Skip to contentSkip to conversation

virtio-net: support dynamic coalescing moderation

PATCH Applied Heng Qi 2 participants 6 messages Dec 11, 2023 – Dec 13, 2023

Subsystems (4)
lore
Share & tools
lore

Heng Qi

author
#0 lore raw

v8 cover virtio-net: support dynamic coalescing moderation

Now, virtio-net already supports per-queue moderation parameter setting. Based on this, we use the linux dimlib to support dynamic coalescing moderation for virtio-net.

Due to some scheduling issues, we only support and test the rx dim.

Some test results:

I. Sockperf UDP
=================================================
1. Env
rxq_0 with affinity to cpu_0.

2. Cmd
client: taskset -c 0 sockperf tp -p 8989 -i $IP -t 10 -m 16B
server: taskset -c 0 sockperf sr -p 8989

3. Result

dim off: 1143277.00 rxpps, throughput 17.844 MBps, cpu is 100%.
dim on:  1124161.00 rxpps, throughput 17.610 MBps, cpu is 83.5%.

=================================================

II. Redis
=================================================
1. Env
There are 8 rxqs, and rxq_i with affinity to cpu_i.

2. Result
When all cpus are 100%, ops/sec of memtier_benchmark client is

dim off:  978437.23
dim on:  1143638.28

=================================================

III. Nginx
=================================================
1. Env
There are 8 rxqs and rxq_i with affinity to cpu_i.

2. Result
When all cpus are 100%, requests/sec of wrk client is

dim off:  877931.67
dim on:  1019160.31

=================================================

IV. Latency of sockperf udp
=================================================
1. Rx cmd
taskset -c 0 sockperf sr -p 8989

2. Tx cmd
taskset -c 0 sockperf pp -i ${ip} -p 8989 -t 10

After running this cmd 5 times and averaging the results,

3. Result

dim off: 17.7735 usec
dim on:  18.0110 usec

=================================================

Changelog:
v7->v8:
- Add select DIMLIB.

v6->v7:
- Drop the patch titled "spin lock for ctrl cmd access"
- Use rtnl_trylock to avoid the deadlock.

v5->v6:
- Add patch(4/5): spin lock for ctrl cmd access
- Patch(5/5):
- Use spin lock and cancel_work_sync to synchronize

v4->v5:
- Patch(4/4):
- Fix possible synchronization issues with cancel_work_sync.
- Reduce if/else nesting levels

v3->v4:
- Patch(5/5): drop.

v2->v3:
- Patch(4/5): some minor modifications.

v1->v2:
- Patch(2/5): a minor fix.
- Patch(4/5):
- improve the judgment of dim switch conditions.
- Cancel the work when vq reset.
- Patch(5/5): drop the tx dim implementation.

Heng Qi (4):
virtio-net: returns whether napi is complete
virtio-net: separate rx/tx coalescing moderation cmds
virtio-net: extract virtqueue coalescig cmd for reuse
virtio-net: support rx netdim

 drivers/net/Kconfig      |   1 +
 drivers/net/virtio_net.c | 297 ++++++++++++++++++++++++++++++++-------
 2 files changed, 249 insertions(+), 49 deletions(-)
Signature · 1 line
2.19.1.6.gb485710b
author
#1 lore raw

PATCH v8 1/4 virtio-net: returns whether napi is complete

rx netdim needs to count the traffic during a complete napi process, and start updating and comparing samples to make decisions after the napi ends. Let virtqueue_napi_complete() return true if napi is done, otherwise vice versa.

---
 drivers/net/virtio_net.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/net/virtio_net.c +5 -1
index d16f592c2061..0ad2894e6a5e 100644
@@ -431,7 +431,7 @@ static void virtqueue_napi_schedule(struct napi_struct *napi,
 	}
 }
 
-static void virtqueue_napi_complete(struct napi_struct *napi,
+static bool virtqueue_napi_complete(struct napi_struct *napi,
 				    struct virtqueue *vq, int processed)
 {
 	int opaque;
@@ -440,9 +440,13 @@ static void virtqueue_napi_complete(struct napi_struct *napi,
 	if (napi_complete_done(napi, processed)) {
 		if (unlikely(virtqueue_poll(vq, opaque)))
 			virtqueue_napi_schedule(napi, vq);
+		else
+			return true;
 	} else {
 		virtqueue_disable_cb(vq);
 	}
+
+	return false;
 }
 
 static void skb_xmit_done(struct virtqueue *vq)
Signature · 1 line
2.19.1.6.gb485710b
author
#2 lore raw

PATCH v8 2/4 virtio-net: separate rx/tx coalescing moderation cmds

In reply to Heng Qi

This patch separates the rx and tx global coalescing moderation commands to support netdim switches in subsequent patches.

---
 drivers/net/virtio_net.c | 31 ++++++++++++++++++++++++++++---
 1 file changed, 28 insertions(+), 3 deletions(-)
drivers/net/virtio_net.c +28 -3
index 0ad2894e6a5e..0285301caf78 100644
@@ -3266,10 +3266,10 @@ static int virtnet_get_link_ksettings(struct net_device *dev,
 	return 0;
 }
 
-static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi,
-				       struct ethtool_coalesce *ec)
+static int virtnet_send_tx_notf_coal_cmds(struct virtnet_info *vi,
+					  struct ethtool_coalesce *ec)
 {
-	struct scatterlist sgs_tx, sgs_rx;
+	struct scatterlist sgs_tx;
 	int i;
 
 	vi->ctrl->coal_tx.tx_usecs = cpu_to_le32(ec->tx_coalesce_usecs);
@@ -3289,6 +3289,15 @@ static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi,
 		vi->sq[i].intr_coal.max_packets = ec->tx_max_coalesced_frames;
 	}
 
+	return 0;
+}
+
+static int virtnet_send_rx_notf_coal_cmds(struct virtnet_info *vi,
+					  struct ethtool_coalesce *ec)
+{
+	struct scatterlist sgs_rx;
+	int i;
+
 	vi->ctrl->coal_rx.rx_usecs = cpu_to_le32(ec->rx_coalesce_usecs);
 	vi->ctrl->coal_rx.rx_max_packets = cpu_to_le32(ec->rx_max_coalesced_frames);
 	sg_init_one(&sgs_rx, &vi->ctrl->coal_rx, sizeof(vi->ctrl->coal_rx));
@@ -3309,6 +3318,22 @@ static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi,
 	return 0;
 }
 
+static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi,
+				       struct ethtool_coalesce *ec)
+{
+	int err;
+
+	err = virtnet_send_tx_notf_coal_cmds(vi, ec);
+	if (err)
+		return err;
+
+	err = virtnet_send_rx_notf_coal_cmds(vi, ec);
+	if (err)
+		return err;
+
+	return 0;
+}
+
 static int virtnet_send_ctrl_coal_vq_cmd(struct virtnet_info *vi,
 					 u16 vqn, u32 max_usecs, u32 max_packets)
 {
Signature · 1 line
2.19.1.6.gb485710b
author
#3 lore raw

PATCH v8 3/4 virtio-net: extract virtqueue coalescig cmd for reuse

In reply to Heng Qi

Extract commands to set virtqueue coalescing parameters for reuse by ethtool -Q, vq resize and netdim.

---
 drivers/net/virtio_net.c | 106 +++++++++++++++++++++++----------------
 1 file changed, 64 insertions(+), 42 deletions(-)
drivers/net/virtio_net.c +64 -42
index 0285301caf78..69fe09e99b3c 100644
@@ -2849,6 +2849,58 @@ static void virtnet_cpu_notif_remove(struct virtnet_info *vi)
 					    &vi->node_dead);
 }
 
+static int virtnet_send_ctrl_coal_vq_cmd(struct virtnet_info *vi,
+					 u16 vqn, u32 max_usecs, u32 max_packets)
+{
+	struct scatterlist sgs;
+
+	vi->ctrl->coal_vq.vqn = cpu_to_le16(vqn);
+	vi->ctrl->coal_vq.coal.max_usecs = cpu_to_le32(max_usecs);
+	vi->ctrl->coal_vq.coal.max_packets = cpu_to_le32(max_packets);
+	sg_init_one(&sgs, &vi->ctrl->coal_vq, sizeof(vi->ctrl->coal_vq));
+
+	if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_NOTF_COAL,
+				  VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET,
+				  &sgs))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int virtnet_send_rx_ctrl_coal_vq_cmd(struct virtnet_info *vi,
+					    u16 queue, u32 max_usecs,
+					    u32 max_packets)
+{
+	int err;
+
+	err = virtnet_send_ctrl_coal_vq_cmd(vi, rxq2vq(queue),
+					    max_usecs, max_packets);
+	if (err)
+		return err;
+
+	vi->rq[queue].intr_coal.max_usecs = max_usecs;
+	vi->rq[queue].intr_coal.max_packets = max_packets;
+
+	return 0;
+}
+
+static int virtnet_send_tx_ctrl_coal_vq_cmd(struct virtnet_info *vi,
+					    u16 queue, u32 max_usecs,
+					    u32 max_packets)
+{
+	int err;
+
+	err = virtnet_send_ctrl_coal_vq_cmd(vi, txq2vq(queue),
+					    max_usecs, max_packets);
+	if (err)
+		return err;
+
+	vi->sq[queue].intr_coal.max_usecs = max_usecs;
+	vi->sq[queue].intr_coal.max_packets = max_packets;
+
+	return 0;
+}
+
 static void virtnet_get_ringparam(struct net_device *dev,
 				  struct ethtool_ringparam *ring,
 				  struct kernel_ethtool_ringparam *kernel_ring,
@@ -2906,14 +2958,11 @@ static int virtnet_set_ringparam(struct net_device *dev,
 			 * through the VIRTIO_NET_CTRL_NOTF_COAL_TX_SET command, or, if the driver
 			 * did not set any TX coalescing parameters, to 0.
 			 */
-			err = virtnet_send_ctrl_coal_vq_cmd(vi, txq2vq(i),
-							    vi->intr_coal_tx.max_usecs,
-							    vi->intr_coal_tx.max_packets);
+			err = virtnet_send_tx_ctrl_coal_vq_cmd(vi, i,
+							       vi->intr_coal_tx.max_usecs,
+							       vi->intr_coal_tx.max_packets);
 			if (err)
 				return err;
-
-			vi->sq[i].intr_coal.max_usecs = vi->intr_coal_tx.max_usecs;
-			vi->sq[i].intr_coal.max_packets = vi->intr_coal_tx.max_packets;
 		}
 
 		if (ring->rx_pending != rx_pending) {
@@ -2922,14 +2971,11 @@ static int virtnet_set_ringparam(struct net_device *dev,
 				return err;
 
 			/* The reason is same as the transmit virtqueue reset */
-			err = virtnet_send_ctrl_coal_vq_cmd(vi, rxq2vq(i),
-							    vi->intr_coal_rx.max_usecs,
-							    vi->intr_coal_rx.max_packets);
+			err = virtnet_send_rx_ctrl_coal_vq_cmd(vi, i,
+							       vi->intr_coal_rx.max_usecs,
+							       vi->intr_coal_rx.max_packets);
 			if (err)
 				return err;
-
-			vi->rq[i].intr_coal.max_usecs = vi->intr_coal_rx.max_usecs;
-			vi->rq[i].intr_coal.max_packets = vi->intr_coal_rx.max_packets;
 		}
 	}
 
@@ -3334,48 +3380,24 @@ static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi,
 	return 0;
 }
 
-static int virtnet_send_ctrl_coal_vq_cmd(struct virtnet_info *vi,
-					 u16 vqn, u32 max_usecs, u32 max_packets)
-{
-	struct scatterlist sgs;
-
-	vi->ctrl->coal_vq.vqn = cpu_to_le16(vqn);
-	vi->ctrl->coal_vq.coal.max_usecs = cpu_to_le32(max_usecs);
-	vi->ctrl->coal_vq.coal.max_packets = cpu_to_le32(max_packets);
-	sg_init_one(&sgs, &vi->ctrl->coal_vq, sizeof(vi->ctrl->coal_vq));
-
-	if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_NOTF_COAL,
-				  VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET,
-				  &sgs))
-		return -EINVAL;
-
-	return 0;
-}
-
 static int virtnet_send_notf_coal_vq_cmds(struct virtnet_info *vi,
 					  struct ethtool_coalesce *ec,
 					  u16 queue)
 {
 	int err;
 
-	err = virtnet_send_ctrl_coal_vq_cmd(vi, rxq2vq(queue),
-					    ec->rx_coalesce_usecs,
-					    ec->rx_max_coalesced_frames);
+	err = virtnet_send_rx_ctrl_coal_vq_cmd(vi, queue,
+					       ec->rx_coalesce_usecs,
+					       ec->rx_max_coalesced_frames);
 	if (err)
 		return err;
 
-	vi->rq[queue].intr_coal.max_usecs = ec->rx_coalesce_usecs;
-	vi->rq[queue].intr_coal.max_packets = ec->rx_max_coalesced_frames;
-
-	err = virtnet_send_ctrl_coal_vq_cmd(vi, txq2vq(queue),
-					    ec->tx_coalesce_usecs,
-					    ec->tx_max_coalesced_frames);
+	err = virtnet_send_tx_ctrl_coal_vq_cmd(vi, queue,
+					       ec->tx_coalesce_usecs,
+					       ec->tx_max_coalesced_frames);
 	if (err)
 		return err;
 
-	vi->sq[queue].intr_coal.max_usecs = ec->tx_coalesce_usecs;
-	vi->sq[queue].intr_coal.max_packets = ec->tx_max_coalesced_frames;
-
 	return 0;
 }
 
Signature · 1 line
2.19.1.6.gb485710b
author
#4 lore raw

PATCH v8 4/4 virtio-net: support rx netdim

In reply to Heng Qi

By comparing the traffic information in the complete napi processes, let the virtio-net driver automatically adjust the coalescing moderation parameters of each receive queue.

---
v7->v8:
- Add select DIMLIB

v6->v7:
- Drop the patch titled "spin lock for ctrl cmd access"
- Use rtnl_trylock to avoid the deadlock.

v5->v6:
- Use spin lock and cancel_work_sync to synchronize

v4->v5:
- Fix possible synchronization issues using cancel_work().
- Reduce if/else nesting levels

v2->v3:
- Some minor modifications.

v1->v2:
- Improved the judgment of dim switch conditions.
- Cancel the work when vq reset.

 drivers/net/Kconfig      |   1 +
 drivers/net/virtio_net.c | 176 +++++++++++++++++++++++++++++++++++----
 2 files changed, 163 insertions(+), 14 deletions(-)
drivers/net/Kconfig +1 -0
index af0da4bb429b..8ca0bc223b30 100644
@@ -434,6 +434,7 @@ config VIRTIO_NET
 	tristate "Virtio network driver"
 	depends on VIRTIO
 	select NET_FAILOVER
+	select DIMLIB
 	help
 	  This is the virtual network driver for virtio.  It can be used with
 	  QEMU based VMMs (like KVM or Xen).  Say Y or M.
drivers/net/virtio_net.c +162 -14

314 lines not on this page · raw message

Signature · 1 line
2.19.1.6.gb485710b
#5 lore raw
In reply to Heng Qi
This series was applied to netdev/net-next.git (main) by David S. Miller <[email protected]>:

Hello:

This series was applied to netdev/net-next.git (main) by David S. Miller <[email protected]>:

Quoted 9 lines · On Mon, 11 Dec 2023 18:36:03 +0800 you wrote:

Now, virtio-net already supports per-queue moderation parameter setting. Based on this, we use the linux dimlib to support dynamic coalescing moderation for virtio-net.

Due to some scheduling issues, we only support and test the rx dim.

Some test results:

[...]

Here is the summary with links:
- [net-next,v8,1/4] virtio-net: returns whether napi is complete

    https://git.kernel.org/netdev/net-next/c/7949c06ad9a8
  - [net-next,v8,2/4] virtio-net: separate rx/tx coalescing moderation cmds
    https://git.kernel.org/netdev/net-next/c/d7180080ddf7
  - [net-next,v8,3/4] virtio-net: extract virtqueue coalescig cmd for reuse
    https://git.kernel.org/netdev/net-next/c/1db43c0818e2
  - [net-next,v8,4/4] virtio-net: support rx netdim
    https://git.kernel.org/netdev/net-next/c/6208799553a8

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html