iio: adc: add imx93 adc support
Subsystems (4)
[email protected]
maintainerPATCH v2 1/3 iio: adc: add imx93 adc support
From: Haibo Chen <[email protected]>
The ADC in i.mx93 is a total new ADC IP, add a driver to support this ADC.
Currently, only support one shot normal conversion triggered by software. For other mode, will add in future.
--- MAINTAINERS | 4 +- drivers/iio/adc/Kconfig | 10 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/imx93_adc.c | 474 ++++++++++++++++++++++++++++++++++++ 4 files changed, 488 insertions(+), 1 deletion(-) create mode 100644 drivers/iio/adc/imx93_adc.c
MAINTAINERS +3 -1
@@ -15020,14 +15020,16 @@ S: Maintained F: Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml F: drivers/iio/adc/imx8qxp-adc.c -NXP i.MX 7D/6SX/6UL AND VF610 ADC DRIVER +NXP i.MX 7D/6SX/6UL/93 AND VF610 ADC DRIVER M: Haibo Chen <[email protected]> L: [email protected] L: [email protected] S: Maintained F: Documentation/devicetree/bindings/iio/adc/fsl,imx7d-adc.yaml F: Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml +F: Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml F: drivers/iio/adc/imx7d_adc.c +F: drivers/iio/adc/imx93_adc.c F: drivers/iio/adc/vf610_adc.c NXP PF8100/PF8121A/PF8200 PMIC REGULATOR DEVICE DRIVER
drivers/iio/adc/Kconfig +10 -0
@@ -565,6 +565,16 @@ config IMX8QXP_ADC This driver can also be built as a module. If so, the module will be called imx8qxp-adc. +config IMX93_ADC + tristate "IMX93 ADC driver" + depends on ARCH_MXC || COMPILE_TEST + depends on HAS_IOMEM + help + Say yes here to build support for IMX93 ADC. + + This driver can also be built as a module. If so, the module will be + called imx93_adc. + config LP8788_ADC tristate "LP8788 ADC driver" depends on MFD_LP8788
drivers/iio/adc/Makefile +1 -0
@@ -49,6 +49,7 @@ obj-$(CONFIG_HI8435) += hi8435.o obj-$(CONFIG_HX711) += hx711.o obj-$(CONFIG_IMX7D_ADC) += imx7d_adc.o obj-$(CONFIG_IMX8QXP_ADC) += imx8qxp-adc.o +obj-$(CONFIG_IMX93_ADC) += imx93_adc.o obj-$(CONFIG_INA2XX_ADC) += ina2xx-adc.o obj-$(CONFIG_INGENIC_ADC) += ingenic-adc.o obj-$(CONFIG_INTEL_MRFLD_ADC) += intel_mrfld_adc.o
drivers/iio/adc/imx93_adc.c new file +474 -0
474 lines not on this page · raw message
Signature · 1 line
2.34.1
[email protected]
maintainerPATCH v2 2/3 dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
From: Haibo Chen <[email protected]>
The IMX93 SoC has a new ADC IP, so add binding documentation for NXP IMX93 ADC.
--- .../bindings/iio/adc/nxp,imx93-adc.yaml | 79 +++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml new file +79 -0
@@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/nxp,imx93-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP iMX93 ADC bindings + +maintainers: + - Haibo Chen <[email protected]> + +description: + The ADC on iMX93 is a 8-channel 12-bit 1MS/s ADC with 4 channels + connected to pins. it support normal and inject mode, include + One-Shot and Scan (continuous) conversions. Programmable DMA + enables for each channel Also this ADC contain alternate analog + watchdog thresholds, select threshold through input ports. And + also has Self-test logic and Software-initiated calibration. + +properties: + compatible: + const: nxp,imx93-adc + + reg: + maxItems: 1 + + interrupts: + description: + line 0 for WDGnL (watchdog threshold) interrupt requests. + line 1 for WDGnH (watchdog threshold) interrupt requests. + line 2 for normal conversion, include EOC (End of Conversion) + interrupt request, ECH (End of Chain) interrupt request, + JEOC (End of Injected Conversion mode) interrupt request + and JECH (End of injected Chain) interrupt request. + line 3 for Self-testing Interrupts. + maxItems: 4 + + clocks: + maxItems: 1 + + vref-supply: + description: + The reference voltage which used to establish channel scaling. + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - vref-supply + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/imx93-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + soc { + #address-cells = <1>; + #size-cells = <1>; + adc@44530000 { + compatible = "nxp,imx93-adc"; + reg = <0x44530000 0x10000>; + interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_ADC1_GATE>; + clock-names = "ipg"; + vref-supply = <®_vref_1v8>; + }; + }; +...
Signature · 1 line
2.34.1
Rob Herring
maintainerRe: [PATCH v2 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
Quoted 11 lines · On Wed, 14 Dec 2022 21:35:38 +0800, [email protected] wrote:
From: Haibo Chen <[email protected]>
The IMX93 SoC has a new ADC IP, so add binding documentation for NXP IMX93 ADC.
Signed-off-by Haibo Chen <[email protected]>--- .../bindings/iio/adc/nxp,imx93-adc.yaml | 79 +++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.example.dtb: adc@44530000: '#io-channel-cells' is a required property
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.example.dtb: adc@44530000: 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
Rob Herring
maintainerRe: [PATCH v2 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
In reply to [email protected]Quoted 43 lines · On Wed, Dec 14, 2022 at 09:35:38PM +0800, [email protected] wrote:
From: Haibo Chen <[email protected]>
The IMX93 SoC has a new ADC IP, so add binding documentation for NXP IMX93 ADC.
Signed-off-by Haibo Chen <[email protected]>--- .../bindings/iio/adc/nxp,imx93-adc.yaml | 79 +++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yamlDocumentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml new file +26
-0@@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/nxp,imx93-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP iMX93 ADC bindings + +maintainers: + - Haibo Chen <[email protected]> + +description: + The ADC on iMX93 is a 8-channel 12-bit 1MS/s ADC with 4 channels + connected to pins. it support normal and inject mode, include + One-Shot and Scan (continuous) conversions. Programmable DMA + enables for each channel Also this ADC contain alternate analog + watchdog thresholds, select threshold through input ports. And + also has Self-test logic and Software-initiated calibration. + +properties: + compatible: + const: nxp,imx93-adc + + reg: + maxItems: 1 +
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml line 36
Quoted 10 lines
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml new file +10
-0+ interrupts: + description: + line 0 for WDGnL (watchdog threshold) interrupt requests. + line 1 for WDGnH (watchdog threshold) interrupt requests. + line 2 for normal conversion, include EOC (End of Conversion) + interrupt request, ECH (End of Chain) interrupt request, + JEOC (End of Injected Conversion mode) interrupt request + and JECH (End of injected Chain) interrupt request. + line 3 for Self-testing Interrupts. + maxItems: 4
Split the descriptions:
items:
- description: WDGnL ...
- description: ...
And then drop maxItems
Quoted 47 lines
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml new file +43
-0+ + clocks: + maxItems: 1 + + vref-supply: + description: + The reference voltage which used to establish channel scaling. + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - vref-supply + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/imx93-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + soc { + #address-cells = <1>; + #size-cells = <1>; + adc@44530000 { + compatible = "nxp,imx93-adc"; + reg = <0x44530000 0x10000>; + interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_ADC1_GATE>; + clock-names = "ipg"; + vref-supply = <®_vref_1v8>; + }; + }; +...Signature · 1 line
2.34.1
Re: [PATCH v2 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
In reply to [email protected]Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
Quoted 16 lines · On 14/12/2022 14:35, [email protected] wrote:
From: Haibo Chen <[email protected]>
The IMX93 SoC has a new ADC IP, so add binding documentation for NXP IMX93 ADC.
Signed-off-by Haibo Chen <[email protected]>--- .../bindings/iio/adc/nxp,imx93-adc.yaml | 79 +++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yamlDocumentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml new file +0
-0
This was already sent, so I am surprised to see this in worse or the same state. Don't force us to repeat review, it's a waste of time.
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml line 7
Quoted 8 lines
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml new file +7
-0@@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/nxp,imx93-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP iMX93 ADC bindings
Drop bindings. How did it appear here? It wasn't in v1.
Quoted 41 lines
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml new file +41
-0+ +maintainers: + - Haibo Chen <[email protected]> + +description: + The ADC on iMX93 is a 8-channel 12-bit 1MS/s ADC with 4 channels + connected to pins. it support normal and inject mode, include + One-Shot and Scan (continuous) conversions. Programmable DMA + enables for each channel Also this ADC contain alternate analog + watchdog thresholds, select threshold through input ports. And + also has Self-test logic and Software-initiated calibration. + +properties: + compatible: + const: nxp,imx93-adc + + reg: + maxItems: 1 + + interrupts: + description: + line 0 for WDGnL (watchdog threshold) interrupt requests. + line 1 for WDGnH (watchdog threshold) interrupt requests. + line 2 for normal conversion, include EOC (End of Conversion) + interrupt request, ECH (End of Chain) interrupt request, + JEOC (End of Injected Conversion mode) interrupt request + and JECH (End of injected Chain) interrupt request. + line 3 for Self-testing Interrupts. + maxItems: 4 + + clocks: + maxItems: 1 + + vref-supply: + description: + The reference voltage which used to establish channel scaling. + + "#io-channel-cells": + const: 1 + +required:
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml line 58
Quoted 10 lines
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml new file +10
-0+ - compatible + - reg + - interrupts + - clocks + - clock-names + - vref-supply + - "#io-channel-cells" + +additionalProperties: false +
Best regards,
Krzysztof
Bough Chen
maintainerRE: [PATCH v2 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
Quoted 26 lines
-----Original Message-----
From: Krzysztof Kozlowski <[email protected]>
Sent: 2022年12月15日 18:12
To: Bough Chen <[email protected]>; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]
Cc: [email protected]; dl-linux-imx <[email protected]>; [email protected]; [email protected]; [email protected]
Subject: Re: [PATCH v2 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADCQuoted 8 lines · On 14/12/2022 14:35, [email protected] wrote:
From: Haibo Chen <[email protected]>
The IMX93 SoC has a new ADC IP, so add binding documentation for NXP IMX93 ADC.
Signed-off-by Haibo Chen <[email protected]>--- .../bindings/iio/adc/nxp,imx93-adc.yaml | 79+++++++++++++++++++
Quoted 4 lines
1 file changed, 79 insertions(+) create mode 100644
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
Quoted 10 lines
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
Quoted 7 lines
diff --git
a/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yamlb/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yamlnew file mode 100644
index 000000000000..229bb79e255cDocumentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml new file +0
-0This was already sent, so I am surprised to see this in worse or the same state. Don't force us to repeat review, it's a waste of time.
Sorry, I'm focus on the driver side, will pay much attention on the yaml binding.
By the way, for your first review comments:
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
Quoted 6 lines
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml new file +6
-0+ + clocks: + maxItems: 1 + + clock-names: + const: ipg
No need for clock-names in such case.
How should I handle this case here? I search in this directory(iio/adc), and find many other yaml also write this way. Do you mean change like this:
clock-names: true
If you will, can you help tell where is the yaml guide, I'm not familiar with yaml rule.
Best Regards
Haibo Chen
Quoted 99 lines
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml line 4
Quoted 7 lines
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml new file +4
-0@@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 +--- +$id: +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi+cetree.org%2Fschemas%2Fiio%2Fadc%2Fnxp%2Cimx93-adc.yaml%23&da ta=0
Quoted 1 line
+5%7C01%7Chaibo.chen%40nxp.com%7C0f5dbde6e91b4c8f920c08dade84c2b4 %7C68
Quoted 1 line
+6ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C638066959030689942%7C Unknown
Quoted 1 line
+%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haW wiLC
Quoted 1 line
+JXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=iG7kL12EZ17jqPyLPx8X79 m8Muzaul
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
Quoted 4 lines
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml new file +3
-0+CZDuqAl8Ayhdw%3D&reserved=0 +$schema: +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi+cetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=05%7C01%7Chaib o.che
Quoted 1 line
+n%40nxp.com%7C0f5dbde6e91b4c8f920c08dade84c2b4%7C686ea1d3bc2b4c 6fa92c
Quoted 1 line
+d99c5c301635%7C0%7C0%7C638066959030689942%7CUnknown%7CTWFpb GZsb3d8eyJ
Quoted 1 line
+WIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7 C300
Quoted 1 line
+0%7C%7C%7C&sdata=fXkafmq9%2FLxo2I%2FyIFRcTgwVMLP7yBXYDPrn0 DJzuV4%
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml line 7
Quoted 3 lines
+3D&reserved=0
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml new file +2
-0+ +title: NXP iMX93 ADC bindingsDrop bindings. How did it appear here? It wasn't in v1.
Quoted 41 lines
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml new file +41
-0+ +maintainers: + - Haibo Chen <[email protected]> + +description: + The ADC on iMX93 is a 8-channel 12-bit 1MS/s ADC with 4 channels + connected to pins. it support normal and inject mode, include + One-Shot and Scan (continuous) conversions. Programmable DMA + enables for each channel Also this ADC contain alternate analog + watchdog thresholds, select threshold through input ports. And + also has Self-test logic and Software-initiated calibration. + +properties: + compatible: + const: nxp,imx93-adc + + reg: + maxItems: 1 + + interrupts: + description: + line 0 for WDGnL (watchdog threshold) interrupt requests. + line 1 for WDGnH (watchdog threshold) interrupt requests. + line 2 for normal conversion, include EOC (End of Conversion) + interrupt request, ECH (End of Chain) interrupt request, + JEOC (End of Injected Conversion mode) interrupt request + and JECH (End of injected Chain) interrupt request. + line 3 for Self-testing Interrupts. + maxItems: 4 + + clocks: + maxItems: 1 + + vref-supply: + description: + The reference voltage which used to establish channel scaling. + + "#io-channel-cells": + const: 1 + +required:Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml line 58
Quoted 10 lines
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml new file +10
-0+ - compatible + - reg + - interrupts + - clocks + - clock-names + - vref-supply + - "#io-channel-cells" + +additionalProperties: false +Best regards,
Krzysztof
Re: [PATCH v2 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
Quoted 41 lines · Bough Chen
Quoted 26 lines
-----Original Message-----
From: Krzysztof Kozlowski <[email protected]>
Sent: 2022年12月15日 18:12
To: Bough Chen <[email protected]>; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]
Cc: [email protected]; dl-linux-imx <[email protected]>; [email protected]; [email protected]; [email protected]
Subject: Re: [PATCH v2 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADCQuoted 8 lines · On 14/12/2022 14:35, [email protected] wrote:
From: Haibo Chen <[email protected]>
The IMX93 SoC has a new ADC IP, so add binding documentation for NXP IMX93 ADC.
Signed-off-by Haibo Chen <[email protected]>--- .../bindings/iio/adc/nxp,imx93-adc.yaml | 79+++++++++++++++++++
Quoted 4 lines
1 file changed, 79 insertions(+) create mode 100644
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yamlQuoted 10 lines
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
Quoted 7 lines
diff --git
a/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yamlb/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yamlnew file mode 100644
index 000000000000..229bb79e255cDocumentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml new file +0
-0This was already sent, so I am surprised to see this in worse or the same state. Don't force us to repeat review, it's a waste of time.
Sorry, I'm focus on the driver side, will pay much attention on the yaml binding.
By the way, for your first review comments:
Quoted 8 lines
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
Quoted 6 lines
Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml new file +6
-0+ + clocks: + maxItems: 1 + + clock-names: + const: ipgNo need for clock-names in such case.
I think this was for the other patch and recommendation was to drop entire clock-names. Here you do not have it, so no need to change this.
Best regards,
Krzysztof
[email protected]
maintainerPATCH v2 3/3 arm64: dts: imx93: add ADC support
In reply to [email protected]From: Haibo Chen <[email protected]>
Add ADC support for imx93-11x11-evk board.
--- arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts | 12 ++++++++++++ arch/arm64/boot/dts/freescale/imx93.dtsi | 12 ++++++++++++ 2 files changed, 24 insertions(+)
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts +12 -0
@@ -15,6 +15,13 @@ chosen { stdout-path = &lpuart1; }; + reg_vref_1v8: regulator-adc-vref { + compatible = "regulator-fixed"; + regulator-name = "vref_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; pinctrl-names = "default";
@@ -27,6 +34,11 @@ reg_usdhc2_vmmc: regulator-usdhc2 { }; }; +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + &mu1 { status = "okay"; };
arch/arm64/boot/dts/freescale/imx93.dtsi +12 -0
@@ -266,6 +266,18 @@ anatop: anatop@44480000 { compatible = "fsl,imx93-anatop", "syscon"; reg = <0x44480000 0x10000>; }; + + adc1: adc@44530000 { + compatible = "nxp,imx93-adc"; + reg = <0x44530000 0x10000>; + interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_ADC1_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; }; aips2: bus@42000000 {
Signature · 1 line
2.34.1