Skip to contentSkip to conversation

Add Vol+ support for sc7280-idp

PATCH Superseded Satya Priya 2 participants 4 messages Sep 14, 2021

Subsystems (8)

v4 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v4 cover Add Vol+ support for sc7280-idp

David Collins (1):
pinctrl: qcom: spmi-gpio: correct parent irqspec translation

satya priya (1):
arm64: dts: sc7280: Add volume up support for sc7280-idp

 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 31 ++++++++++++++++++++++++++
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 37 +++++++++++++++++++++++++++++---
 2 files changed, 65 insertions(+), 3 deletions(-)
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation
#1 lore raw

PATCH v4 1/2 pinctrl: qcom: spmi-gpio: correct parent irqspec translation

From: David Collins <[email protected]>

pmic_gpio_child_to_parent_hwirq() and gpiochip_populate_parent_fwspec_fourcell() translate a pinctrl- spmi-gpio irqspec to an SPMI controller irqspec. When they do this, they use a fixed SPMI slave ID of 0 and a fixed GPIO peripheral offset of 0xC0 (corresponding to SPMI address 0xC000). This translation results in an incorrect irqspec for secondary PMICs that don't have a slave ID of 0 as well as for PMIC chips which have GPIO peripherals located at a base address other than 0xC000.

Correct this issue by passing the slave ID of the pinctrl-spmi- gpio device's parent in the SPMI controller irqspec and by calculating the peripheral ID base from the device tree 'reg' property of the pinctrl-spmi-gpio device.

Fixes ca69e2d165eb ("qcom: spmi-gpio: add support for hierarchical IRQ chip")

---
Changes in V2:
- Added a fixes tag.

Changes in V3:
- Removed "fwspec->param[2] = 0" from pmic_gpio_populate_parent_fwspec, as it is already set to zero, and must be left that way.

Changes in V4:
- No changes.

 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 37 +++++++++++++++++++++++++++++---
 1 file changed, 34 insertions(+), 3 deletions(-)
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +34 -3
index 98bf0e2..b2562e8 100644
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2012-2014, 2016-2021 The Linux Foundation. All rights reserved.
  */
 
 #include <linux/gpio/driver.h>
@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
+#include <linux/spmi.h>
 #include <linux/types.h>
 
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -171,6 +172,8 @@ struct pmic_gpio_state {
 	struct pinctrl_dev *ctrl;
 	struct gpio_chip chip;
 	struct irq_chip irq;
+	u8 usid;
+	u8 pid_base;
 };
 
 static const struct pinconf_generic_params pmic_gpio_bindings[] = {
@@ -949,12 +952,36 @@ static int pmic_gpio_child_to_parent_hwirq(struct gpio_chip *chip,
 					   unsigned int *parent_hwirq,
 					   unsigned int *parent_type)
 {
-	*parent_hwirq = child_hwirq + 0xc0;
+	struct pmic_gpio_state *state = gpiochip_get_data(chip);
+
+	*parent_hwirq = child_hwirq + state->pid_base;
 	*parent_type = child_type;
 
 	return 0;
 }
 
+static void *pmic_gpio_populate_parent_fwspec(struct gpio_chip *chip,
+					     unsigned int parent_hwirq,
+					     unsigned int parent_type)
+{
+	struct pmic_gpio_state *state = gpiochip_get_data(chip);
+	struct irq_fwspec *fwspec;
+
+	fwspec = kzalloc(sizeof(*fwspec), GFP_KERNEL);
+	if (!fwspec)
+		return NULL;
+
+	fwspec->fwnode = chip->irq.parent_domain->fwnode;
+
+	fwspec->param_count = 4;
+	fwspec->param[0] = state->usid;
+	fwspec->param[1] = parent_hwirq;
+	/* param[2] must be left as 0 */
+	fwspec->param[3] = parent_type;
+
+	return fwspec;
+}
+
 static int pmic_gpio_probe(struct platform_device *pdev)
 {
 	struct irq_domain *parent_domain;
@@ -965,6 +992,7 @@ static int pmic_gpio_probe(struct platform_device *pdev)
 	struct pmic_gpio_pad *pad, *pads;
 	struct pmic_gpio_state *state;
 	struct gpio_irq_chip *girq;
+	const struct spmi_device *parent_spmi_dev;
 	int ret, npins, i;
 	u32 reg;
 
@@ -984,6 +1012,9 @@ static int pmic_gpio_probe(struct platform_device *pdev)
 
 	state->dev = &pdev->dev;
 	state->map = dev_get_regmap(dev->parent, NULL);
+	parent_spmi_dev = to_spmi_device(dev->parent);
+	state->usid = parent_spmi_dev->usid;
+	state->pid_base = reg >> 8;
 
 	pindesc = devm_kcalloc(dev, npins, sizeof(*pindesc), GFP_KERNEL);
 	if (!pindesc)
@@ -1059,7 +1090,7 @@ static int pmic_gpio_probe(struct platform_device *pdev)
 	girq->fwnode = of_node_to_fwnode(state->dev->of_node);
 	girq->parent_domain = parent_domain;
 	girq->child_to_parent_hwirq = pmic_gpio_child_to_parent_hwirq;
-	girq->populate_parent_alloc_arg = gpiochip_populate_parent_fwspec_fourcell;
+	girq->populate_parent_alloc_arg = pmic_gpio_populate_parent_fwspec;
 	girq->child_offset_to_irq = pmic_gpio_child_offset_to_irq;
 	girq->child_irq_domain_ops.translate = pmic_gpio_domain_translate;
 
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation
#2 lore raw

PATCH v4 2/2 arm64: dts: sc7280: Add volume up support for sc7280-idp

In reply to Satya Priya

From: satya priya <[email protected]>

Add pm7325 PMIC gpio support for vol+ on sc7280-idp.

---
Changes in V2:
- No changes.

Changes in V3:
- Sorted the nodes alphabetically.

Changes in V4:
- Updated the node names to replace underscores with hipens

 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +31 -0
index 371a2a9..003112f 100644
@@ -239,6 +239,26 @@
 	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
 };
 
+&soc {
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_vol_up_default>;
+
+		volume-up {
+			label = "volume_up";
+			gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			gpio-key,wakeup;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+	};
+};
+
 &uart5 {
 	status = "okay";
 };
@@ -284,6 +304,17 @@
 
 /* PINCTRL - additions to nodes defined in sc7280.dtsi */
 
+&pm7325_gpios {
+	key_vol_up_default: key-vol-up-default {
+		pins = "gpio6";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		power-source = <0>;
+		qcom,drive-strength = <3>;
+	};
+};
+
 &qup_uart5_default {
 	tx {
 		pins = "gpio46";
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation
#3 lore raw

Re: [PATCH V4 2/2] arm64: dts: sc7280: Add volume up support for sc7280-idp

Quoting Satya Priya (2021-09-14 05:55:08)

arch/arm64/boot/dts/qcom/sc7280-idp.dtsi line 243

Quoted 10 lines
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +2 -0
index 371a2a9..003112f 100644
@@ -239,6 +239,26 @@
        cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
 };
 
+&soc {
+       gpio-keys {

This should be in the root node, not soc node as it doesn't have any reg property. Please move it to / and put it at the top of the file.

Quoted 21 lines
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +18 -0
+               compatible = "gpio-keys";
+               label = "gpio-keys";
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&key_vol_up_default>;
+
+               volume-up {
+                       label = "volume_up";
+                       gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
+                       linux,input-type = <1>;
+                       linux,code = <KEY_VOLUMEUP>;
+                       gpio-key,wakeup;
+                       debounce-interval = <15>;
+                       linux,can-disable;
+               };
+       };
+};
+
 &uart5 {
        status = "okay";
 };