Skip to contentSkip to conversation

ide-scsi and SMP does not work together.

DISCUSSION Klaus Umbach 2 participants 3 messages Nov 5, 2003 – Nov 14, 2003

lore
Share & tools
lore
#0 lore raw

Hello Support Center :-)

Since I have 2 CPUs on my mainboard and compiled the SMP-support in, I cannot use ide-scsi anymore. I guess it must have something to do with apic, because when I use "Local APIC support on uniprocessors", I have the same problem. With no SMP and no local APIC everything works fine. (except the second CPU, of course). Normal ide-cdrom support works, but recording CDs over atapi is not really what I want at the moment.

Mainboard: MSI 694D pro

00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 10)

Linux 2.4.22

Nov  5 00:09:28 DualPrinzip kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Nov  5 00:11:05 DualPrinzip kernel: hda: packet command error: status=0x51 { DriveReady SeekComplete Error }
Nov  5 00:11:05 DualPrinzip kernel: hda: packet command error: error=0x54
Nov  5 00:11:05 DualPrinzip kernel: ATAPI device hda:
Nov  5 00:11:05 DualPrinzip kernel:   Error: Illegal request -- (Sense key=0x05)
Nov  5 00:11:05 DualPrinzip kernel:   Invalid field in command packet -- (asc=0x24, ascq=0x00)
Nov  5 00:11:05 DualPrinzip kernel:   The failed "Mode Sense 10" packet command was: 
Nov  5 00:11:05 DualPrinzip kernel:   "5a 00 30 00 00 00 00 00 02 00 00 00 "
Nov  5 00:11:05 DualPrinzip kernel: hda: packet command error: status=0x51 { DriveReady SeekComplete Error }
Nov  5 00:11:05 DualPrinzip kernel: hda: packet command error: error=0x54
Nov  5 00:11:05 DualPrinzip kernel: ATAPI device hda:
Nov  5 00:11:05 DualPrinzip kernel:   Error: Illegal request -- (Sense key=0x05)
Nov  5 00:11:05 DualPrinzip kernel:   Invalid field in command packet -- (asc=0x24, ascq=0x00)
Nov  5 00:11:05 DualPrinzip kernel:   The failed "Mode Sense 10" packet command was: 
Nov  5 00:11:05 DualPrinzip kernel:   "5a 00 30 00 00 00 00 00 08 00 00 00 "

Best regards
Klaus

--
Klaus Umbach <[email protected]>

#1 lore raw
Quoted 9 lines · Klaus Umbach

Hello Support Center :-)

Since I have 2 CPUs on my mainboard and compiled the SMP-support in, I cannot use ide-scsi anymore. I guess it must have something to do with apic, because when I use "Local APIC support on uniprocessors", I have the same problem. With no SMP and no local APIC everything works fine. (except the second CPU, of course). Normal ide-cdrom support works, but recording CDs over atapi is not really what I want at the moment.

Quoted 3 lines

Mainboard: MSI 694D pro

00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 10)

SMP by default uses the I/O-APIC, and may (depending on kernel version and .config) also use ACPI, which in turn may trigger ACPI-controlled PCI IRQ routing.

Try "acpi=off", "pci=noacpi" (or however that don't-use-ACPI-for-PCI option is spelled), and "noapic" (don't use I/O-APIC).

/Mikael

#2 lore raw
Quoted 12 lines · Mikael Pettersson
Quoted 11 lines · Klaus Umbach

Hello Support Center :-)

Since I have 2 CPUs on my mainboard and compiled the SMP-support in, I cannot use ide-scsi anymore. I guess it must have something to do with apic, because when I use "Local APIC support on uniprocessors", I have the same problem. With no SMP and no local APIC everything works fine. (except the second CPU, of course). Normal ide-cdrom support works, but recording CDs over atapi is not really what I want at the moment.

Mainboard: MSI 694D pro

Quoted 8 lines
Quoted 1 line

00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 10)

SMP by default uses the I/O-APIC, and may (depending on kernel version and .config) also use ACPI, which in turn may trigger ACPI-controlled PCI IRQ routing.

Try "acpi=off", "pci=noacpi" (or however that don't-use-ACPI-for-PCI option is spelled), and "noapic" (don't use I/O-APIC).

No, that didn't work. I got the same error-messages. :-(

Quoted 3 lines

/Mikael

Klaus

--
Klaus Umbach <[email protected]>