client/player: Add support for Metadata in BAP Profile
Luiz Augusto von Dentz
maintainerPATCH v3 1/4 client/player: Add support for Metadata in BAP Profile
From: Abhay Maheta <[email protected]>
This adds support for Metadata in BAP profile.
In order to register zero Metadata, 0 shall be
entered when prompted.
[bluetooth]# endpoint.register 00002bc9-0000-1000-8000-00805f9b34fb 0x06 [/local/endpoint/ep0] Enter Metadata (value/no): n [/local/endpoint/ep0] Auto Accept (yes/no): y [/local/endpoint/ep0] CIG (auto/value): a [/local/endpoint/ep0] CIS (auto/value): a
Capabilities:
03 01 ff 00 02 02 03 02 03 03 05 04 1e 00 f0 00 ................
Endpoint /local/endpoint/ep0 registered
--- client/player.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 85 insertions(+), 2 deletions(-)
client/player.c +85 -2
@@ -70,6 +70,7 @@ struct endpoint {uint16_t cid;uint16_t vid;struct iovec *caps; +struct iovec *meta;bool auto_accept;bool acquiring;uint8_t cig;
@@ -1582,6 +1583,7 @@ struct endpoint_config {GDBusProxy *proxy;struct endpoint *ep;struct iovec *caps; +struct iovec *meta;uint8_t target_latency;const struct codec_qos *qos; };
@@ -1592,6 +1594,7 @@ static void append_properties(DBusMessageIter *iter,DBusMessageIter dict;struct codec_qos *qos = (void *)cfg->qos;const char *key ="Capabilities" ; +const char *meta ="Metadata" ;dbus_message_iter_open_container (iter,DBUS_TYPE_ARRAY ,"{sv}" , &dict);
@@ -1602,6 +1605,15 @@ static void append_properties(DBusMessageIter *iter,DBUS_TYPE_BYTE , &cfg->caps->iov_base, cfg->caps->iov_len); +if (cfg->meta->iov_len) { +g_dbus_dict_append_basic_array (&dict,DBUS_TYPE_STRING , &meta, +DBUS_TYPE_BYTE , &cfg->meta->iov_base, + cfg->meta->iov_len); + +bt_shell_printf ("Metadata:\n" ); +bt_shell_hexdump (cfg->meta->iov_base, cfg->meta->iov_len); + } +if (!qos) goto done;
@@ -1699,6 +1711,9 @@ static DBusMessage *endpoint_select_properties_reply(struct endpoint *ep,iov_append (&cfg->caps, preset->data.iov_base, preset->data.iov_len); cfg->target_latency = preset->target_latency; +/* Copy metadata */ +iov_append (&cfg->meta, cfg->ep->meta->iov_base, cfg->ep->meta->iov_len); +if (preset->qos.phy)/* Set QoS parameters */ cfg->qos = &preset->qos;
@@ -1847,6 +1862,12 @@ static void endpoint_free(void *data)g_free (ep->caps); } +if (ep->meta) { +if (ep->meta->iov_base) +g_free (ep->meta->iov_base); +g_free (ep->meta); + } +if (ep->msg)dbus_message_unref (ep->msg);
@@ -1917,10 +1938,38 @@ static gboolean endpoint_vendor_exists(const GDBusPropertyTable *property,return ep->cid && ep->vid; } +static gboolean endpoint_get_metadata (const GDBusPropertyTable *property, +DBusMessageIter *iter,void *data) +{ +struct endpoint *ep = data; +DBusMessageIter array; + +dbus_message_iter_open_container (iter,DBUS_TYPE_ARRAY , +DBUS_TYPE_BYTE_AS_STRING , &array); + +dbus_message_iter_append_fixed_array (&array,DBUS_TYPE_BYTE , + &ep->meta->iov_base, + ep->meta->iov_len); + +dbus_message_iter_close_container (iter, &array); + +return TRUE; +} + +static gboolean endpoint_metadata_exists (const GDBusPropertyTable *property, +void *data) +{ +struct endpoint *ep = data; + +return ep->meta ? TRUE : FALSE; +} +static const GDBusPropertyTable endpoint_properties[] = { {"UUID" ,"s" , endpoint_get_uuid,NULL ,NULL }, {"Codec" ,"y" , endpoint_get_codec,NULL ,NULL }, {"Capabilities" ,"ay" , endpoint_get_capabilities,NULL ,NULL }, + {"Metadata" ,"ay" , endpoint_get_metadata,NULL , + endpoint_metadata_exists }, {"Vendor" ,"u" , endpoint_get_vendor,NULL , endpoint_vendor_exists }, { } };
@@ -1930,6 +1979,7 @@ static void register_endpoint_setup(DBusMessageIter *iter, void *user_data)struct endpoint *ep = user_data;DBusMessageIter dict;const char *key ="Capabilities" ; +const char *meta ="Metadata" ;dbus_message_iter_append_basic (iter,DBUS_TYPE_OBJECT_PATH , &ep->path);
@@ -1955,6 +2005,15 @@ static void register_endpoint_setup(DBusMessageIter *iter, void *user_data)bt_shell_hexdump (ep->caps->iov_base, ep->caps->iov_len); } +if (ep->meta) { +g_dbus_dict_append_basic_array (&dict,DBUS_TYPE_STRING , &meta, +DBUS_TYPE_BYTE , &ep->meta->iov_base, + ep->meta->iov_len); + +bt_shell_printf ("Metadata:\n" ); +bt_shell_hexdump (ep->meta->iov_base, ep->meta->iov_len); + } +dbus_message_iter_close_container (iter, &dict); }
@@ -2072,6 +2131,30 @@ static void endpoint_auto_accept(const char *input, void *user_data)bt_shell_prompt_input (ep->path,"CIG (auto/value):" , endpoint_cig, ep); } +static void endpoint_set_metadata (const char *input,void *user_data) +{ +struct endpoint *ep = user_data; + +if (!strcasecmp (input,"n" ) || !strcasecmp (input,"no" )) { +free (ep->meta->iov_base); + ep->meta =NULL ; + goto done; + } + +if (!ep->meta) + ep->meta = g_new0(struct iovec, 1); + + ep->meta->iov_base =str2bytearray ((char *) input, &ep->meta->iov_len); +if (!ep->meta->iov_base) { +free (ep->meta); + ep->meta =NULL ; + } + +done: +bt_shell_prompt_input (ep->path,"Auto Accept (yes/no):" , + endpoint_auto_accept, ep); +} +static void endpoint_set_capabilities (const char *input,void *user_data) {struct endpoint *ep = user_data;
@@ -2091,8 +2174,8 @@ static void endpoint_set_capabilities(const char *input, void *user_data) ep->caps->iov_len =0x00 ; } -bt_shell_prompt_input (ep->path,"Auto Accept (yes/no):" , - endpoint_auto_accept, ep); +bt_shell_prompt_input (ep->path,"Enter Metadata (value/no):" , + endpoint_set_metadata, ep); }static char *uuid_generator (const char *text,int state)
Signature · 1 line
2.40.0
Luiz Augusto von Dentz
maintainerPATCH v3 2/4 client/player: Fix crash when RegisterEndpoint fails
From: Luiz Augusto von Dentz <[email protected]>
If RegisterEndpoint fails when there are multiple adapters it would attempt to free the same endpoint multiple times.
--- client/player.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
client/player.c +4 -2
@@ -2028,9 +2028,11 @@ static void register_endpoint_reply(DBusMessage *message, void *user_data)bt_shell_printf ("Failed to register endpoint: %s\n" , error.name);dbus_error_free (&error); - local_endpoints =g_list_remove (local_endpoints, ep); -g_dbus_unregister_interface (dbus_conn, ep->path, +if (g_list_find (local_endpoints, ep)) { + local_endpoints =g_list_remove (local_endpoints, ep); +g_dbus_unregister_interface (dbus_conn, ep->path,BLUEZ_MEDIA_ENDPOINT_INTERFACE ); + }return bt_shell_noninteractive_quit (EXIT_FAILURE ); }
Signature · 1 line
2.40.0
Luiz Augusto von Dentz
maintainerPATCH v3 3/4 shared/shell: Fix not releasing prompt
In reply to Luiz Augusto von DentzFrom: Luiz Augusto von Dentz <[email protected]>
This fixes not releasing prompt when queueing a line to be executed since it can be considered as user input if the init script is attempting to enter it as response to prompt input.
--- src/shared/shell.c | 3 +++ 1 file changed, 3 insertions(+)
src/shared/shell.c +3 -0
@@ -1295,6 +1295,9 @@ static int bt_shell_queue_exec(char *line)/* Queue if already executing */ if (data.line) { +/* Check if prompt is being held then release using the line */ +if (!bt_shell_release_prompt (line)) +return 0 ;queue_push_tail (data.queue,strdup (line));return 0 ; }
Signature · 1 line
2.40.0
Luiz Augusto von Dentz
maintainerPATCH v3 4/4 shared/shell: Fix smatch warning
In reply to Luiz Augusto von DentzFrom: Luiz Augusto von Dentz <[email protected]>
This fixes the following warning:
src/shared/shell.c:615:21: warning: non-ANSI function declaration of function 'bt_shell_usage'
--- src/shared/shell.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
src/shared/shell.c +1 -1
@@ -612,7 +612,7 @@ void bt_shell_hexdump(const unsigned char *buf, size_t len)util_hexdump (' ' , buf, len, print_string,NULL ); } -void bt_shell_usage () +void bt_shell_usage (void ) {if (!data.exec)return ;
Signature · 1 line
2.40.0
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=744260
---Test result---
Test Summary:
CheckPatch FAIL 2.24 seconds GitLint PASS 1.13 seconds BuildEll PASS 37.12 seconds BluezMake PASS 1257.00 seconds MakeCheck PASS 13.05 seconds MakeDistcheck PASS 204.41 seconds CheckValgrind PASS 328.74 seconds CheckSmatch WARNING 455.54 seconds bluezmakeextell PASS 137.58 seconds IncrementalBuild PASS 4310.09 seconds ScanBuild PASS 1440.05 seconds
Details
##############################
Test: CheckPatch - FAIL
Desc: Run checkpatch.pl script
Output:
[BlueZ,v3,4/4] shared/shell: Fix smatch warning
WARNING:EMAIL_SUBJECT: A patch subject line should describe the change not the tool that found it #72:
Subject: [BlueZ PATCH v3 4/4] shared/shell: Fix smatch warning
/github/workspace/src/src/13228364.patch total: 0 errors, 1 warnings, 8 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
/github/workspace/src/src/13228364.patch has style problems, please review.
NOTE: Ignored message types: COMMIT_MESSAGE COMPLEX_MACRO CONST_STRUCT FILE_PATH_CHANGES MISSING_SIGN_OFF PREFER_PACKED SPDX_LICENSE_TAG SPLIT_STRING SSCANF_TO_KSTRTO
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
##############################
Test: CheckSmatch - WARNING
Desc: Run smatch tool with source
Output:src/shared/shell.c: note: in included file (through /usr/include/readline/readline.h):src/shared/shell.c: note: in included file (through /usr/include/readline/readline.h):src/shared/shell.c: note: in included file (through /usr/include/readline/readline.h):src/shared/shell.c: note: in included file (through /usr/include/readline/readline.h):src/shared/shell.c: note: in included file (through /usr/include/readline/readline.h):src/shared/shell.c: note: in included file (through /usr/include/readline/readline.h):
---
Regards,
Linux Bluetooth
This series was applied to bluetooth/bluez.git (master) by Luiz Augusto von Dentz <[email protected]>:
Hello:
This series was applied to bluetooth/bluez.git (master) by Luiz Augusto von Dentz <[email protected]>:
Quoted 15 lines · On Mon, 1 May 2023 15:44:07 -0700 you wrote:
From: Abhay Maheta <[email protected]>
This adds support for Metadata in BAP profile.
In order to register zero Metadata, 0 shall be
entered when prompted.[bluetooth]# endpoint.register 00002bc9-0000-1000-8000-00805f9b34fb
0x06[/local/endpoint/ep0] Enter Metadata (value/no): n [/local/endpoint/ep0] Auto Accept (yes/no): y [/local/endpoint/ep0] CIG (auto/value): a [/local/endpoint/ep0] CIS (auto/value): a
Capabilities:
03 01 ff 00 02 02 03 02 03 03 05 04 1e 00 f0 00 ................
Endpoint /local/endpoint/ep0 registered
Quoted 1 line
[...]
Here is the summary with links:
- [BlueZ,v3,1/4] client/player: Add support for Metadata in BAP Profile
https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=f9376b13b3fe - [BlueZ,v3,2/4] client/player: Fix crash when RegisterEndpoint fails https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=416b8375ffde - [BlueZ,v3,3/4] shared/shell: Fix not releasing prompt https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=0b88ee29ff1d - [BlueZ,v3,4/4] shared/shell: Fix smatch warning https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=3818b99c764e
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html