arm64: dts: qcom: sc7280: fix display port phy reg property
Subsystems (4)
PATCH v2 1/1 arm64: dts: qcom: sc7280: fix display port phy reg property
Existing display port phy reg property is derived from usb phy which map display port phy pcs to wrong address which cause aux init with wrong address and prevent both dpcd read and write from working. Fix this problem by assigning correct pcs address to display port phy reg property.
Changes in V2:
-- rewording the commit text
--- arch/arm64/boot/dts/qcom/sc7280.dtsi | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
arch/arm64/boot/dts/qcom/sc7280.dtsi +2 -6
@@ -2881,15 +2881,11 @@ dp_phy: dp-phy@88ea200 { reg = <0 0x088ea200 0 0x200>, <0 0x088ea400 0 0x200>, - <0 0x088eac00 0 0x400>, + <0 0x088eaa00 0 0x200>, <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>, - <0 0x088eaa00 0 0x100>; + <0 0x088ea800 0 0x200>; #phy-cells = <0>; #clock-cells = <1>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; }; };
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Quoting Kuogee Hsieh (2021-09-09 12:49:58)
Quoted 8 lines
Existing display port phy reg property is derived from usb phy which map display port phy pcs to wrong address which cause aux init with wrong address and prevent both dpcd read and write from working. Fix this problem by assigning correct pcs address to display port phy reg property.
Changes in V2:
-- rewording the commit text
This Changes part can be put under the triple dash. This isn't drm tree material.
Quoted 4 lines
Fixes 9886e8fd8438 ("arm64: dts: qcom: sc7280: Add USB related nodes")Signed-off-by Kuogee Hsieh <[email protected]>---