How can I build a 2.4 kernel on a 2.6 System
Hello list
I will build some 2.4 kernel modules on a system with a running 2.6 kernel.
Is it possible and how can I do this?
Thanks for reply
Hi,
Quoted 5 lines · On Fri, Oct 24, 2008 at 02:16:40PM +0200, [email protected] wrote:
Hello list
I will build some 2.4 kernel modules on a system with a running 2.6 kernel.
Is it possible and how can I do this?
Not sure what you really mean. If you mean build 2.4 modules for 2.4 on a machine running 2.6, that's OK as there's no dependency between the running kernel and the one you're building. However, you should be careful about two things :
- gcc: it tends to be too recent for 2.4. gcc 4.1 is the highest version supported.
- modutils: most recent distros only ship module-init-tools without the old depmod. If you intend to "make modules_install INSTALL_MOD_PATH=..." then get prepared to see some errors from depmod at the end. The easiest solution consists in getting a depmod from an old machine an installing it in /tmp for instance.
Hoping this helps,
Willy
Hello Willy
Thanks for answering, but I have a problem with the compiling. When I try to compile the 2.4 kernel with the following commands:
# make clean && make mrproper then I restore the .config file # make oldconfig # make dep && make bzImage respectively make modules
I get the following error message:
make[1]: Leaving directory `/fileserver/99_Frei/kernel-build-tree/linux-2.4.21-57.EL'
gcc -D__KERNEL__ -I/fileserver/99_Frei/kernel-build-tree/linux-2.4.21-57.EL/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common
-Wno-unused -fomit-frame-pointer -pipe -freorder-blocks -march=i386 -DKBUILD_BASENAME=main
-c -o init/main.o init/main.cinit/main.c:1: Fehler: Die ausgewählte CPU unterstützt nicht den x86-64 Befehlssatz
English translation (by google)
init / main.c: 1: Error: The selected CPU does not support x86-64 instruction
I use a x86_64 system with a 2.6.16.60-0.31-smp kernel for compiling 2.4 kernel modules.
I think some compiler information are missing for make.
Could you help me?
----- Original Message ----- From: "Willy Tarreau" <[email protected]>
To: <[email protected]>
Cc: <[email protected]>
Sent: Friday, October 24, 2008 9:29 PM
Subject: Re: How can I build a 2.4 kernel on a 2.6 System
Quoted 32 lines
Hi,
Quoted 5 lines · On Fri, Oct 24, 2008 at 02:16:40PM +0200, [email protected] wrote:
Hello list
I will build some 2.4 kernel modules on a system with a running 2.6 kernel.
Is it possible and how can I do this?
Not sure what you really mean. If you mean build 2.4 modules for 2.4 on a machine running 2.6, that's OK as there's no dependency between the running kernel and the one you're building. However, you should be careful about two things :
- gcc: it tends to be too recent for 2.4. gcc 4.1 is the highest version supported.
- modutils: most recent distros only ship module-init-tools without the old depmod. If you intend to "makemodules_install
INSTALL_MOD_PATH=..."
then get prepared to see some errors from depmod at the end. The
easiest
solution consists in getting a depmod from an old machine an installing it in /tmp for instance.Hoping this helps,
Willy--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 11 lines · Jörg Dohle
Hello Willy
Thanks for answering, but I have a problem with the compiling. When I try to compile the 2.4 kernel with the following commands:
# make clean && make mrproper then I restore the .config file # make oldconfig # make dep && make bzImage respectively make modules
Quoted 4 lines
I get the following error message:
make[1]: Leaving directory `/fileserver/99_Frei/kernel-build-tree/linux-2.4.21-57.EL'
OK, first it's an RHEL3 kernel, not a mainline one. The difference can sometimes be important.
Quoted 11 lines
gcc -D__KERNEL__
(quoted diff) +0
-2-I/fileserver/99_Frei/kernel-build-tree/linux-2.4.21-57.EL/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -Wno-unused -fomit-frame-pointer -pipe -freorder-blocks -march=i386 -DKBUILD_BASENAME=main -c -o init/main.o init/main.c
init/main.c:1: Fehler: Die ausgewählte CPU unterstützt nicht den x86-64 BefehlssatzEnglish translation (by google)
init /main.c: 1: Error: The selected CPU does not support x86-64 instruction
You might get native error messages by doing "export LANG=C" before building. I think that the problem you're encountering is simply because by default you're trying to build for a different architecture.
You should try appending "ARCH=i386" to all your make commands :
# make oldconfig ARCH=i386 # make dep ARCH=i386 && make bzImage ARCH=i386 # make modules ARCH=i386
It should theorically work, but since this is not used very often, it is possible that you still get minor trouble.
Regards,
Willy