Skip to contentSkip to conversation

client/player: Add support for Metadata in BAP Profile

PATCH Superseded Luiz Augusto von Dentz 2 participants 4 messages May 1, 2023 Bluetooth drivers

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Luiz Augusto von Dentz

author maintainer
#0 lore raw

PATCH v2 1/3 client/player: Add support for Metadata in BAP Profile

From: Abhay Maheta <[email protected]>

This adds support for Metadata in BAP profile.
In order to register zero Metadata, 0 shall be
entered when prompted.

[bluetooth]# endpoint.register 00002bc9-0000-1000-8000-00805f9b34fb 0x06 [/local/endpoint/ep0] Enter Metadata (value/no): n [/local/endpoint/ep0] Auto Accept (yes/no): y [/local/endpoint/ep0] CIG (auto/value): a [/local/endpoint/ep0] CIS (auto/value): a
Capabilities:
03 01 ff 00 02 02 03 02 03 03 05 04 1e 00 f0 00 ................
Endpoint /local/endpoint/ep0 registered

---
 client/player.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 85 insertions(+), 2 deletions(-)
client/player.c +85 -2
index 5572cc566e79..cc35721d85b7 100644
@@ -70,6 +70,7 @@ struct endpoint {
 	uint16_t cid;
 	uint16_t vid;
 	struct iovec *caps;
+	struct iovec *meta;
 	bool auto_accept;
 	bool acquiring;
 	uint8_t cig;
@@ -1582,6 +1583,7 @@ struct endpoint_config {
 	GDBusProxy *proxy;
 	struct endpoint *ep;
 	struct iovec *caps;
+	struct iovec *meta;
 	uint8_t target_latency;
 	const struct codec_qos *qos;
 };
@@ -1592,6 +1594,7 @@ static void append_properties(DBusMessageIter *iter,
 	DBusMessageIter dict;
 	struct codec_qos *qos = (void *)cfg->qos;
 	const char *key = "Capabilities";
+	const char *meta = "Metadata";
 
 	dbus_message_iter_open_container(iter, DBUS_TYPE_ARRAY, "{sv}", &dict);
 
@@ -1602,6 +1605,15 @@ static void append_properties(DBusMessageIter *iter,
 					DBUS_TYPE_BYTE, &cfg->caps->iov_base,
 					cfg->caps->iov_len);
 
+	if (cfg->meta->iov_len) {
+		g_dbus_dict_append_basic_array(&dict, DBUS_TYPE_STRING, &meta,
+				DBUS_TYPE_BYTE, &cfg->meta->iov_base,
+				cfg->meta->iov_len);
+
+		bt_shell_printf("Metadata:\n");
+		bt_shell_hexdump(cfg->meta->iov_base, cfg->meta->iov_len);
+	}
+
 	if (!qos)
 		goto done;
 
@@ -1699,6 +1711,9 @@ static DBusMessage *endpoint_select_properties_reply(struct endpoint *ep,
 	iov_append(&cfg->caps, preset->data.iov_base, preset->data.iov_len);
 	cfg->target_latency = preset->target_latency;
 
+	/* Copy metadata */
+	iov_append(&cfg->meta, cfg->ep->meta->iov_base, cfg->ep->meta->iov_len);
+
 	if (preset->qos.phy)
 		/* Set QoS parameters */
 		cfg->qos = &preset->qos;
@@ -1847,6 +1862,12 @@ static void endpoint_free(void *data)
 		g_free(ep->caps);
 	}
 
+	if (ep->meta) {
+		if (ep->meta->iov_base)
+			g_free(ep->meta->iov_base);
+		g_free(ep->meta);
+	}
+
 	if (ep->msg)
 		dbus_message_unref(ep->msg);
 
@@ -1917,10 +1938,38 @@ static gboolean endpoint_vendor_exists(const GDBusPropertyTable *property,
 	return ep->cid && ep->vid;
 }
 
+static gboolean endpoint_get_metadata(const GDBusPropertyTable *property,
+					DBusMessageIter *iter, void *data)
+{
+	struct endpoint *ep = data;
+	DBusMessageIter array;
+
+	dbus_message_iter_open_container(iter, DBUS_TYPE_ARRAY,
+				DBUS_TYPE_BYTE_AS_STRING, &array);
+
+	dbus_message_iter_append_fixed_array(&array, DBUS_TYPE_BYTE,
+				&ep->meta->iov_base,
+				ep->meta->iov_len);
+
+	dbus_message_iter_close_container(iter, &array);
+
+	return TRUE;
+}
+
+static gboolean endpoint_metadata_exists(const GDBusPropertyTable *property,
+							void *data)
+{
+	struct endpoint *ep = data;
+
+	return ep->meta ? TRUE : FALSE;
+}
+
 static const GDBusPropertyTable endpoint_properties[] = {
 	{ "UUID", "s", endpoint_get_uuid, NULL, NULL },
 	{ "Codec", "y", endpoint_get_codec, NULL, NULL },
 	{ "Capabilities", "ay", endpoint_get_capabilities, NULL, NULL },
+	{ "Metadata", "ay", endpoint_get_metadata, NULL,
+				endpoint_metadata_exists },
 	{ "Vendor", "u", endpoint_get_vendor, NULL, endpoint_vendor_exists },
 	{ }
 };
@@ -1930,6 +1979,7 @@ static void register_endpoint_setup(DBusMessageIter *iter, void *user_data)
 	struct endpoint *ep = user_data;
 	DBusMessageIter dict;
 	const char *key = "Capabilities";
+	const char *meta = "Metadata";
 
 	dbus_message_iter_append_basic(iter, DBUS_TYPE_OBJECT_PATH, &ep->path);
 
@@ -1955,6 +2005,15 @@ static void register_endpoint_setup(DBusMessageIter *iter, void *user_data)
 		bt_shell_hexdump(ep->caps->iov_base, ep->caps->iov_len);
 	}
 
+	if (ep->meta) {
+		g_dbus_dict_append_basic_array(&dict, DBUS_TYPE_STRING, &meta,
+				DBUS_TYPE_BYTE, &ep->meta->iov_base,
+				ep->meta->iov_len);
+
+		bt_shell_printf("Metadata:\n");
+		bt_shell_hexdump(ep->meta->iov_base, ep->meta->iov_len);
+	}
+
 	dbus_message_iter_close_container(iter, &dict);
 }
 
@@ -2072,6 +2131,30 @@ static void endpoint_auto_accept(const char *input, void *user_data)
 	bt_shell_prompt_input(ep->path, "CIG (auto/value):", endpoint_cig, ep);
 }
 
+static void endpoint_set_metadata(const char *input, void *user_data)
+{
+	struct endpoint *ep = user_data;
+
+	if (!strcasecmp(input, "n") || !strcasecmp(input, "no")) {
+		free(ep->meta->iov_base);
+		ep->meta = NULL;
+		goto done;
+	}
+
+	if (!ep->meta)
+		ep->meta = g_new0(struct iovec, 1);
+
+	ep->meta->iov_base = str2bytearray((char *) input, &ep->meta->iov_len);
+	if (!ep->meta->iov_base) {
+		free(ep->meta);
+		ep->meta = NULL;
+	}
+
+done:
+	bt_shell_prompt_input(ep->path, "Auto Accept (yes/no):",
+					endpoint_auto_accept, ep);
+}
+
 static void endpoint_set_capabilities(const char *input, void *user_data)
 {
 	struct endpoint *ep = user_data;
@@ -2091,8 +2174,8 @@ static void endpoint_set_capabilities(const char *input, void *user_data)
 		ep->caps->iov_len = 0x00;
 	}
 
-	bt_shell_prompt_input(ep->path, "Auto Accept (yes/no):",
-						endpoint_auto_accept, ep);
+	bt_shell_prompt_input(ep->path, "Enter Metadata (value/no):",
+					endpoint_set_metadata, ep);
 }
 
 static char *uuid_generator(const char *text, int state)
Signature · 1 line
2.40.0
author maintainer
#1 lore raw

PATCH v2 2/3 client/player: Fix crash when RegisterEndpoint fails

From: Luiz Augusto von Dentz <[email protected]>

If RegisterEndpoint fails when there are multiple adapters it would attempt to free the same endpoint multiple times.

---
 client/player.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
client/player.c +4 -2
index cc35721d85b7..7719076c8cfa 100644
@@ -2028,9 +2028,11 @@ static void register_endpoint_reply(DBusMessage *message, void *user_data)
 		bt_shell_printf("Failed to register endpoint: %s\n",
 				error.name);
 		dbus_error_free(&error);
-		local_endpoints = g_list_remove(local_endpoints, ep);
-		g_dbus_unregister_interface(dbus_conn, ep->path,
+		if (g_list_find(local_endpoints, ep)) {
+			local_endpoints = g_list_remove(local_endpoints, ep);
+			g_dbus_unregister_interface(dbus_conn, ep->path,
 						BLUEZ_MEDIA_ENDPOINT_INTERFACE);
+		}
 		return bt_shell_noninteractive_quit(EXIT_FAILURE);
 	}
 
Signature · 1 line
2.40.0
author maintainer
#2 lore raw

PATCH v2 3/3 shared/shell: Fix not releasing prompt

In reply to Luiz Augusto von Dentz

From: Luiz Augusto von Dentz <[email protected]>

This fixes not releasing prompt when queueing a line to be executed since it can be considered as user input if the init script is attempting to enter it as response to prompt input.

---
 src/shared/shell.c | 3 +++
 1 file changed, 3 insertions(+)
src/shared/shell.c +3 -0
index 8b8b253d0bcf..757e16199ddf 100644
@@ -1295,6 +1295,9 @@ static int bt_shell_queue_exec(char *line)
 
 	/* Queue if already executing */
 	if (data.line) {
+		/* Check if prompt is being held then release using the line */
+		if (!bt_shell_release_prompt(line))
+			return 0;
 		queue_push_tail(data.queue, strdup(line));
 		return 0;
 	}
Signature · 1 line
2.40.0
#3 lore raw
In reply to Luiz Augusto von Dentz

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=744240

---Test result---

Test Summary:

CheckPatch                    PASS      1.58 seconds
GitLint                       PASS      0.96 seconds
BuildEll                      PASS      33.01 seconds
BluezMake                     PASS      1007.30 seconds
MakeCheck                     PASS      12.82 seconds
MakeDistcheck                 PASS      180.90 seconds
CheckValgrind                 PASS      297.29 seconds
CheckSmatch                   WARNING   399.65 seconds
bluezmakeextell               PASS      121.85 seconds
IncrementalBuild              PASS      2468.53 seconds
ScanBuild                     PASS      1234.32 seconds

Details
##############################
Test: CheckSmatch - WARNING
Desc: Run smatch tool with source
Output:
src/shared/shell.c: note: in included file (through /usr/include/readline/readline.h):src/shared/shell.c:615:21: warning: non-ANSI function declaration of function 'bt_shell_usage'src/shared/shell.c: note: in included file (through /usr/include/readline/readline.h):src/shared/shell.c:615:21: warning: non-ANSI function declaration of function 'bt_shell_usage'src/shared/shell.c: note: in included file (through /usr/include/readline/readline.h):src/shared/shell.c:615:21: warning: non-ANSI function declaration of function 'bt_shell_usage'

---
Regards,
Linux Bluetooth