dt-bindings: vendor-prefixes: add ShenZhen New Display Co.
Subsystems (4)
PATCH v2 1/3 dt-bindings: vendor-prefixes: add ShenZhen New Display Co.
ShenZhen New Display Co., Limited is the manufacturer of the NDS040480800-V3 LCD panel according the datasheet.
---
Changes in v2: none
--- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -929,6 +929,8 @@ patternProperties: description: Netronix, Inc. "^netxeon,.*": description: Shenzhen Netxeon Technology CO., LTD + "^newdisplay,.*": + description: ShenZhen New Display Co., Limited "^neweast,.*": description: Guangdong Neweast Optoelectronics CO., LTD "^newhaven,.*":
Signature · 1 line
2.34.1
PATCH v2 2/3 dt-bindings: display: panel: Add panels based on ILITEK ILI9806E
Add bindings for LCD panels based on the ILITEK ILI9806E RGB controller connected over SPI and the "ShenZhen New Display Co NDS040480800-V3" 480x800 panel based on it.
---
Changes in v2:
- remove T: line form MAINTAINERS entry
- reference spi-peripheral-props.yaml
- add 'maxItems: 1' to reg
- use unevaluatedProperties
- remove out of scope backlight node
--- .../display/panel/ilitek,ili9806e.yaml | 63 +++++++++++++++++++ MAINTAINERS | 5 ++ 2 files changed, 68 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml new file +63 -0
@@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9806e.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI9806E display panels + +maintainers: + - Luca Ceresoli <[email protected]> + +description: + This binding is for display panels using an Ilitek ILI9806E controller in + SPI mode. + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + items: + - enum: + # ShenZhen New Display Co 3.97" 480x800 RGB a-SI TFT LCD + - newdisplay,nds040480800-v3 + - const: ilitek,ili9806e + + reg: + maxItems: 1 + +required: + - compatible + - reg + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + display@0 { + compatible = "newdisplay,nds040480800-v3", "ilitek,ili9806e"; + reg = <0>; + spi-max-frequency = <1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdgpios>; + reset-gpios = <&gpio 26 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + + port { + ili9806e_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; + }; + }; + +...
MAINTAINERS +5 -0
@@ -6516,6 +6516,11 @@ T: git git://anongit.freedesktop.org/drm/drm-misc F: Documentation/devicetree/bindings/display/ilitek,ili9486.yaml F: drivers/gpu/drm/tiny/ili9486.c +DRM DRIVER FOR ILITEK ILI9806E PANELS +M: Luca Ceresoli <[email protected]> +S: Maintained +F: Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml + DRM DRIVER FOR JADARD JD9365DA-H3 MIPI-DSI LCD PANELS M: Jagan Teki <[email protected]> S: Maintained
Signature · 1 line
2.34.1
Rob Herring
maintainerRe: [PATCH v2 2/3] dt-bindings: display: panel: Add panels based on ILITEK ILI9806E
Quoted 14 lines · Luca Ceresoli
Add bindings for LCD panels based on the ILITEK ILI9806E RGB controller connected over SPI and the "ShenZhen New Display Co NDS040480800-V3" 480x800 panel based on it.
Signed-off-by Luca Ceresoli <[email protected]>---
Changes in v2:
- remove T: line formMAINTAINERSentry
- referencespi-peripheral-props.yaml
- add 'maxItems: 1' to reg
- use unevaluatedProperties
- remove out of scope backlight node
Quoted 6 lines
--- .../display/panel/ilitek,ili9806e.yaml | 63 +++++++++++++++++++ MAINTAINERS | 5 ++ 2 files changed, 68 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
Re: [PATCH v2 2/3] dt-bindings: display: panel: Add panels based on ILITEK ILI9806E
In reply to Luca CeresoliQuoted 14 lines · Luca Ceresoli
Add bindings for LCD panels based on the ILITEK ILI9806E RGB controller connected over SPI and the "ShenZhen New Display Co NDS040480800-V3" 480x800 panel based on it.
Signed-off-by Luca Ceresoli <[email protected]>---
Changes in v2:
- remove T: line formMAINTAINERSentry
- referencespi-peripheral-props.yaml
- add 'maxItems: 1' to reg
- use unevaluatedProperties
- remove out of scope backlight node
Quoted 6 lines
--- .../display/panel/ilitek,ili9806e.yaml | 63 +++++++++++++++++++ MAINTAINERS | 5 ++ 2 files changed, 68 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
PATCH v2 3/3 DRM: panel: add Ilitek ILI9806E driver
In reply to Luca CeresoliAdd a driver for the ILITEK ILI9806E 480x864 RGB LCD controller connected over SPI, and implement the ShenZhen New Display Co NDS040480800-V3 480x800 panel.
---
Changes in v2:
- add ILI9806E_P1_DISCTRL1 bit description
--- MAINTAINERS | 1 + drivers/gpu/drm/panel/Kconfig | 13 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-ilitek-ili9806e.c | 385 ++++++++++++++++++ 4 files changed, 400 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9806e.c
MAINTAINERS +1 -0
@@ -6520,6 +6520,7 @@ DRM DRIVER FOR ILITEK ILI9806E PANELS M: Luca Ceresoli <[email protected]> S: Maintained F: Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml +F: drivers/gpu/drm/panel/panel-ilitek-ili9806e.c DRM DRIVER FOR JADARD JD9365DA-H3 MIPI-DSI LCD PANELS M: Jagan Teki <[email protected]>
drivers/gpu/drm/panel/Kconfig +13 -0
@@ -194,6 +194,19 @@ config DRM_PANEL_ILITEK_ILI9341 QVGA (240x320) RGB panels. support serial & parallel rgb interface. +config DRM_PANEL_ILITEK_ILI9806E + tristate "Ilitek ILI9806E panel" + depends on OF + depends on BACKLIGHT_CLASS_DEVICE + select VIDEOMODE_HELPERS + select DRM_MIPI_DBI + help + Say Y here if you want to enable support for LCD panels connected + over SPI and based on the Ilitek ILI9806E controller. + + The ILI9806E is an LCD controller capable of driving 18-bit a-Si + TFT LCDs up to a resolution of 480x800. + config DRM_PANEL_ILITEK_ILI9881C tristate "Ilitek ILI9881C-based panels" depends on OF
drivers/gpu/drm/panel/Makefile +1 -0
@@ -17,6 +17,7 @@ obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d obj-$(CONFIG_DRM_PANEL_HIMAX_HX8394) += panel-himax-hx8394.o obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9341) += panel-ilitek-ili9341.o +obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9806E) += panel-ilitek-ili9806e.o obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o obj-$(CONFIG_DRM_PANEL_INNOLUX_EJ030NA) += panel-innolux-ej030na.o obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
drivers/gpu/drm/panel/panel-ilitek-ili9806e.c new file +385 -0
385 lines not on this page · raw message
Signature · 1 line
2.34.1
Rob Herring
maintainerQuoted 12 lines · Luca Ceresoli
ShenZhen New Display Co., Limited is the manufacturer of the NDS040480800-V3 LCD panel according the datasheet.
Signed-off-by Luca Ceresoli <[email protected]>---
Changes in v2: none
--- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
Quoted 4 lines · Luca Ceresoli
ShenZhen New Display Co., Limited is the manufacturer of the NDS040480800-V3 LCD panel according the datasheet.
Signed-off-by Luca Ceresoli <[email protected]>
Quoted 12 lines · Luca Ceresoli
ShenZhen New Display Co., Limited is the manufacturer of the NDS040480800-V3 LCD panel according the datasheet.
Signed-off-by Luca Ceresoli <[email protected]>---
Changes in v2: none
--- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)