lines · Klaus Umbach
Hello Support Center :-)
Since I have 2 CPUs on my mainboard and compiled the SMP-support in, I cannot use ide-scsi anymore. I guess it must have something to do with apic, because when I use "Local APIC support on uniprocessors", I have the same problem. With no SMP and no local APIC everything works fine. (except the second CPU, of course). Normal ide-cdrom support works, but recording CDs over atapi is not really what I want at the moment.
Mainboard: MSI 694D pro
Quoted 8 lines
Quoted 1 line
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 10)
SMP by default uses the I/O-APIC, and may (depending on kernel version and .config) also use ACPI, which in turn may trigger ACPI-controlled PCI IRQ routing.
Try "acpi=off", "pci=noacpi" (or however that don't-use-ACPI-for-PCI option is spelled), and "noapic" (don't use I/O-APIC).
No, that didn't work. I got the same error-messages. :-(
Quoted 3 lines
/Mikael
Klaus
--
Klaus Umbach <[email protected]>