Add LTRF216A Driver
Subsystems (2)
v5 cover Add LTRF216A Driver
This patchset adds support for ltrf216a Ambient Light Sensor and documents the DT bindings for the same.
Changes in v5
- Add power management support.
- Add reset functionality.
- Use readx_poll_timeout() to get data.
- Cleanup some of the redundant code.
- Update int_time_fac after I2C write is successful.
- Rename mutex to lock.
- Use Reverse Xmas tree pattern for all variable definitions.
- Improve error handling messages and add error codes.
- Add one more MODULE_AUTHOR.
- Remove cleardata which was reading data for infrared light.
- Remove patch for deprecated vendor prefix [PATCH v4 3/3].
- Remove deprecated string from DT binding document.
Changes in v4
- Add more descriptive comment for mutex lock
- Fix mutex locking in read_raw()
- Use i2c_smbus_read_i2c_block_data()
Changes in v3
- Use u16 instead of u8 for int_time_fac
- Reorder headers in ltrf216a.c file
- Remove int_time_mapping table and use int_time_available
- Fix indentation in the bindings file.
Changes in v2
- Add support for 25ms and 50ms integration time.
- Rename some of the macros as per names given in datasheet
- Add a comment for the mutex lock
- Use read_avail callback instead of attributes and set the appropriate _available bit.
- Use FIELD_PREP() at appropriate places.
- Add a constant lookup table for integration time and reg val
- Use BIT() macro for magic numbers.
- Improve error handling at few places.
- Use get_unaligned_le24() and div_u64()
- Use probe_new() callback and devm functions
- Return errors in probe using dev_err_probe()
- Use DEFINE_SIMPLE_DEV_PM_OPS()
- Correct the formula for lux to use 0.45 instead of 0.8
- Add interrupt and power supply property in DT bindings
- Add vendor prefix name as per the alphabetical order.
Shreeya Patel (2):
dt-bindings: Document ltrf216a light sensor bindings
iio: light: Add support for ltrf216a sensor
.../bindings/iio/light/liteon,ltrf216a.yaml | 50 ++ drivers/iio/light/Kconfig | 10 + drivers/iio/light/Makefile | 1 + drivers/iio/light/ltrf216a.c | 441 ++++++++++++++++++ 4 files changed, 502 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml create mode 100644 drivers/iio/light/ltrf216a.c
Signature · 1 line
2.30.2
PATCH v5 1/2 dt-bindings: Document ltrf216a light sensor bindings
Add devicetree bindings for ltrf216a ambient light sensor.
---
Changes in v5
- Remove deprecated string 'ltr' from the bindings.
Changes in v3
- Fix indentation in the example section
Changes in v2
- Take over the maintainership for the bindings
- Add interrupt and power supply property in DT bindings
.../bindings/iio/light/liteon,ltrf216a.yaml | 50 +++++++++++++++++++ 1 file changed, 50 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml new file +50 -0
@@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/liteon,ltrf216a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LTRF216A Ambient Light Sensor + +maintainers: + - Shreeya Patel <[email protected]> + +description: + Ambient light sensing with an i2c interface. + +properties: + compatible: + const: + - liteon,ltrf216a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator that provides power to the sensor. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@53 { + compatible = "liteon,ltrf216a"; + reg = <0x53>; + vdd-supply = <&vdd_regulator>; + interrupt-parent = <&gpio0>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + }; + };
Signature · 1 line
2.30.2
Rob Herring
maintainerRe: [PATCH v5 1/2] dt-bindings: Document ltrf216a light sensor bindings
Quoted 10 lines · Shreeya Patel
Add devicetree bindings for ltrf216a ambient light sensor.
Signed-off-by Shreeya Patel <[email protected]>---
Changes in v5
- Remove deprecated string 'ltr' from the bindings.Changes in v3
- Fix indentation in the example section
Quoted 8 lines
Changes in v2
- Take over the maintainership for the bindings
- Add interrupt and power supply property in DT bindings.../bindings/iio/light/liteon,ltrf216a.yaml | 50 +++++++++++++++++++ 1 file changed, 50 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml: properties:compatible:const: ['liteon,ltrf216a'] is not of type 'string'
from schema $id: http://devicetree.org/meta-schemas/string-array.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml: ignoring, error in schema: properties: compatible: const Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.example.dtb:0:0: /example-0/i2c/light-sensor@53: failed to match any schema with compatible: ['liteon,ltrf216a']
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/
This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:
pip3 install dtschema --upgrade
Please check and re-submit.
PATCH v5 2/2 iio: light: Add support for ltrf216a sensor
In reply to Shreeya PatelFrom: Zhigang Shi <[email protected]>
Add initial support for ltrf216a ambient light sensor.
Datasheet: gitlab.steamos.cloud/shreeya/iio/-/blob/main/LTRF216A.pdf
---
Note :-
This patch generates the below mentioned warnings due to not documenting the 'ltr' string in vendors-prefix.yaml and liteon,ltrf216a.yaml files. The thread for the discussion of not documenting 'ltr' as deprecated prefix can be found here.
https://lore.kernel.org/lkml/[email protected]/
There are released devices which uses ltr216a light sensor and exposes the vendor prefix name as 'ltr' through ACPI. Hence, we would like to add this string under compatible property which would help probe the light sensor driver.
WARNING: DT compatible string "ltr,ltrf216a" appears un-documented -- check ./Documentation/devicetree/bindings/
#474: FILE: drivers/iio/light/ltrf216a.c:421:
+ { .compatible = "ltr,ltrf216a", },
WARNING: DT compatible string vendor "ltr" appears un-documented -- check ./Documentation/devicetree/bindings/vendor-prefixes.yaml #474: FILE: drivers/iio/light/ltrf216a.c:421:
+ { .compatible = "ltr,ltrf216a", },
Changes in v5
- Add power management support.
- Add reset functionality.
- Use readx_poll_timeout() to get data.
- Cleanup some of the redundant code.
- Update int_time_fac after I2C write is successful.
- Rename mutex to lock.
- Use Reverse Xmas tree pattern for all variable definitions.
- Improve error handling messages and add error codes.
- Add one more MODULE_AUTHOR.
- Remove cleardata which was reading data for infrared light.
Changes in v4
- Add more descriptive comment for mutex lock
- Fix mutex locking in read_raw()
- Use i2c_smbus_read_i2c_block_data()
Changes in v3
- Use u16 instead of u8 for int_time_fac
- Reorder headers in ltrf216a.c file
- Remove int_time_mapping table and use int_time_available
Changes in v2
- Add support for 25ms and 50ms integration time.
- Rename some of the macros as per names given in datasheet
- Add a comment for the mutex lock
- Use read_avail callback instead of attributes and set the appropriate _available bit.
- Use FIELD_PREP() at appropriate places.
- Add a constant lookup table for integration time and reg val
- Use BIT() macro for magic numbers.
- Improve error handling at few places.
- Use get_unaligned_le24() and div_u64()
- Use probe_new() callback and devm functions
- Return errors in probe using dev_err_probe()
- Use DEFINE_SIMPLE_DEV_PM_OPS()
- Correct the formula for lux to use 0.45 instead of 0.8
drivers/iio/light/Kconfig | 10 + drivers/iio/light/Makefile | 1 + drivers/iio/light/ltrf216a.c | 441 +++++++++++++++++++++++++++++++++++ 3 files changed, 452 insertions(+) create mode 100644 drivers/iio/light/ltrf216a.c
drivers/iio/light/Kconfig +10 -0
@@ -332,6 +332,16 @@ config LTR501 This driver can also be built as a module. If so, the module will be called ltr501. +config LTRF216A + tristate "Liteon LTRF216A Light Sensor" + depends on I2C + help + If you say Y or M here, you get support for Liteon LTRF216A + Ambient Light Sensor. + + If built as a dynamically linked module, it will be called + ltrf216a. + config LV0104CS tristate "LV0104CS Ambient Light Sensor" depends on I2C
drivers/iio/light/Makefile +1 -0
@@ -31,6 +31,7 @@ obj-$(CONFIG_ISL29125) += isl29125.o obj-$(CONFIG_JSA1212) += jsa1212.o obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o obj-$(CONFIG_LTR501) += ltr501.o +obj-$(CONFIG_LTRF216A) += ltrf216a.o obj-$(CONFIG_LV0104CS) += lv0104cs.o obj-$(CONFIG_MAX44000) += max44000.o obj-$(CONFIG_MAX44009) += max44009.o
drivers/iio/light/ltrf216a.c new file +441 -0
441 lines not on this page · raw message
Signature · 1 line
2.30.2
Re: [PATCH v5 2/2] iio: light: Add support for ltrf216a sensor
Quoted 6 lines · Shreeya Patel
From: Zhigang Shi <[email protected]>
Add initial support for ltrf216a ambient light sensor.
Datasheet: gitlab.steamos.cloud/shreeya/iio/-/blob/main/LTRF216A.pdf
https?
...
Quoted 1 line
+#define
LTRF216A_ALS_READ_DATA_DELAY20000
What units?
...
Quoted 1 line
+/* Window Factor is needed when device is under Window glass
the device
Quoted 1 line
+ * with coated tinted ink. This is to compensate the light loss
for the?
Quoted 2 lines
+ * due to the lower transmission rate of the window glass.
+ */
/*
* Multi-line comments should look
* like this very example. Find the difference.
*/
...
drivers/iio/light/ltrf216a.c line 86
Quoted 4 lines
drivers/iio/light/ltrf216a.c new file +4
-0+static int ltrf216a_init (struct iio_dev *indio_dev) +{ +struct ltrf216a_data *data =iio_priv (indio_dev); +int ret =0 ;
Useless assignment.
drivers/iio/light/ltrf216a.c line 89
Quoted 3 lines
drivers/iio/light/ltrf216a.c new file +3
-0+ +/* enable sensor */ + ret |=FIELD_PREP (LTRF216A_ALS_ENABLE_MASK ,1 );
This is bad code. Use another variable with distinguashable name.
Quoted 1 line
+ ret =
i2c_smbus_write_byte_data(data->client, LTRF216A_MAIN_CTRL, ret);
Can this driver utilize regmap I2C?
Quoted 6 lines
drivers/iio/light/ltrf216a.c new file +6
-0+if (ret <0 ) +dev_err (&data->client->dev, +"Error writing to LTRF216A_MAIN_CTRL while enabling the sensor: %d\n" , ret); + +return ret; +}
...
drivers/iio/light/ltrf216a.c line 113
Quoted 4 lines
drivers/iio/light/ltrf216a.c new file +4
-0+static int ltrf216a_disable (struct iio_dev *indio_dev) +{ +struct ltrf216a_data *data =iio_priv (indio_dev); +int ret =0 ;
Useless assignment.
drivers/iio/light/ltrf216a.c line 119
Quoted 6 lines
drivers/iio/light/ltrf216a.c new file +5
-0+ ret =i2c_smbus_write_byte_data (data->client,LTRF216A_MAIN_CTRL ,0 ); +if (ret <0 ) +dev_err (&data->client->dev, +"Error writing to LTRF216A_MAIN_CTRL while disabling the sensor: %d\n" , + ret);
With a temporary variable for the device this may be located on one line. Same for the similar cases.
Quoted 2 lines
(quoted diff) +2
-0+ return ret; +}
...
Quoted 1 line
+#ifdef
CONFIG_PM
Why? Can't it be hidden by using pm_sleep_ptr() or alike?
drivers/iio/light/ltrf216a.c line 170
Quoted 4 lines
drivers/iio/light/ltrf216a.c new file +4
-0+static int ltrf216a_set_power_state (struct ltrf216a_data *data,bool on) +{ +struct device *dev = &data->client->dev; +int ret =0 , suspended;
Useless assignment. Please, go thru all your code and drop these potentially dangerous assignments.
Quoted 21 lines
drivers/iio/light/ltrf216a.c new file +21
-0+ +if (on) { + suspended =pm_runtime_suspended (dev); + ret =pm_runtime_get_sync (dev); + +/* Allow one integration cycle before allowing a reading */ +if (suspended) +msleep (ltrf216a_int_time_reg[0 ][0 ]); + }else { +pm_runtime_mark_last_busy (dev); + ret =pm_runtime_put_autosuspend (dev); + } + + return ret; +} +#else +static int ltrf216a_set_power_state (struct ltrf216a_data *data,bool on) +{ +return 0 ; +} +#endif
drivers/iio/light/ltrf216a.c line 200
Quoted 10 lines
drivers/iio/light/ltrf216a.c new file +9
-0+ +int ltrf216a_check_for_data (struct i2c_client *client) +{ +int ret; + + ret =i2c_smbus_read_byte_data (client,LTRF216A_MAIN_STATUS ); +if (ret <0 ) { +dev_err (&client->dev,"Failed to read LTRF216A_MAIN_STATUS register: %d\n" , ret); +return ret;
Dup.
Quoted 4 lines
drivers/iio/light/ltrf216a.c new file +4
-0+ } + +return ret; +}
...
Quoted 1 line
+#ifdef
CONFIG_PM_SLEEP
Oh, please no.
Quoted 1 line
+#endif
...
drivers/iio/light/ltrf216a.c line 411
Quoted 6 lines
drivers/iio/light/ltrf216a.c new file +6
-0+static const struct dev_pm_ops ltrf216a_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) +SET_RUNTIME_PM_OPS (ltrf216a_runtime_suspend, + ltrf216a_runtime_resume,NULL ) +};
Use pm_sleep_ptr() and corresponding top-level macros.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [PATCH v5 2/2] iio: light: Add support for ltrf216a sensor
Quoted 37 lines · Andy Shevchenko
Quoted 5 lines · Shreeya Patel
From: Zhigang Shi <[email protected]>
Add initial support for ltrf216a ambient light sensor.
Datasheet: gitlab.steamos.cloud/shreeya/iio/-/blob/main/LTRF216A.pdf
https?
...
Quoted 1 line
+#define
LTRF216A_ALS_READ_DATA_DELAY20000What units?
...
Quoted 1 line
+/* Window Factor is needed when device is under Window glass
the device
Quoted 1 line
+ * with coated tinted ink. This is to compensate the light loss
for the?
Quoted 2 lines
+ * due to the lower transmission rate of the window glass.
+ *//*
* Multi-line comments should look
* like this very example. Find the difference.
*/...
drivers/iio/light/ltrf216a.c line 86
Quoted 4 lines
drivers/iio/light/ltrf216a.c new file +4
-0+static int ltrf216a_init (struct iio_dev *indio_dev) +{ +struct ltrf216a_data *data =iio_priv (indio_dev); +int ret =0 ;Useless assignment.
Quoted 7 lines
drivers/iio/light/ltrf216a.c line 89
Quoted 3 lines
drivers/iio/light/ltrf216a.c new file +3
-0+ +/* enable sensor */ + ret |=FIELD_PREP (LTRF216A_ALS_ENABLE_MASK ,1 );This is bad code. Use another variable with distinguashable name.
Quoted 1 line
+ ret =
i2c_smbus_write_byte_data(data->client, LTRF216A_MAIN_CTRL, ret);Can this driver utilize regmap I2C?
Thanks for all your comments and yes we can use the regmap I2C but the plan is to get the basic version merged and then I'll be sending patches for any enhancements that we'd like to do.
Thanks,
Shreeya Patel
Quoted 89 lines
Quoted 7 lines
drivers/iio/light/ltrf216a.c new file +6
-0+if (ret <0 ) +dev_err (&data->client->dev, +"Error writing to LTRF216A_MAIN_CTRL while enabling the sensor: %d\n" , ret); + +return ret; +}...
drivers/iio/light/ltrf216a.c line 113
Quoted 4 lines
drivers/iio/light/ltrf216a.c new file +4
-0+static int ltrf216a_disable (struct iio_dev *indio_dev) +{ +struct ltrf216a_data *data =iio_priv (indio_dev); +int ret =0 ;Useless assignment.
drivers/iio/light/ltrf216a.c line 119
Quoted 5 lines
drivers/iio/light/ltrf216a.c new file +5
-0+ ret =i2c_smbus_write_byte_data (data->client,LTRF216A_MAIN_CTRL ,0 ); +if (ret <0 ) +dev_err (&data->client->dev, +"Error writing to LTRF216A_MAIN_CTRL while disabling the sensor: %d\n" , + ret);With a temporary variable for the device this may be located on one line. Same for the similar cases.
Quoted 2 lines
(quoted diff) +2
-0+ return ret; +}...
Quoted 1 line
+#ifdef
CONFIG_PMWhy? Can't it be hidden by using
pm_sleep_ptr()or alike?drivers/iio/light/ltrf216a.c line 170
Quoted 4 lines
drivers/iio/light/ltrf216a.c new file +4
-0+static int ltrf216a_set_power_state (struct ltrf216a_data *data,bool on) +{ +struct device *dev = &data->client->dev; +int ret =0 , suspended;Useless assignment. Please, go thru all your code and drop these potentially dangerous assignments.
Quoted 20 lines
drivers/iio/light/ltrf216a.c new file +20
-0+ +if (on) { + suspended =pm_runtime_suspended (dev); + ret =pm_runtime_get_sync (dev); + +/* Allow one integration cycle before allowing a reading */ +if (suspended) +msleep (ltrf216a_int_time_reg[0 ][0 ]); + }else { +pm_runtime_mark_last_busy (dev); + ret =pm_runtime_put_autosuspend (dev); + } + + return ret; +} +#else +static int ltrf216a_set_power_state (struct ltrf216a_data *data,bool on) +{ +return 0 ; +}drivers/iio/light/ltrf216a.c line 200
Quoted 10 lines
drivers/iio/light/ltrf216a.c new file +10
-0+#endif + +int ltrf216a_check_for_data (struct i2c_client *client) +{ +int ret; + + ret =i2c_smbus_read_byte_data (client,LTRF216A_MAIN_STATUS ); +if (ret <0 ) { +dev_err (&client->dev,"Failed to read LTRF216A_MAIN_STATUS register: %d\n" , ret); +return ret;Dup.
Quoted 4 lines
drivers/iio/light/ltrf216a.c new file +4
-0+ } + +return ret; +}...
Quoted 1 line
+#ifdef
CONFIG_PM_SLEEPOh, please no.
Quoted 1 line
+#endif
...
drivers/iio/light/ltrf216a.c line 411
Quoted 6 lines
drivers/iio/light/ltrf216a.c new file +6
-0+static const struct dev_pm_ops ltrf216a_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) +SET_RUNTIME_PM_OPS (ltrf216a_runtime_suspend, + ltrf216a_runtime_resume,NULL ) +};Use
pm_sleep_ptr()and corresponding top-level macros.
kernel test robot
build botRe: [PATCH v5 2/2] iio: light: Add support for ltrf216a sensor
In reply to Shreeya PatelThank you for the patch! Perhaps something to improve:
Hi Shreeya,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on jic23-iio/togreg]
[also build test WARNING on v5.19-rc1]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/intel-lab-lkp/linux/commits/Shreeya-Patel/Add-LTRF216A-Driver/20220608-194016 base: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg config: i386-allyesconfig (https://download.01.org/0day-ci/archive/20220609/[email protected]/config) compiler: clang version 15.0.0 (https://github.com/llvm/llvm-project b92436efcb7813fc481b30f2593a4907568d917a)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/4809a7f42af19c3da77457e1aaf37ddd171fa779
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Shreeya-Patel/Add-LTRF216A-Driver/20220608-194016
git checkout 4809a7f42af19c3da77457e1aaf37ddd171fa779
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=i386 SHELL=/bin/bash drivers/iio/adc/ drivers/iio/light/
If you fix the issue, kindly add following tag where applicable
All warnings (new ones prefixed by >>):
>> drivers/iio/light/ltrf216a.c:193:5: warning: no previous prototype for function 'ltrf216a_check_for_data' [-Wmissing-prototypes]
int ltrf216a_check_for_data(struct i2c_client *client)
^ drivers/iio/light/ltrf216a.c:193:1: note: declare 'static' if the function is not intended to be used outside of this translation unit int ltrf216a_check_for_data(struct i2c_client *client)
^
static
1 warning generated.
vim +/ltrf216a_check_for_data +193 drivers/iio/light/ltrf216a.c
192
> 193 int ltrf216a_check_for_data(struct i2c_client *client)
194 {
195 int ret;
196
197 ret = i2c_smbus_read_byte_data(client, LTRF216A_MAIN_STATUS);
198 if (ret < 0) {
199 dev_err(&client->dev, "Failed to read LTRF216A_MAIN_STATUS register: %d\n", ret);
200 return ret;
201 }
202
203 return ret;
204 }
205
Signature · 2 lines
0-DAY CI Kernel Test Service https://01.org/lkp
kernel test robot
build botRe: [PATCH v5 2/2] iio: light: Add support for ltrf216a sensor
In reply to Shreeya PatelThank you for the patch! Yet something to improve:
Hi Shreeya,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on jic23-iio/togreg]
[also build test ERROR on v5.19-rc1 next-20220608]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/intel-lab-lkp/linux/commits/Shreeya-Patel/Add-LTRF216A-Driver/20220608-194016 base: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg config: sh-allmodconfig (https://download.01.org/0day-ci/archive/20220609/[email protected]/config) compiler: sh4-linux-gcc (GCC) 11.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/4809a7f42af19c3da77457e1aaf37ddd171fa779
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Shreeya-Patel/Add-LTRF216A-Driver/20220608-194016
git checkout 4809a7f42af19c3da77457e1aaf37ddd171fa779
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.3.0 make.cross W=1 O=build_dir ARCH=sh SHELL=/bin/bash drivers/iio/
If you fix the issue, kindly add following tag where applicable
All error/warnings (new ones prefixed by >>):
>> drivers/iio/light/ltrf216a.c:193:5: warning: no previous prototype for 'ltrf216a_check_for_data' [-Wmissing-prototypes]
193 | int ltrf216a_check_for_data(struct i2c_client *client)
| ^~~~~~~~~~~~~~~~~~~~~~~
In file included from include/linux/device.h:25,
from include/linux/acpi.h:15,
from include/linux/i2c.h:13,
from drivers/iio/light/ltrf216a.c:14:
>> drivers/iio/light/ltrf216a.c:409:28: error: 'ltrf216a_runtime_suspend' undeclared here (not in a function); did you mean 'pm_runtime_suspend'?
409 | SET_RUNTIME_PM_OPS(ltrf216a_runtime_suspend,
| ^~~~~~~~~~~~~~~~~~~~~~~~
include/linux/pm.h:329:28: note: in definition of macro 'RUNTIME_PM_OPS'
329 | .runtime_suspend = suspend_fn, \
| ^~~~~~~~~~
drivers/iio/light/ltrf216a.c:409:9: note: in expansion of macro 'SET_RUNTIME_PM_OPS'
409 | SET_RUNTIME_PM_OPS(ltrf216a_runtime_suspend,
| ^~~~~~~~~~~~~~~~~~
>> drivers/iio/light/ltrf216a.c:410:28: error: 'ltrf216a_runtime_resume' undeclared here (not in a function); did you mean 'ltrf216a_int_time_reg'?
410 | ltrf216a_runtime_resume, NULL)
| ^~~~~~~~~~~~~~~~~~~~~~~
include/linux/pm.h:330:27: note: in definition of macro 'RUNTIME_PM_OPS'
330 | .runtime_resume = resume_fn, \
| ^~~~~~~~~
drivers/iio/light/ltrf216a.c:409:9: note: in expansion of macro 'SET_RUNTIME_PM_OPS'
409 | SET_RUNTIME_PM_OPS(ltrf216a_runtime_suspend,
| ^~~~~~~~~~~~~~~~~~vim +409 drivers/iio/light/ltrf216a.c
405
406 static const struct dev_pm_ops ltrf216a_pm_ops = {
407 SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
408 pm_runtime_force_resume)
> 409 SET_RUNTIME_PM_OPS(ltrf216a_runtime_suspend, > 410 ltrf216a_runtime_resume, NULL)
411 };
412
Signature · 2 lines
0-DAY CI Kernel Test Service https://01.org/lkp
Jonathan Cameron
maintainerQuoted 3 lines · On Wed, 8 Jun 2022 17:05:51 +0530 Shreeya Patel <[email protected]>…
This patchset adds support for ltrf216a Ambient Light Sensor and documents the DT bindings for the same.
As Andy already gave some valuable feedback and you have a few autobuilder checks to fix up (plus I'm low on time this week) I'll wait for v6 before taking another look.
Thanks,
Jonathan
Quoted 57 lines
Changes in v5
- Add power management support.
- Add reset functionality.
- Usereadx_poll_timeout()to get data.
- Cleanup some of the redundant code.
- Updateint_time_facafter I2C write is successful.
- Rename mutex to lock.
- Use Reverse Xmas tree pattern for all variable definitions.
- Improve error handling messages and add error codes.
- Add one moreMODULE_AUTHOR.
- Remove cleardata which was reading data for infrared light.
- Remove patch for deprecated vendor prefix [PATCH v4 3/3].
- Remove deprecated string from DT binding document.Changes in v4
- Add more descriptive comment for mutex lock
- Fix mutex locking inread_raw()
- Usei2c_smbus_read_i2c_block_data()Changes in v3
- Use u16 instead of u8 forint_time_fac
- Reorder headers inltrf216a.cfile
- Removeint_time_mappingtable and useint_time_available
- Fix indentation in the bindings file.Changes in v2
- Add support for 25ms and 50ms integration time.
- Rename some of the macros as per names given in datasheet
- Add a comment for the mutex lock
- Useread_availcallback instead of attributes and set the appropriate_availablebit.
- UseFIELD_PREP()at appropriate places.
- Add a constant lookup table for integration time and reg val
- UseBIT()macro for magic numbers.
- Improve error handling at few places.
- Useget_unaligned_le24()anddiv_u64()
- Useprobe_new()callback and devm functions
- Return errors in probe usingdev_err_probe()
- UseDEFINE_SIMPLE_DEV_PM_OPS()
- Correct the formula for lux to use 0.45 instead of 0.8
- Add interrupt and power supply property in DT bindings
- Add vendor prefix name as per the alphabetical order.Shreeya Patel (2):
dt-bindings: Document ltrf216a light sensor bindings
iio: light: Add support for ltrf216a sensor.../bindings/iio/light/liteon,ltrf216a.yaml | 50 ++ drivers/iio/light/Kconfig | 10 + drivers/iio/light/Makefile | 1 + drivers/iio/light/ltrf216a.c | 441 ++++++++++++++++++ 4 files changed, 502 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml create mode 100644 drivers/iio/light/ltrf216a.c