ufs: core: Always read the descriptors with max length
Subsystems (2)
v2 cover ufs: core: Always read the descriptors with max length
v2--v3:
Based on Bean's comments:
1)Use kzalloc instead of kmalloc in ufshcd_set_active_icc_lvl - patch 2/4 2)Delete UFS_RPMB_UNIT definition - patch 2/4
3)Delete len description - patch 3/4
v1--v2:
Fix argument warning in ufshpb.c
Read any descriptor with a maximum size of QUERY_DESC_MAX_SIZE. According to the spec the device rerurns the actual size. Thus can improve code readability and save CPU cycles.
While at it, cleanup few leftovers around the descriptor size parameter.
Arthur Simchaev (4):
ufs:core: Remove redundant wb check
ufs:core: Remove redundant desc_size variable from hba
ufs: core: Remove len parameter from ufshcd_set_active_icc_lvl
ufs: core: Remove ufshcd_map_desc_id_to_length function
drivers/ufs/core/ufs_bsg.c | 7 +-- drivers/ufs/core/ufshcd-priv.h | 3 -- drivers/ufs/core/ufshcd.c | 100 ++++++++++------------------------------- drivers/ufs/core/ufshpb.c | 5 +-- include/ufs/ufshcd.h | 1 - 5 files changed, 26 insertions(+), 90 deletions(-)
Signature · 1 line
2.7.4
PATCH v3 1/4 ufs: core: Remove redundant wb check
We used to use the extended-feature field in the device descriptor, as an indication that the device supports ufs2.2 or later. Remove that as this check is specifically done few lines above.
--- drivers/ufs/core/ufshcd.c | 4 ---- 1 file changed, 4 deletions(-)
drivers/ufs/core/ufshcd.c +0 -4
@@ -7584,10 +7584,6 @@ static void ufshcd_wb_probe(struct ufs_hba *hba, const u8 *desc_buf) (hba->dev_quirks & UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES))) goto wb_disabled; -if (hba->desc_size[QUERY_DESC_IDN_DEVICE ] < -DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP +4 ) - goto wb_disabled; - ext_ufs_feature =get_unaligned_be32 (desc_buf +DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP );
Signature · 1 line
2.7.4
Re: [PATCH v3 1/4] ufs: core: Remove redundant wb check
Quoted 9 lines · Arthur Simchaev
We used to use the extended-feature field in the device descriptor,
as an indication that the device supports ufs2.2 or later.
Remove that as this check is specifically done few lines above.
Signed-off-by Arthur Simchaev <[email protected]>
PATCH v3 2/4 ufs: core: Remove redundant desc_size variable from hba
In reply to Arthur SimchaevAlways read the descriptor with QUERY_DESC_MAX_SIZE. According to the spec, the device returns the actual size
--- drivers/ufs/core/ufshcd.c | 51 ++++++++++++----------------------------------- include/ufs/ufs.h | 1 - include/ufs/ufshcd.h | 1 - 3 files changed, 13 insertions(+), 40 deletions(-)
drivers/ufs/core/ufshcd.c +13 -38
@@ -3377,28 +3377,11 @@ int ufshcd_query_descriptor_retry(struct ufs_hba *hba,void ufshcd_map_desc_id_to_length (struct ufs_hba *hba,enum desc_idn desc_id,int *desc_len) { -if (desc_id >=QUERY_DESC_IDN_MAX || desc_id ==QUERY_DESC_IDN_RFU_0 || - desc_id ==QUERY_DESC_IDN_RFU_1 ) - *desc_len =0 ; -else - *desc_len = hba->desc_size[desc_id]; +/*Always returns QUERY_DESC_MAX_SIZE*/ + *desc_len =QUERY_DESC_MAX_SIZE ; }EXPORT_SYMBOL (ufshcd_map_desc_id_to_length); -static void ufshcd_update_desc_length (struct ufs_hba *hba, -enum desc_idn desc_id,int desc_index, -unsigned char desc_len) -{ -if (hba->desc_size[desc_id] ==QUERY_DESC_MAX_SIZE && - desc_id !=QUERY_DESC_IDN_STRING && desc_index !=UFS_RPMB_UNIT ) -/* For UFS 3.1, the normal unit descriptor is 10 bytes larger -* than the RPMB unit, however, both descriptors share the same -* desc_idn, to cover both unit descriptors with one length, we -* choose the normal unit descriptor length by desc_index. -*/ - hba->desc_size[desc_id] = desc_len; -} -/** * ufshcd_read_desc_param - read the specified descriptor parameter * @hba: Pointer to adapter instance
@@ -3470,7 +3453,6 @@ int ufshcd_read_desc_param(struct ufs_hba *hba,/* Update descriptor length */ buff_len = desc_buf[QUERY_DESC_LENGTH_OFFSET ]; -ufshcd_update_desc_length (hba, desc_id, desc_index, buff_len);if (is_kmalloc) {/* Make sure we don't copy more data than available */
@@ -4909,7 +4891,7 @@ static void ufshcd_setup_links(struct ufs_hba *hba, struct scsi_device *sdev)*/ static void ufshcd_lu_init (struct ufs_hba *hba,struct scsi_device *sdev) { -int len = hba->desc_size[QUERY_DESC_IDN_UNIT ]; +int len =QUERY_DESC_MAX_SIZE ;u8 lun =ufshcd_scsi_to_upiu_lun (sdev->lun);u8 lun_qdepth = hba->nutrs;u8 *desc_buf;
@@ -7456,25 +7438,24 @@ static u32 ufshcd_find_max_sup_active_icc_level(struct ufs_hba *hba,static void ufshcd_set_active_icc_lvl (struct ufs_hba *hba) {int ret; -int buff_len = hba->desc_size[QUERY_DESC_IDN_POWER ];u8 *desc_buf;u32 icc_level; - desc_buf =kmalloc (buff_len,GFP_KERNEL ); + desc_buf =kzalloc (QUERY_DESC_MAX_SIZE ,GFP_KERNEL );if (!desc_buf)return ; ret =ufshcd_read_desc_param (hba,QUERY_DESC_IDN_POWER ,0 ,0 , - desc_buf, buff_len); + desc_buf,QUERY_DESC_MAX_SIZE );if (ret) {dev_err (hba->dev, -"%s: Failed reading power descriptor.len = %d ret = %d" , - __func__, buff_len, ret); +"%s: Failed reading power descriptor ret = %d" , + __func__, ret); goto out; } icc_level =ufshcd_find_max_sup_active_icc_level (hba, desc_buf, - buff_len); +QUERY_DESC_MAX_SIZE );dev_dbg (hba->dev,"%s: setting icc_level 0x%x" , __func__, icc_level); ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR,
@@ -7698,7 +7679,7 @@ static int ufs_get_device_desc(struct ufs_hba *hba) } err =ufshcd_read_desc_param (hba,QUERY_DESC_IDN_DEVICE ,0 ,0 , desc_buf, - hba->desc_size[QUERY_DESC_IDN_DEVICE ]); +QUERY_DESC_MAX_SIZE );if (err) {dev_err (hba->dev,"%s: Failed reading Device Desc. err = %d\n" , __func__, err);
@@ -7945,18 +7926,16 @@ static void ufshcd_clear_dbg_ufs_stats(struct ufs_hba *hba)static int ufshcd_device_geo_params_init (struct ufs_hba *hba) {int err; -size_t buff_len;u8 *desc_buf; - buff_len = hba->desc_size[QUERY_DESC_IDN_GEOMETRY ]; - desc_buf =kmalloc (buff_len,GFP_KERNEL ); + desc_buf =kmalloc (QUERY_DESC_MAX_SIZE ,GFP_KERNEL );if (!desc_buf) { err = -ENOMEM ; goto out; } err =ufshcd_read_desc_param (hba,QUERY_DESC_IDN_GEOMETRY ,0 ,0 , - desc_buf, buff_len); + desc_buf,QUERY_DESC_MAX_SIZE );if (err) {dev_err (hba->dev,"%s: Failed reading Geometry Desc. err = %d\n" , __func__, err);
@@ -7968,7 +7947,7 @@ static int ufshcd_device_geo_params_init(struct ufs_hba *hba)else if (desc_buf[GEOMETRY_DESC_PARAM_MAX_NUM_LUN ] ==0 ) hba->dev_info.max_lu_supported =8 ; -if (hba->desc_size[QUERY_DESC_IDN_GEOMETRY ] >= +if (desc_buf[QUERY_DESC_LENGTH_OFFSET ] >=GEOMETRY_DESC_PARAM_HPB_MAX_ACTIVE_REGS )ufshpb_get_geo_info (hba, desc_buf);
@@ -8053,11 +8032,7 @@ static int ufshcd_set_dev_ref_clk(struct ufs_hba *hba)static int ufshcd_device_params_init (struct ufs_hba *hba) {bool flag; -int ret, i; - -/* Init device descriptor sizes */ -for (i =0 ; i <QUERY_DESC_IDN_MAX ; i++) - hba->desc_size[i] =QUERY_DESC_MAX_SIZE ; +int ret;/* Init UFS geometry descriptor related parameters */ ret =ufshcd_device_geo_params_init (hba);
include/ufs/ufs.h +0 -1
@@ -38,7 +38,6 @@#define UFS_UPIU_MAX_UNIT_NUM_ID 0x7F#define UFS_MAX_LUNS (SCSI_W_LUN_BASE + UFS_UPIU_MAX_UNIT_NUM_ID)#define UFS_UPIU_WLUN_ID (1 << 7) -#define UFS_RPMB_UNIT 0xC4/* WriteBooster buffer is available only for the logical unit from 0 to 7 */ #define UFS_UPIU_MAX_WB_LUN_ID 8
include/ufs/ufshcd.h +0 -1
@@ -952,7 +952,6 @@ struct ufs_hba {bool is_urgent_bkops_lvl_checked;struct rw_semaphore clk_scaling_lock; -unsigned char desc_size[QUERY_DESC_IDN_MAX ];atomic_t scsi_block_reqs_cnt;struct device bsg_dev;
Signature · 1 line
2.7.4
Re: [PATCH v3 2/4] ufs: core: Remove redundant desc_size variable from hba
Quoted 10 lines · Arthur Simchaev
@ -7945,18 +7926,16 @@ static void
ufshcd_clear_dbg_ufs_stats(struct ufs_hba *hba)static int
ufshcd_device_geo_params_init(struct ufs_hba *hba){
int err;(quoted diff) +0
-1- size_t buff_len;
Review
Quoted 10 lines
(quoted diff) +1
-2u8 *desc_buf; - buff_len = hba->desc_size[QUERY_DESC_IDN_GEOMETRY]; - desc_buf = kmalloc(buff_len, GFP_KERNEL); + desc_buf = kmalloc(QUERY_DESC_MAX_SIZE, GFP_KERNEL);
here also should be kzalloc?
PATCH v3 3/4 ufs: core: Remove len parameter from ufshcd_set_active_icc_lvl
In reply to Arthur Simchaevlen argument is not used anymore in ufshcd_set_active_icc_lvl function.
--- drivers/ufs/core/ufshcd.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/ufs/core/ufshcd.c +2 -4
@@ -7391,12 +7391,11 @@ static u32 ufshcd_get_max_icc_level(int sup_curr_uA, u32 start_scan,* In case regulators are not initialized we'll return 0 * @hba: per-adapter instance * @desc_buf: power descriptor buffer to extract ICC levels from. -* @len: length of desc_buff * * Returns calculated ICC level */ static u32 ufshcd_find_max_sup_active_icc_level (struct ufs_hba *hba, -const u8 *desc_buf,int len) +const u8 *desc_buf) {u32 icc_level =0 ;
@@ -7454,8 +7453,7 @@ static void ufshcd_set_active_icc_lvl(struct ufs_hba *hba) goto out; } - icc_level =ufshcd_find_max_sup_active_icc_level (hba, desc_buf, -QUERY_DESC_MAX_SIZE ); + icc_level =ufshcd_find_max_sup_active_icc_level (hba, desc_buf);dev_dbg (hba->dev,"%s: setting icc_level 0x%x" , __func__, icc_level); ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR,
Signature · 1 line
2.7.4
Re: [PATCH v3 3/4] ufs: core: Remove len parameter from ufshcd_set_active_icc_lvl
Quoted 15 lines · Arthur Simchaev
len argument is not used anymore in
ufshcd_set_active_icc_lvlfunction.Signed-off-by Arthur Simchaev <[email protected]>--- drivers/ufs/core/ufshcd.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)drivers/ufs/core/ufshcd.c +0
-0@@ -7391,12 +7391,11 @@ static u32 ufshcd_get_max_icc_level(int sup_curr_uA, u32 start_scan, * In case regulators are not initialized we'll return 0
drivers/ufs/core/ufshcd.c static u32 ufshcd_get_max_icc_level(int · line 7400
Quoted 10 lines
drivers/ufs/core/ufshcd.c +1
-2* @hba: per-adapter instance * @desc_buf: power descriptor buffer to extract ICC levels from. -* @len: length of desc_buff * * Returns calculated ICC level */ static u32 ufshcd_find_max_sup_active_icc_level(struct ufs_hba *hba, -const u8 *desc_buf,int len) + const u8 *desc_buf)
The Linux kernel already deprecates the 80 character per line coding style, so you could keep one line here after removing len.
PATCH v3 4/4 ufs: core: Remove ufshcd_map_desc_id_to_length function
In reply to Arthur SimchaevThere shouldn't be any restriction of the descriptor size
(not the descriptor id for that matter) up to QUERY_DESC_MAX_SIZE. According to the spec, the caller can use any descriptor size,
and it is up to the device to return the actual size.
Therefore there shouldn't be any sizes hardcoded in the kernel,
nor any need to cache it, hence ufshcd_map_desc_id_to_length function is redundant. always read the descriptors with QUERY_DESC_MAX_SIZE size.
--- drivers/ufs/core/ufs_bsg.c | 7 +------ drivers/ufs/core/ufshcd-priv.h | 3 --- drivers/ufs/core/ufshcd.c | 46 +++++++++++------------------------------- drivers/ufs/core/ufshpb.c | 4 +--- 4 files changed, 14 insertions(+), 46 deletions(-)
drivers/ufs/core/ufs_bsg.c +1 -6
@@ -16,16 +16,11 @@ static int ufs_bsg_get_query_desc_size(struct ufs_hba *hba, int *desc_len, struct utp_upiu_query *qr) {int desc_size =be16_to_cpu (qr->length); -int desc_id = qr->idn;if (desc_size <=0 )return -EINVAL ; -ufshcd_map_desc_id_to_length (hba, desc_id, desc_len); -if (!*desc_len) -return -EINVAL ; - - *desc_len =min_t (int, *desc_len, desc_size); + *desc_len =min_t (int,QUERY_DESC_MAX_SIZE , desc_size);return 0 ; }
drivers/ufs/core/ufshcd-priv.h +0 -3
@@ -70,9 +70,6 @@ int ufshcd_read_string_desc(struct ufs_hba *hba, u8 desc_index,int ufshcd_hold (struct ufs_hba *hba,bool async);void ufshcd_release (struct ufs_hba *hba); -void ufshcd_map_desc_id_to_length (struct ufs_hba *hba,enum desc_idn desc_id, -int *desc_length); -int ufshcd_send_uic_cmd (struct ufs_hba *hba,struct uic_command *uic_cmd); int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba,
drivers/ufs/core/ufshcd.c +12 -34
82 lines not on this page · raw message
drivers/ufs/core/ufshpb.c +1 -3
@@ -2382,12 +2382,10 @@ static int ufshpb_get_lu_info(struct ufs_hba *hba, int lun, {u16 max_active_rgns;u8 lu_enable; -int size; +int size =QUERY_DESC_MAX_SIZE ;int ret;char desc_buf[QUERY_DESC_MAX_SIZE ]; -ufshcd_map_desc_id_to_length (hba,QUERY_DESC_IDN_UNIT , &size); -ufshcd_rpm_get_sync (hba); ret = ufshcd_query_descriptor_retry(hba, UPIU_QUERY_OPCODE_READ_DESC, QUERY_DESC_IDN_UNIT, lun, 0,
Signature · 1 line
2.7.4
Re: [PATCH v3 4/4] ufs: core: Remove ufshcd_map_desc_id_to_length function
On Mon, 2022-11-21 at 17:46 +0200, Arthur Simchaev wrote:
............
Quoted 35 lines
(quoted diff) +0
-2- if (param_offset >= buff_len) { - dev_err(hba->dev, "%s: Invalid offset 0x%x indescriptor IDN 0x%x, length 0x%x\n",
drivers/ufs/core/ufshcd.c +7
-7- __func__, param_offset, desc_id, buff_len); -return -EINVAL ; - } -/* Check whether we need temp memory */ if (param_offset !=0 || param_size < buff_len) { desc_buf =kzalloc (buff_len,GFP_KERNEL );@@ -3434,15 +3407,23 @@ int ufshcd_read_desc_param(struct ufs_hba *hba,/* Request for full descriptor */ ret =ufshcd_query_descriptor_retry (hba,UPIU_QUERY_OPCODE_READ_DESC , - desc_id, desc_index,0 , - desc_buf, &buff_len); - + desc_id, desc_index,0 , + desc_buf, &buff_len);if (ret) { dev_err(hba->dev, "%s: Failed reading descriptor. desc_id %d, desc_index %d, param_offset %d, ret %d\n", __func__, desc_id, desc_index, param_offset, ret); goto out; } +/* Update descriptor length */ + buff_len = desc_buf[QUERY_DESC_LENGTH_OFFSET ]; + +if (param_offset >= buff_len) { + dev_err(hba->dev, "%s: Invalid offset 0x%x indescriptor IDN 0x%x, length 0x%x\n",
drivers/ufs/core/ufshcd.c int ufshcd_read_desc_param(struct ufs_hba *hba, · line 3426
Quoted 4 lines
drivers/ufs/core/ufshcd.c +4
-0+ __func__, param_offset, desc_id, buff_len); +return -EINVAL ; + } +
a little bit concerned here, but understood your point that you want to anyway read descriptor, then check if param_offset is a valid input. I think, there is no problem.
All in all, this series is a very nice cleanup, we removed all unnecessary if-state, and complicated rules, making code more readable than before.
Thanks,
Bean