Update the Icicle Kit device tree

similarity index 82%
rename from Documentation/devicetree/bindings/mailbox/microchip,polarfire-soc-mailbox.yaml
rename to Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml
index bbb173ea483c..9251c2218c68 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mailbox/microchip,polarfire-soc-mailbox.yaml#"
+$id: "http://devicetree.org/schemas/mailbox/microchip,mpfs-mailbox.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) mailbox controller

@@ -11,7 +11,7 @@ maintainers:
 
 properties:
   compatible:
-    const: microchip,polarfire-soc-mailbox
+    const: microchip,mpfs-mailbox
 
   reg:
     items:

@@ -38,7 +38,7 @@ examples:
       #address-cells = <2>;
       #size-cells = <2>;
       mbox: mailbox@37020000 {
-        compatible = "microchip,polarfire-soc-mailbox";
+        compatible = "mpfs-mailbox";
         reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318c 0x0 0x40>;
         interrupt-parent = <&L1>;
         interrupts = <96>;

similarity index 75%
rename from Documentation/devicetree/bindings/soc/microchip/microchip,polarfire-soc-sys-controller.yaml
rename to Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml
index 2cd3bc6bd8d6..f699772fedf3 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/soc/microchip/microchip,polarfire-soc-sys-controller.yaml#"
+$id: "http://devicetree.org/schemas/soc/microchip/microchip,mpfs-sys-controller.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) system controller

@@ -19,7 +19,7 @@ properties:
     maxItems: 1
 
   compatible:
-    const: microchip,polarfire-soc-sys-controller
+    const: microchip,mpfs-sys-controller
 
 required:
   - compatible

@@ -30,6 +30,6 @@ additionalProperties: false
 examples:
   - |
     syscontroller: syscontroller {
-      compatible = "microchip,polarfire-soc-sys-controller";
+      compatible = "microchip,mpfs-sys-controller";
       mboxes = <&mbox 0>;
     };

index f699772fedf3..b69386b1a3e1 100644
@@ -13,13 +13,45 @@ description: |
   The PolarFire SoC system controller is communicated with via a mailbox.
   This document describes the bindings for the client portion of that mailbox.
 
-
 properties:
   mboxes:
     maxItems: 1
 
   compatible:
-    const: microchip,mpfs-sys-controller
+    items:
+      - const: microchip,mpfs-sys-controller
+
+  rng:
+    type: object
+
+    description: |
+      The hardware random number generator on the Polarfire SoC is
+      accessed via the mailbox interface provided by the system controller
+
+    properties:
+      compatible:
+        const: microchip,mpfs-rng
+
+    required:
+      - compatible
+
+  sysserv:
+    type: object
+
+    description: |
+      The PolarFire SoC system controller is communicated with via a mailbox.
+      This binding represents several of the functions provided by the system
+      controller which do not belong in a specific subsystem, such as reading
+      the fpga device certificate, all of which follow the same format:
+        - a command + optional payload sent to the sys controller
+        - a status + a payload returned to Linux
+
+    properties:
+      compatible:
+        const: microchip,mpfs-generic-service
+
+    required:
+      - compatible
 
 required:
   - compatible

@@ -29,7 +61,13 @@ additionalProperties: false
 
 examples:
   - |
-    syscontroller: syscontroller {
+    syscontroller {
       compatible = "microchip,mpfs-sys-controller";
       mboxes = <&mbox 0>;
+      rng: rng {
+        compatible = "microchip,mpfs-rng";
+      };
+      sysserv: sysserv {
+        compatible = "microchip,mpfs-generic-service";
+      };
     };

new file mode 100644
index 000000000000..ced843e78844
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/microchip,mpfs-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MPFS I2C Controller Device Tree Bindings
+
+maintainers:
+  - Daire McNamara <[email protected]>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - microchip,mpfs-i2c # Microchip PolarFire SoC compatible SoCs
+      - microchip,corei2c-rtl-v7 # Microchip Fabric based i2c IP core
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: |
+      Desired I2C bus clock frequency in Hz. As only Standard and Fast
+      modes are supported, possible values are 100000 and 400000.
+    enum: [100000, 400000]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/microchip,mpfs-clock.h>
+    i2c@2010a000 {
+      compatible = "microchip,mpfs-i2c";
+      reg = <0x2010a000 0x1000>;
+      clocks = <&clkcfg CLK_I2C0>;
+      interrupt-parent = <&plic>;
+      interrupts = <58>;
+      clock-frequency = <100000>;
+    };
+...

new file mode 100644
index 000000000000..d57460cbe5e3
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/microchip,mfps-rtc.yaml#
+
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire Soc (MPFS) RTC Device Tree Bindings
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Daire McNamara <[email protected]>
+  - Lewis Hanly <[email protected]>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mpfs-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  microchip,prescaler:
+    description: |
+      The prescaler divides the input frequency to create a time-based strobe (typically 1 Hz) for
+      the calendar counter. The Alarm and Compare Registers, in conjunction with the calendar
+      counter, facilitate time-matched events. To properly operate in Calendar or Binary mode,
+      the 26-bit prescaler must be programmed to generate a strobe to the RTC.
+    maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: rtc
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/microchip,mpfs-clock.h>
+    rtc@20124000 {
+        compatible = "microchip,mpfs-rtc";
+        reg = <0x20124000 0x1000>;
+        clocks = <&clkcfg CLK_RTC>;
+        clock-names = "rtc";
+        interrupts = <80>, <81>;
+    };
+...

new file mode 100644
index 000000000000..47a76f0e32b9
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/microchip,mpfs-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MPFS GPIO Controller Device Tree Bindings
+
+maintainers:
+  - Conor Dooley <[email protected]>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - microchip,mpfs-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt mapping, one per GPIO. Maximum 32 GPIOs.
+    minItems: 1
+    maxItems: 32
+
+  interrupt-controller: true
+
+  clocks:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  "#interrupt-cells":
+    const: 1
+
+  ngpios:
+    description:
+      The number of GPIOs available.
+    minimum: 1
+    maximum: 32
+    default: 32
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-controller
+  - "#gpio-cells"
+  - gpio-controller
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/clock/microchip,mpfs-clock.h"
+    gpio@20122000 {
+        compatible = "microchip,mpfs-gpio";
+        reg = <0x20122000 0x1000>;
+        clocks = <&clkcfg CLK_GPIO2>;
+        interrupt-parent = <&plic>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        interrupts = <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>;
+    };
+...

new file mode 100644
index 000000000000..ece261b8e963
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/microchip,mpfs-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MPFS {Q,}SPI Controller Device Tree Bindings
+
+maintainers:
+  - Conor Dooley <[email protected]>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - microchip,mpfs-spi
+      - microchip,mpfs-qspi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/clock/microchip,mpfs-clock.h"
+    spi@20108000 {
+        compatible = "microchip,mpfs-spi";
+        reg = <0x20108000 0x1000>;
+        clocks = <&clkcfg CLK_SPI0>;
+        interrupt-parent = <&plic>;
+        interrupts = <54>;
+        spi-max-frequency = <25000000>;
+    };
+...

new file mode 100644
index 000000000000..48c458c65848
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/microchip,mpfs-musb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MPFS USB Controller Device Tree Bindings
+
+allOf:
+  - $ref: usb-drd.yaml#
+
+maintainers:
+  - Conor Dooley <[email protected]>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mpfs-musb
+
+  dr_mode: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: dma
+      - const: mc
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/clock/microchip,mpfs-clock.h"
+    usb@20201000 {
+        compatible = "microchip,mpfs-musb";
+        reg = <0x20201000 0x1000>;
+        clocks = <&clkcfg CLK_USB>;
+        interrupt-parent = <&plic>;
+        interrupts = <86>, <87>;
+        interrupt-names = "dma", "mc";
+        dr_mode = "host";
+    };
+
+...

new file mode 100644
index 000000000000..26a77cde2465
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/microchip,corepwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip ip core PWM controller bindings
+
+maintainers:
+  - Conor Dooley <[email protected]>
+
+description: |
+  corePWM is an 16 channel pulse width modulator FPGA IP
+
+  https://www.microsemi.com/existing-parts/parts/152118
+
+properties:
+  compatible:
+    items:
+      - const: microchip,corepwm-rtl-v4
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+  microchip,sync-update:
+    description: |
+      In synchronous mode, all channels are updated at the beginning of the PWM period.
+      Asynchronous mode is relevant to applications such as LED control, where
+      synchronous updates are not required. Asynchronous mode lowers the area size,
+      reducing shadow register requirements. This can be set at run time, provided
+      SHADOW_REG_EN is asserted. SHADOW_REG_EN is set by the FPGA bitstream programmed
+      to the device.
+      Each bit corresponds to a PWM channel & represents whether synchronous mode is
+      possible for the PWM channel.
+
+    $ref: /schemas/types.yaml#/definitions/uint16
+    default: 0
+
+  microchip,dac-mode:
+    description: |
+      Optional, per-channel Low Ripple DAC mode is possible on this IP core. It creates
+      a minimum period pulse train whose High/Low average is that of the chosen duty
+      cycle. This "DAC" will have far better bandwidth and ripple performance than the
+      standard PWM algorithm can achieve.
+      Each bit corresponds to a PWM channel & represents whether dac mode is enabled
+      that PWM channel.
+
+    $ref: /schemas/types.yaml#/definitions/uint16
+    default: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#pwm-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/clock/microchip,mpfs-clock.h"
+    pwm@41000000 {
+      compatible = "microchip,corepwm-rtl-v4";
+      microchip,sync-update = /bits/ 16 <0>;
+      clocks = <&clkcfg CLK_FIC3>;
+      reg = <0x41000000 0xF0>;
+      #pwm-cells = <2>;
+    };

index 0c748ae1b006..6d19ba196f12 100644
@@ -31,7 +31,7 @@ cpus {
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x40000000>;
-		clocks = <&clkcfg 26>;
+		clocks = <&clkcfg CLK_DDRC>;
 	};
 };
 

index 869aaf0d5c06..717e39b30a15 100644
@@ -2,6 +2,7 @@
 /* Copyright (c) 2020 Microchip Technology Inc */
 
 /dts-v1/;
+#include "dt-bindings/clock/microchip,mpfs-clock.h"
 
 / {
 	#address-cells = <2>;

@@ -14,7 +15,6 @@ cpus {
 		#size-cells = <0>;
 
 		cpu@0 {
-			clock-frequency = <0>;
 			compatible = "sifive,e51", "sifive,rocket0", "riscv";
 			device_type = "cpu";
 			i-cache-block-size = <64>;

@@ -22,6 +22,7 @@ cpu@0 {
 			i-cache-size = <16384>;
 			reg = <0>;
 			riscv,isa = "rv64imac";
+			clocks = <&clkcfg CLK_CPU>;
 			status = "disabled";
 
 			cpu0_intc: interrupt-controller {

@@ -32,7 +33,6 @@ cpu0_intc: interrupt-controller {
 		};
 
 		cpu@1 {
-			clock-frequency = <0>;
 			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
 			d-cache-block-size = <64>;
 			d-cache-sets = <64>;

@@ -48,6 +48,7 @@ cpu@1 {
 			mmu-type = "riscv,sv39";
 			reg = <1>;
 			riscv,isa = "rv64imafdc";
+			clocks = <&clkcfg CLK_CPU>;
 			tlb-split;
 			status = "okay";
 

@@ -59,7 +60,6 @@ cpu1_intc: interrupt-controller {
 		};
 
 		cpu@2 {
-			clock-frequency = <0>;
 			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
 			d-cache-block-size = <64>;
 			d-cache-sets = <64>;

@@ -75,6 +75,7 @@ cpu@2 {
 			mmu-type = "riscv,sv39";
 			reg = <2>;
 			riscv,isa = "rv64imafdc";
+			clocks = <&clkcfg CLK_CPU>;
 			tlb-split;
 			status = "okay";
 

@@ -86,7 +87,6 @@ cpu2_intc: interrupt-controller {
 		};
 
 		cpu@3 {
-			clock-frequency = <0>;
 			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
 			d-cache-block-size = <64>;
 			d-cache-sets = <64>;

@@ -102,6 +102,7 @@ cpu@3 {
 			mmu-type = "riscv,sv39";
 			reg = <3>;
 			riscv,isa = "rv64imafdc";
+			clocks = <&clkcfg CLK_CPU>;
 			tlb-split;
 			status = "okay";
 

@@ -113,7 +114,6 @@ cpu3_intc: interrupt-controller {
 		};
 
 		cpu@4 {
-			clock-frequency = <0>;
 			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
 			d-cache-block-size = <64>;
 			d-cache-sets = <64>;

@@ -129,6 +129,7 @@ cpu@4 {
 			mmu-type = "riscv,sv39";
 			reg = <4>;
 			riscv,isa = "rv64imafdc";
+			clocks = <&clkcfg CLK_CPU>;
 			tlb-split;
 			status = "okay";
 			cpu4_intc: interrupt-controller {

@@ -210,7 +211,7 @@ serial0: serial@20000000 {
 			interrupt-parent = <&plic>;
 			interrupts = <90>;
 			current-speed = <115200>;
-			clocks = <&clkcfg 8>;
+			clocks = <&clkcfg CLK_MMUART0>;
 			status = "disabled";
 		};
 

@@ -222,7 +223,7 @@ serial1: serial@20100000 {
 			interrupt-parent = <&plic>;
 			interrupts = <91>;
 			current-speed = <115200>;
-			clocks = <&clkcfg 9>;
+			clocks = <&clkcfg CLK_MMUART1>;
 			status = "disabled";
 		};
 

@@ -234,7 +235,7 @@ serial2: serial@20102000 {
 			interrupt-parent = <&plic>;
 			interrupts = <92>;
 			current-speed = <115200>;
-			clocks = <&clkcfg 10>;
+			clocks = <&clkcfg CLK_MMUART2>;
 			status = "disabled";
 		};
 

@@ -246,7 +247,7 @@ serial3: serial@20104000 {
 			interrupt-parent = <&plic>;
 			interrupts = <93>;
 			current-speed = <115200>;
-			clocks = <&clkcfg 11>;
+			clocks = <&clkcfg CLK_MMUART3>;
 			status = "disabled";
 		};
 

@@ -256,7 +257,7 @@ mmc: mmc@20008000 {
 			reg = <0x0 0x20008000 0x0 0x1000>;
 			interrupt-parent = <&plic>;
 			interrupts = <88>, <89>;
-			clocks = <&clkcfg 6>;
+			clocks = <&clkcfg CLK_MMC>;
 			max-frequency = <200000000>;
 			status = "disabled";
 		};

@@ -267,7 +268,7 @@ emac0: ethernet@20110000 {
 			interrupt-parent = <&plic>;
 			interrupts = <64>, <65>, <66>, <67>;
 			local-mac-address = [00 00 00 00 00 00];
-			clocks = <&clkcfg 4>, <&clkcfg 2>;
+			clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>;
 			clock-names = "pclk", "hclk";
 			status = "disabled";
 			#address-cells = <1>;

@@ -280,7 +281,7 @@ emac1: ethernet@20112000 {
 			interrupt-parent = <&plic>;
 			interrupts = <70>, <71>, <72>, <73>;
 			local-mac-address = [00 00 00 00 00 00];
-			clocks = <&clkcfg 5>, <&clkcfg 2>;
+			clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>;
 			status = "disabled";
 			clock-names = "pclk", "hclk";
 			#address-cells = <1>;

new file mode 100644
index 000000000000..c1dcd56b0679
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2021 Microchip Technology Inc */
+
+/ {
+	core_pwm0: pwm@41000000 {
+		compatible = "microchip,corepwm-rtl-v4";
+		reg = <0x0 0x41000000 0x0 0xF0>;
+		microchip,sync-update = /bits/ 16 <0>;
+		#pwm-cells = <2>;
+		clocks = <&clkcfg CLK_FIC3>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@44000000 {
+		compatible = "microchip,corei2c-rtl-v7";
+		reg = <0x0 0x44000000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkcfg CLK_FIC3>;
+		interrupt-parent = <&plic>;
+		interrupts = <122>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+};

index 6d19ba196f12..ab803f71626a 100644
@@ -68,6 +68,10 @@ &mmc {
 	sd-uhs-sdr104;
 };
 
+&i2c2 {
+	status = "okay";
+};
+
 &emac0 {
 	phy-mode = "sgmii";
 	phy-handle = <&phy0>;

@@ -86,3 +90,7 @@ phy1: ethernet-phy@9 {
 		ti,fifo-depth = <0x01>;
 	};
 };
+
+&core_pwm0 {
+	status = "okay";
+};

index 717e39b30a15..c7d73756c9b8 100644
@@ -3,6 +3,7 @@
 
 /dts-v1/;
 #include "dt-bindings/clock/microchip,mpfs-clock.h"
+#include "microchip-mpfs-fabric.dtsi"
 
 / {
 	#address-cells = <2>;

index ab803f71626a..c51bd7cf500f 100644
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/* Copyright (c) 2020 Microchip Technology Inc */
+/* Copyright (c) 2020-2021 Microchip Technology Inc */
 
 /dts-v1/;
 

@@ -13,11 +13,11 @@ / {
 	compatible = "microchip,mpfs-icicle-kit", "microchip,mpfs";
 
 	aliases {
-		ethernet0 = &emac1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
+		ethernet0 = &mac1;
+		serial0 = &mmuart0;
+		serial1 = &mmuart1;
+		serial2 = &mmuart2;
+		serial3 = &mmuart3;
 	};
 
 	chosen {

@@ -39,19 +39,19 @@ &refclk {
 	clock-frequency = <600000000>;
 };
 
-&serial0 {
+&mmuart0 {
 	status = "okay";
 };
 
-&serial1 {
+&mmuart1 {
 	status = "okay";
 };
 
-&serial2 {
+&mmuart2 {
 	status = "okay";
 };
 
-&serial3 {
+&mmuart3 {
 	status = "okay";
 };
 

@@ -61,7 +61,10 @@ &mmc {
 	bus-width = <4>;
 	disable-wp;
 	cap-sd-highspeed;
+	cap-mmc-highspeed;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
 	sd-uhs-sdr12;
 	sd-uhs-sdr25;
 	sd-uhs-sdr50;

@@ -72,22 +75,22 @@ &i2c2 {
 	status = "okay";
 };
 
-&emac0 {
+&mac0 {
 	phy-mode = "sgmii";
 	phy-handle = <&phy0>;
-	phy0: ethernet-phy@8 {
-		reg = <8>;
-		ti,fifo-depth = <0x01>;
-	};
 };
 
-&emac1 {
+&mac1 {
 	status = "okay";
 	phy-mode = "sgmii";
 	phy-handle = <&phy1>;
 	phy1: ethernet-phy@9 {
 		reg = <9>;
-		ti,fifo-depth = <0x01>;
+		ti,fifo-depth = <0x1>;
+	};
+	phy0: ethernet-phy@8 {
+		reg = <8>;
+		ti,fifo-depth = <0x1>;
 	};
 };
 

176 lines not on this page · raw message

134 lines not on this page · raw message

index c51bd7cf500f..dc5f351b10c4 100644
@@ -18,20 +18,29 @@ aliases {
 		serial1 = &mmuart1;
 		serial2 = &mmuart2;
 		serial3 = &mmuart3;
+		serial4 = &mmuart4;
 	};
 
 	chosen {
-		stdout-path = "serial0:115200n8";
+		stdout-path = "serial1:115200n8";
 	};
 
 	cpus {
 		timebase-frequency = <RTCCLK_FREQ>;
 	};
 
-	memory@80000000 {
+	ddrc_cache_lo: memory@80000000 {
 		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x40000000>;
+		reg = <0x0 0x80000000 0x0 0x2e000000>;
 		clocks = <&clkcfg CLK_DDRC>;
+		status = "okay";
+	};
+
+	ddrc_cache_hi: memory@1000000000 {
+		device_type = "memory";
+		reg = <0x10 0x0 0x0 0x40000000>;
+		clocks = <&clkcfg CLK_DDRC>;
+		status = "okay";
 	};
 };
 

@@ -39,10 +48,6 @@ &refclk {
 	clock-frequency = <600000000>;
 };
 
-&mmuart0 {
-	status = "okay";
-};
-
 &mmuart1 {
 	status = "okay";
 };

@@ -55,6 +60,10 @@ &mmuart3 {
 	status = "okay";
 };
 
+&mmuart4 {
+	status = "okay";
+};
+
 &mmc {
 	status = "okay";
 

index 62bd00092bcc..5e7aaaf42cde 100644
@@ -174,15 +174,6 @@ clint: clint@2000000 {
 					      <&cpu4_intc 3>, <&cpu4_intc 7>;
 		};
 
-		dma@3000000 {
-			compatible = "sifive,fu540-c000-pdma";
-			reg = <0x0 0x3000000 0x0 0x8000>;
-			interrupt-parent = <&plic>;
-			interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>,
-				     <30>;
-			#dma-cells = <1>;
-		};
-
 		plic: interrupt-controller@c000000 {
 			compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
 			reg = <0x0 0xc000000 0x0 0x4000000>;

@@ -213,7 +204,7 @@ mmuart0: serial@20000000 {
 			interrupts = <90>;
 			current-speed = <115200>;
 			clocks = <&clkcfg CLK_MMUART0>;
-			status = "disabled";
+			status = "disabled"; /* Reserved for the HSS */
 		};
 
 		mmuart1: serial@20100000 {

@@ -252,6 +243,18 @@ mmuart3: serial@20104000 {
 			status = "disabled";
 		};
 
+		mmuart4: serial@20106000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x20106000 0x0 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupt-parent = <&plic>;
+			interrupts = <94>;
+			clocks = <&clkcfg CLK_MMUART4>;
+			current-speed = <115200>;
+			status = "disabled";
+		};
+
 		/* Common node entry for emmc/sd */
 		mmc: mmc@20008000 {
 			compatible = "microchip,mpfs-sd4hc", "cdns,sd4hc";

index dc5f351b10c4..cd2fe80fa81a 100644
@@ -80,6 +80,26 @@ &mmc {
 	sd-uhs-sdr104;
 };
 
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
 &i2c2 {
 	status = "okay";
 };

@@ -103,6 +123,39 @@ phy0: ethernet-phy@8 {
 	};
 };
 
+&gpio2 {
+	interrupts = <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>;
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&mbox {
+	status = "okay";
+};
+
+&syscontroller {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
 &core_pwm0 {
 	status = "okay";
 };

179 lines not on this page · raw message

index 7a2345ce8521..3b1d6be7bd56 100644
@@ -16348,8 +16348,10 @@ K:	riscv
 
 RISC-V/MICROCHIP POLARFIRE SOC SUPPORT
 M:	Lewis Hanly <[email protected]>
+M:	Conor Dooley <[email protected]>
 L:	[email protected]
 S:	Supported
+F:	arch/riscv/boot/dts/microchip/
 F:	drivers/mailbox/mailbox-mpfs.c
 F:	drivers/soc/microchip/
 F:	include/soc/microchip/mpfs.h