wifi: wilc1000: fix DMA on stack objects
[email protected]
maintainerPATCH v3 1/1 wifi: wilc1000: fix DMA on stack objects
Sometimes 'wilc_sdio_cmd53' is called with addresses pointing to an object on the stack. Use dynamically allocated memory for cmd53 instead of stack address which is not DMA'able.
---
This patch is created based on [1] and changes are done as discussed in the same thread.
[1]. https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/
changes since v2:
- use 'bool' datatype instead of 'u8' for 'use_global_buf'
- add size fit check before copying to 'cmd53_buf' buffer in wilc_sdio_cmd53()
changes since v1:
- add 'use_global_buf' variable to know when to use bounce buffer
- remove unnecessary goto label
- dynamically allocate 'vmm_table'
.../net/wireless/microchip/wilc1000/netdev.h | 1 + .../net/wireless/microchip/wilc1000/sdio.c | 39 ++++++++++++++++--- .../net/wireless/microchip/wilc1000/wlan.c | 15 ++++++- 3 files changed, 47 insertions(+), 8 deletions(-)
drivers/net/wireless/microchip/wilc1000/netdev.h +1 -0
@@ -245,6 +245,7 @@ struct wilc {u8 *rx_buffer;u32 rx_buffer_offset;u8 *tx_buffer; +u32 *vmm_table;struct txq_handle txq[NQUEUES ];int txq_entries;
drivers/net/wireless/microchip/wilc1000/sdio.c +33 -6
@@ -28,6 +28,7 @@ struct wilc_sdio {u32 block_size;bool isinit;int has_thrpt_enh3; +u8 *cmd53_buf; };struct sdio_cmd52 {
@@ -47,6 +48,7 @@ struct sdio_cmd53 { u32 count: 9;u8 *buffer;u32 block_size; +bool use_global_buf; };static const struct wilc_hif_func wilc_hif_sdio;
@@ -91,6 +93,8 @@ static int wilc_sdio_cmd53(struct wilc *wilc, struct sdio_cmd53 *cmd) { struct sdio_func *func = container_of(wilc->dev, struct sdio_func, dev);int size, ret; +struct wilc_sdio *sdio_priv = wilc->bus_data; +u8 *buf = cmd->buffer;sdio_claim_host (func);
@@ -101,12 +105,23 @@ static int wilc_sdio_cmd53(struct wilc *wilc, struct sdio_cmd53 *cmd)else size = cmd->count; +if (cmd->use_global_buf) { +if (size >sizeof (u32)) +return -EINVAL ; + + buf = sdio_priv->cmd53_buf; + } +if (cmd->read_write) {/* write */ - ret =sdio_memcpy_toio (func, cmd->address, - (void *)cmd->buffer, size); +if (cmd->use_global_buf) +memcpy (buf, cmd->buffer, size); + + ret =sdio_memcpy_toio (func, cmd->address, buf, size); }else {/* read */ - ret =sdio_memcpy_fromio (func, (void *)cmd->buffer, - cmd->address, size); + ret =sdio_memcpy_fromio (func, buf, cmd->address, size); + +if (cmd->use_global_buf) +memcpy (cmd->buffer, buf, size); }sdio_release_host (func);
@@ -128,6 +143,12 @@ static int wilc_sdio_probe(struct sdio_func *func,if (!sdio_priv)return -ENOMEM ; + sdio_priv->cmd53_buf =kzalloc (sizeof (u32),GFP_KERNEL ); +if (!sdio_priv->cmd53_buf) { + ret = -ENOMEM ; + goto free; + } + ret =wilc_cfg80211_init (&wilc, &func->dev,WILC_HIF_SDIO , &wilc_hif_sdio);if (ret)
@@ -161,6 +182,7 @@ static int wilc_sdio_probe(struct sdio_func *func,irq_dispose_mapping (wilc->dev_irq_num);wilc_netdev_cleanup (wilc); free: +kfree (sdio_priv->cmd53_buf);kfree (sdio_priv);return ret; }
@@ -172,6 +194,7 @@ static void wilc_sdio_remove(struct sdio_func *func)clk_disable_unprepare (wilc->rtc_clk);wilc_netdev_cleanup (wilc); +kfree (sdio_priv->cmd53_buf);kfree (sdio_priv); }
@@ -375,8 +398,9 @@ static int wilc_sdio_write_reg(struct wilc *wilc, u32 addr, u32 data) cmd.address =WILC_SDIO_FBR_DATA_REG ; cmd.block_mode =0 ; cmd.increment =1 ; - cmd.count =4 ; + cmd.count =sizeof (u32); cmd.buffer = (u8 *)&data; + cmd.use_global_buf = true; cmd.block_size = sdio_priv->block_size; ret =wilc_sdio_cmd53 (wilc, &cmd);if (ret)
@@ -414,6 +438,7 @@ static int wilc_sdio_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size) nblk = size / block_size; nleft = size % block_size; + cmd.use_global_buf = false;if (nblk >0 ) { cmd.block_mode =1 ; cmd.increment =1 ;
@@ -492,8 +517,9 @@ static int wilc_sdio_read_reg(struct wilc *wilc, u32 addr, u32 *data) cmd.address =WILC_SDIO_FBR_DATA_REG ; cmd.block_mode =0 ; cmd.increment =1 ; - cmd.count =4 ; + cmd.count =sizeof (u32); cmd.buffer = (u8 *)data; + cmd.use_global_buf = true; cmd.block_size = sdio_priv->block_size; ret =wilc_sdio_cmd53 (wilc, &cmd);
@@ -535,6 +561,7 @@ static int wilc_sdio_read(struct wilc *wilc, u32 addr, u8 *buf, u32 size) nblk = size / block_size; nleft = size % block_size; + cmd.use_global_buf = false;if (nblk >0 ) { cmd.block_mode =1 ; cmd.increment =1 ;
drivers/net/wireless/microchip/wilc1000/wlan.c +13 -2
@@ -714,7 +714,7 @@ int wilc_wlan_handle_txq(struct wilc *wilc, u32 *txq_count)int ret =0 ;int counter;int timeout; -u32 vmm_table[WILC_VMM_TBL_SIZE ]; +u32 *vmm_table = wilc->vmm_table;u8 ac_pkt_num_to_chip[NQUEUES ] = {0 ,0 ,0 ,0 };const struct wilc_hif_func *func;int srcu_idx;
@@ -1252,6 +1252,8 @@ void wilc_wlan_cleanup(struct net_device *dev)while ((rqe =wilc_wlan_rxq_remove (wilc)))kfree (rqe); +kfree (wilc->vmm_table); + wilc->vmm_table =NULL ;kfree (wilc->rx_buffer); wilc->rx_buffer =NULL ;kfree (wilc->tx_buffer);
@@ -1489,6 +1491,14 @@ int wilc_wlan_init(struct net_device *dev) goto fail; } +if (!wilc->vmm_table) + wilc->vmm_table =kzalloc (WILC_VMM_TBL_SIZE ,GFP_KERNEL ); + +if (!wilc->vmm_table) { + ret = -ENOBUFS ; + goto fail; + } +if (!wilc->tx_buffer) wilc->tx_buffer =kmalloc (WILC_TX_BUFF_SIZE ,GFP_KERNEL );
@@ -1513,7 +1523,8 @@ int wilc_wlan_init(struct net_device *dev)return 0 ; fail: - +kfree (wilc->vmm_table); + wilc->vmm_table =NULL ;kfree (wilc->rx_buffer); wilc->rx_buffer =NULL ;kfree (wilc->tx_buffer);
Signature · 1 line
2.34.1
Am 2022-08-09 09:57, schrieb [email protected]:
Quoted 8 lines
Sometimes '
wilc_sdio_cmd53' is called with addresses pointing to an object on the stack. Use dynamically allocated memory for cmd53 instead of stack address which is not DMA'able.Fixes 5625f965d764 ("wilc1000: move wilc driver out of staging")Reported-by Michael Walle <[email protected]>Suggested-by Michael Walle <[email protected]>Signed-off-by Ajay Singh <[email protected]>
Thanks!
-michael
Quoted 10 lines · Michael Walle
Am 2022-08-09 09:57, schrieb [email protected]:
Quoted 8 lines
Sometimes '
wilc_sdio_cmd53' is called with addresses pointing to an object on the stack. Use dynamically allocated memory for cmd53 instead of stack address which is not DMA'able.Fixes 5625f965d764 ("wilc1000: move wilc driver out of staging")Reported-by Michael Walle <[email protected]>Suggested-by Michael Walle <[email protected]>Signed-off-by Ajay Singh <[email protected]>
Quoted 4 lines
Thanks!
Reviewed-by Michael Walle <[email protected]>Tested-by Michael Walle <[email protected]>
Thanks Michael. My plan is to take this to the wireless tree, seems important enough fix.
Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Hi Kalle,
Am 2022-08-11 06:55, schrieb Kalle Valo:
Quoted 12 lines
Quoted 10 lines · Michael Walle
Am 2022-08-09 09:57, schrieb [email protected]:
Quoted 8 lines
Sometimes '
wilc_sdio_cmd53' is called with addresses pointing to an object on the stack. Use dynamically allocated memory for cmd53 instead of stack address which is not DMA'able.Fixes 5625f965d764 ("wilc1000: move wilc driver out of staging")Reported-by Michael Walle <[email protected]>Suggested-by Michael Walle <[email protected]>Signed-off-by Ajay Singh <[email protected]>
Quoted 7 lines
Quoted 4 lines
Thanks!
Reviewed-by Michael Walle <[email protected]>Tested-by Michael Walle <[email protected]>Thanks Michael. My plan is to take this to the wireless tree, seems important enough fix.
Do you already have any plan, when you will pick this?
-michael
Quoted 16 lines · Michael Walle
Am 2022-08-11 06:55, schrieb Kalle Valo:
Quoted 15 lines
Quoted 13 lines · Michael Walle
Am 2022-08-09 09:57, schrieb [email protected]:
Quoted 9 lines
Sometimes '
wilc_sdio_cmd53' is called with addresses pointing to an object on the stack. Use dynamically allocated memory for cmd53 instead
of stack address which is not DMA'able.Fixes 5625f965d764 ("wilc1000: move wilc driver out of staging")Reported-by Michael Walle <[email protected]>Suggested-by Michael Walle <[email protected]>Signed-off-by Ajay Singh <[email protected]>Thanks!
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
Reviewed-by Michael Walle <[email protected]>Tested-by Michael Walle <[email protected]>Thanks Michael. My plan is to take this to the wireless tree, seems important enough fix.
Do you already have any plan, when you will pick this?
Any day now. I was on vacation but now back.
Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Quoted 10 lines · <[email protected]> wrote:
Sometimes '
wilc_sdio_cmd53' is called with addresses pointing to an object on the stack. Use dynamically allocated memory for cmd53 instead of stack address which is not DMA'able.Fixes 5625f965d764 ("wilc1000: move wilc driver out of staging")Reported-by Michael Walle <[email protected]>Suggested-by Michael Walle <[email protected]>Signed-off-by Ajay Singh <[email protected]>Reviewed-by Michael Walle <[email protected]>Tested-by Michael Walle <[email protected]>
Patch applied to wireless.git, thanks.
40b717bfcefa wifi: wilc1000: fix DMA on stack objects
Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches