virtio-net: support dynamic coalescing moderation
Subsystems (4)
v7 cover virtio-net: support dynamic coalescing moderation
Now, virtio-net already supports per-queue moderation parameter setting. Based on this, we use the linux dimlib to support dynamic coalescing moderation for virtio-net.
Due to some scheduling issues, we only support and test the rx dim.
Some test results:
I. Sockperf UDP
=================================================
1. Envrxq_0 with affinity to cpu_0.
2. Cmd
client: taskset -c 0 sockperf tp -p 8989 -i $IP -t 10 -m 16B
server: taskset -c 0 sockperf sr -p 8989
3. Result
dim off: 1143277.00 rxpps, throughput 17.844 MBps, cpu is 100%. dim on: 1124161.00 rxpps, throughput 17.610 MBps, cpu is 83.5%.
=================================================
II. Redis
=================================================
1. Env
There are 8 rxqs, and rxq_i with affinity to cpu_i.
2. Result
When all cpus are 100%, ops/sec of memtier_benchmark client is
dim off: 978437.23 dim on: 1143638.28
=================================================
III. Nginx
=================================================
1. Env
There are 8 rxqs and rxq_i with affinity to cpu_i.
2. Result
When all cpus are 100%, requests/sec of wrk client is
dim off: 877931.67 dim on: 1019160.31
=================================================
IV. Latency of sockperf udp
=================================================
1. Rx cmd
taskset -c 0 sockperf sr -p 8989
2. Tx cmd
taskset -c 0 sockperf pp -i ${ip} -p 8989 -t 10
After running this cmd 5 times and averaging the results,
3. Result
dim off: 17.7735 usec dim on: 18.0110 usec
=================================================
Changelog:v6->v7:
- Drop the patch titled "spin lock for ctrl cmd access"
- Use rtnl_trylock to avoid the deadlock.
v5->v6:
- Add patch(4/5): spin lock for ctrl cmd access
- Patch(5/5):
- Use spin lock and cancel_work_sync to synchronize
v4->v5:
- Patch(4/4):
- Fix possible synchronization issues with cancel_work_sync.
- Reduce if/else nesting levels
v3->v4:
- Patch(5/5): drop.
v2->v3:
- Patch(4/5): some minor modifications.
v1->v2:
- Patch(2/5): a minor fix.
- Patch(4/5):
- improve the judgment of dim switch conditions.
- Cancel the work when vq reset.
- Patch(5/5): drop the tx dim implementation.
Heng Qi (4):
virtio-net: returns whether napi is complete
virtio-net: separate rx/tx coalescing moderation cmds
virtio-net: extract virtqueue coalescig cmd for reuse
virtio-net: support rx netdim
drivers/net/virtio_net.c | 297 ++++++++++++++++++++++++++++++++------- 1 file changed, 248 insertions(+), 49 deletions(-)
Signature · 1 line
2.19.1.6.gb485710b
PATCH v7 1/4 virtio-net: returns whether napi is complete
rx netdim needs to count the traffic during a complete napi process, and start updating and comparing samples to make decisions after the napi ends. Let virtqueue_napi_complete() return true if napi is done, otherwise vice versa.
--- drivers/net/virtio_net.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/net/virtio_net.c +5 -1
@@ -431,7 +431,7 @@ static void virtqueue_napi_schedule(struct napi_struct *napi, } } -static void virtqueue_napi_complete (struct napi_struct *napi, +static bool virtqueue_napi_complete (struct napi_struct *napi,struct virtqueue *vq,int processed) {int opaque;
@@ -440,9 +440,13 @@ static void virtqueue_napi_complete(struct napi_struct *napi,if (napi_complete_done (napi, processed)) {if (unlikely (virtqueue_poll (vq, opaque)))virtqueue_napi_schedule (napi, vq); +else +return true; }else {virtqueue_disable_cb (vq); } + +return false; }static void skb_xmit_done (struct virtqueue *vq)
Signature · 1 line
2.19.1.6.gb485710b
PATCH v7 2/4 virtio-net: separate rx/tx coalescing moderation cmds
In reply to Heng QiThis patch separates the rx and tx global coalescing moderation commands to support netdim switches in subsequent patches.
--- drivers/net/virtio_net.c | 31 ++++++++++++++++++++++++++++--- 1 file changed, 28 insertions(+), 3 deletions(-)
drivers/net/virtio_net.c +28 -3
@@ -3266,10 +3266,10 @@ static int virtnet_get_link_ksettings(struct net_device *dev,return 0 ; } -static int virtnet_send_notf_coal_cmds (struct virtnet_info *vi, -struct ethtool_coalesce *ec) +static int virtnet_send_tx_notf_coal_cmds (struct virtnet_info *vi, +struct ethtool_coalesce *ec) { -struct scatterlist sgs_tx, sgs_rx; +struct scatterlist sgs_tx;int i; vi->ctrl->coal_tx.tx_usecs =cpu_to_le32 (ec->tx_coalesce_usecs);
@@ -3289,6 +3289,15 @@ static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi, vi->sq[i].intr_coal.max_packets = ec->tx_max_coalesced_frames; } +return 0 ; +} + +static int virtnet_send_rx_notf_coal_cmds (struct virtnet_info *vi, +struct ethtool_coalesce *ec) +{ +struct scatterlist sgs_rx; +int i; + vi->ctrl->coal_rx.rx_usecs =cpu_to_le32 (ec->rx_coalesce_usecs); vi->ctrl->coal_rx.rx_max_packets =cpu_to_le32 (ec->rx_max_coalesced_frames);sg_init_one (&sgs_rx, &vi->ctrl->coal_rx,sizeof (vi->ctrl->coal_rx));
@@ -3309,6 +3318,22 @@ static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi,return 0 ; } +static int virtnet_send_notf_coal_cmds (struct virtnet_info *vi, +struct ethtool_coalesce *ec) +{ +int err; + + err =virtnet_send_tx_notf_coal_cmds (vi, ec); +if (err) +return err; + + err =virtnet_send_rx_notf_coal_cmds (vi, ec); +if (err) +return err; + +return 0 ; +} +static int virtnet_send_ctrl_coal_vq_cmd (struct virtnet_info *vi,u16 vqn,u32 max_usecs,u32 max_packets) {
Signature · 1 line
2.19.1.6.gb485710b
PATCH v7 3/4 virtio-net: extract virtqueue coalescig cmd for reuse
In reply to Heng QiExtract commands to set virtqueue coalescing parameters for reuse by ethtool -Q, vq resize and netdim.
--- drivers/net/virtio_net.c | 106 +++++++++++++++++++++++---------------- 1 file changed, 64 insertions(+), 42 deletions(-)
drivers/net/virtio_net.c +64 -42
@@ -2849,6 +2849,58 @@ static void virtnet_cpu_notif_remove(struct virtnet_info *vi) &vi->node_dead); } +static int virtnet_send_ctrl_coal_vq_cmd (struct virtnet_info *vi, +u16 vqn,u32 max_usecs,u32 max_packets) +{ +struct scatterlist sgs; + + vi->ctrl->coal_vq.vqn =cpu_to_le16 (vqn); + vi->ctrl->coal_vq.coal.max_usecs =cpu_to_le32 (max_usecs); + vi->ctrl->coal_vq.coal.max_packets =cpu_to_le32 (max_packets); +sg_init_one (&sgs, &vi->ctrl->coal_vq,sizeof (vi->ctrl->coal_vq)); + +if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_NOTF_COAL , +VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET , + &sgs)) +return -EINVAL ; + +return 0 ; +} + +static int virtnet_send_rx_ctrl_coal_vq_cmd (struct virtnet_info *vi, +u16 queue,u32 max_usecs, +u32 max_packets) +{ +int err; + + err =virtnet_send_ctrl_coal_vq_cmd (vi,rxq2vq (queue), + max_usecs, max_packets); +if (err) +return err; + + vi->rq[queue].intr_coal.max_usecs = max_usecs; + vi->rq[queue].intr_coal.max_packets = max_packets; + +return 0 ; +} + +static int virtnet_send_tx_ctrl_coal_vq_cmd (struct virtnet_info *vi, +u16 queue,u32 max_usecs, +u32 max_packets) +{ +int err; + + err =virtnet_send_ctrl_coal_vq_cmd (vi,txq2vq (queue), + max_usecs, max_packets); +if (err) +return err; + + vi->sq[queue].intr_coal.max_usecs = max_usecs; + vi->sq[queue].intr_coal.max_packets = max_packets; + +return 0 ; +} + static void virtnet_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring, struct kernel_ethtool_ringparam *kernel_ring,
@@ -2906,14 +2958,11 @@ static int virtnet_set_ringparam(struct net_device *dev,* through the VIRTIO_NET_CTRL_NOTF_COAL_TX_SET command, or, if the driver * did not set any TX coalescing parameters, to 0. */ - err =virtnet_send_ctrl_coal_vq_cmd (vi,txq2vq (i), - vi->intr_coal_tx.max_usecs, - vi->intr_coal_tx.max_packets); + err =virtnet_send_tx_ctrl_coal_vq_cmd (vi, i, + vi->intr_coal_tx.max_usecs, + vi->intr_coal_tx.max_packets);if (err)return err; - - vi->sq[i].intr_coal.max_usecs = vi->intr_coal_tx.max_usecs; - vi->sq[i].intr_coal.max_packets = vi->intr_coal_tx.max_packets; }if (ring->rx_pending != rx_pending) {
@@ -2922,14 +2971,11 @@ static int virtnet_set_ringparam(struct net_device *dev,return err;/* The reason is same as the transmit virtqueue reset */ - err =virtnet_send_ctrl_coal_vq_cmd (vi,rxq2vq (i), - vi->intr_coal_rx.max_usecs, - vi->intr_coal_rx.max_packets); + err =virtnet_send_rx_ctrl_coal_vq_cmd (vi, i, + vi->intr_coal_rx.max_usecs, + vi->intr_coal_rx.max_packets);if (err)return err; - - vi->rq[i].intr_coal.max_usecs = vi->intr_coal_rx.max_usecs; - vi->rq[i].intr_coal.max_packets = vi->intr_coal_rx.max_packets; } }
@@ -3334,48 +3380,24 @@ static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi,return 0 ; } -static int virtnet_send_ctrl_coal_vq_cmd (struct virtnet_info *vi, -u16 vqn,u32 max_usecs,u32 max_packets) -{ -struct scatterlist sgs; - - vi->ctrl->coal_vq.vqn =cpu_to_le16 (vqn); - vi->ctrl->coal_vq.coal.max_usecs =cpu_to_le32 (max_usecs); - vi->ctrl->coal_vq.coal.max_packets =cpu_to_le32 (max_packets); -sg_init_one (&sgs, &vi->ctrl->coal_vq,sizeof (vi->ctrl->coal_vq)); - -if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_NOTF_COAL , -VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET , - &sgs)) -return -EINVAL ; - -return 0 ; -} -static int virtnet_send_notf_coal_vq_cmds (struct virtnet_info *vi,struct ethtool_coalesce *ec,u16 queue) {int err; - err =virtnet_send_ctrl_coal_vq_cmd (vi,rxq2vq (queue), - ec->rx_coalesce_usecs, - ec->rx_max_coalesced_frames); + err =virtnet_send_rx_ctrl_coal_vq_cmd (vi, queue, + ec->rx_coalesce_usecs, + ec->rx_max_coalesced_frames);if (err)return err; - vi->rq[queue].intr_coal.max_usecs = ec->rx_coalesce_usecs; - vi->rq[queue].intr_coal.max_packets = ec->rx_max_coalesced_frames; - - err =virtnet_send_ctrl_coal_vq_cmd (vi,txq2vq (queue), - ec->tx_coalesce_usecs, - ec->tx_max_coalesced_frames); + err =virtnet_send_tx_ctrl_coal_vq_cmd (vi, queue, + ec->tx_coalesce_usecs, + ec->tx_max_coalesced_frames);if (err)return err; - vi->sq[queue].intr_coal.max_usecs = ec->tx_coalesce_usecs; - vi->sq[queue].intr_coal.max_packets = ec->tx_max_coalesced_frames; -return 0 ; }
Signature · 1 line
2.19.1.6.gb485710b
PATCH v7 4/4 virtio-net: support rx netdim
In reply to Heng QiBy comparing the traffic information in the complete napi processes, let the virtio-net driver automatically adjust the coalescing moderation parameters of each receive queue.
---v6->v7:
- Drop the patch titled "spin lock for ctrl cmd access"
- Use rtnl_trylock to avoid the deadlock.
v5->v6:
- Use spin lock and cancel_work_sync to synchronize
v4->v5:
- Fix possible synchronization issues using cancel_work().
- Reduce if/else nesting levels
v2->v3:
- Some minor modifications.
v1->v2:
- Improved the judgment of dim switch conditions.
- Cancel the work when vq reset.
drivers/net/virtio_net.c | 176 +++++++++++++++++++++++++++++++++++---- 1 file changed, 162 insertions(+), 14 deletions(-)
drivers/net/virtio_net.c +162 -14
@@ -19,6 +19,7 @@#include <linux/average.h> #include <linux/filter.h> #include <linux/kernel.h> +#include <linux/dim.h> #include <net/route.h> #include <net/xdp.h> #include <net/net_failover.h>
@@ -172,6 +173,17 @@ struct receive_queue {struct virtnet_rq_stats stats; +/* The number of rx notifications */ +u16 calls; + +/* Is dynamic interrupt moderation enabled? */ +bool dim_enabled; + +/* Dynamic Interrupt Moderation */ +struct dim dim; + +u32 packets_in_napi; +struct virtnet_interrupt_coalesce intr_coal;/* Chain pages by the private ptr. */
@@ -305,6 +317,9 @@ struct virtnet_info {u8 duplex;u32 speed; +/* Is rx dynamic interrupt moderation enabled? */ +bool rx_dim_enabled; +/* Interrupt coalescing settings */ struct virtnet_interrupt_coalesce intr_coal_tx;struct virtnet_interrupt_coalesce intr_coal_rx;
@@ -2001,6 +2016,7 @@ static void skb_recv_done(struct virtqueue *rvq)struct virtnet_info *vi = rvq->vdev->priv;struct receive_queue *rq = &vi->rq[vq2rxq (rvq)]; + rq->calls++;virtqueue_napi_schedule (&rq->napi, rvq); }
@@ -2141,6 +2157,24 @@ static void virtnet_poll_cleantx(struct receive_queue *rq) } } +static void virtnet_rx_dim_update (struct virtnet_info *vi,struct receive_queue *rq) +{ +struct dim_sample cur_sample = {}; + +if (!rq->packets_in_napi) +return ; + +u64_stats_update_begin (&rq->stats.syncp); +dim_update_sample (rq->calls, +u64_stats_read (&rq->stats.packets), +u64_stats_read (&rq->stats.bytes), + &cur_sample); +u64_stats_update_end (&rq->stats.syncp); + +net_dim (&rq->dim, cur_sample); + rq->packets_in_napi =0 ; +} +static int virtnet_poll (struct napi_struct *napi,int budget) { struct receive_queue *rq =
@@ -2149,17 +2183,22 @@ static int virtnet_poll(struct napi_struct *napi, int budget)struct send_queue *sq;unsigned int received;unsigned int xdp_xmit =0 ; +bool napi_complete;virtnet_poll_cleantx (rq); received =virtnet_receive (rq, budget, &xdp_xmit); + rq->packets_in_napi += received;if (xdp_xmit &VIRTIO_XDP_REDIR )xdp_do_flush ();/* Out of packets? */ -if (received < budget) -virtqueue_napi_complete (napi, rq->vq, received); +if (received < budget) { + napi_complete =virtqueue_napi_complete (napi, rq->vq, received); +if (napi_complete && rq->dim_enabled) +virtnet_rx_dim_update (vi, rq); + }if (xdp_xmit &VIRTIO_XDP_TX ) { sq =virtnet_xdp_get_sq (vi);
@@ -2230,8 +2269,11 @@ static int virtnet_open(struct net_device *dev)disable_delayed_refill (vi);cancel_delayed_work_sync (&vi->refill); -for (i--; i >=0 ; i--) +for (i--; i >=0 ; i--) {virtnet_disable_queue_pair (vi, i); +cancel_work_sync (&vi->rq[i].dim.work); + } +return err; }
@@ -2393,8 +2435,10 @@ static int virtnet_rx_resize(struct virtnet_info *vi, qindex = rq - vi->rq; -if (running) +if (running) {napi_disable (&rq->napi); +cancel_work_sync (&rq->dim.work); + } err =virtqueue_resize (rq->vq, ring_num, virtnet_rq_free_unused_buf);if (err)
@@ -2641,8 +2685,10 @@ static int virtnet_close(struct net_device *dev)/* Make sure refill_work doesn't re-enable napi! */ cancel_delayed_work_sync (&vi->refill); -for (i =0 ; i < vi->max_queue_pairs; i++) +for (i =0 ; i < vi->max_queue_pairs; i++) {virtnet_disable_queue_pair (vi, i); +cancel_work_sync (&vi->rq[i].dim.work); + }return 0 ; }
@@ -2914,9 +2960,6 @@ static void virtnet_get_ringparam(struct net_device *dev, ring->tx_pending =virtqueue_get_vring_size (vi->sq[0 ].vq); } -static int virtnet_send_ctrl_coal_vq_cmd (struct virtnet_info *vi, -u16 vqn,u32 max_usecs,u32 max_packets); - static int virtnet_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ring, struct kernel_ethtool_ringparam *kernel_ring,
@@ -3327,7 +3370,6 @@ static int virtnet_send_tx_notf_coal_cmds(struct virtnet_info *vi, &sgs_tx))return -EINVAL ; -/* Save parameters */ vi->intr_coal_tx.max_usecs = ec->tx_coalesce_usecs; vi->intr_coal_tx.max_packets = ec->tx_max_coalesced_frames;for (i =0 ; i < vi->max_queue_pairs; i++) {
@@ -3341,9 +3383,34 @@ static int virtnet_send_tx_notf_coal_cmds(struct virtnet_info *vi,static int virtnet_send_rx_notf_coal_cmds (struct virtnet_info *vi,struct ethtool_coalesce *ec) { +bool rx_ctrl_dim_on = !!ec->use_adaptive_rx_coalesce;struct scatterlist sgs_rx;int i; +if (rx_ctrl_dim_on && !virtio_has_feature (vi->vdev,VIRTIO_NET_F_VQ_NOTF_COAL )) +return -EOPNOTSUPP ; + +if (rx_ctrl_dim_on && (ec->rx_coalesce_usecs != vi->intr_coal_rx.max_usecs || + ec->rx_max_coalesced_frames != vi->intr_coal_rx.max_packets)) +return -EINVAL ; + +if (rx_ctrl_dim_on && !vi->rx_dim_enabled) { + vi->rx_dim_enabled = true; +for (i =0 ; i < vi->max_queue_pairs; i++) + vi->rq[i].dim_enabled = true; +return 0 ; + } + +if (!rx_ctrl_dim_on && vi->rx_dim_enabled) { + vi->rx_dim_enabled = false; +for (i =0 ; i < vi->max_queue_pairs; i++) + vi->rq[i].dim_enabled = false; + } + +/* Since the per-queue coalescing params can be set, +* we need apply the global new params even if they +* are not updated. +*/ vi->ctrl->coal_rx.rx_usecs =cpu_to_le32 (ec->rx_coalesce_usecs); vi->ctrl->coal_rx.rx_max_packets =cpu_to_le32 (ec->rx_max_coalesced_frames);sg_init_one (&sgs_rx, &vi->ctrl->coal_rx,sizeof (vi->ctrl->coal_rx));
@@ -3353,7 +3420,6 @@ static int virtnet_send_rx_notf_coal_cmds(struct virtnet_info *vi, &sgs_rx))return -EINVAL ; -/* Save parameters */ vi->intr_coal_rx.max_usecs = ec->rx_coalesce_usecs; vi->intr_coal_rx.max_packets = ec->rx_max_coalesced_frames;for (i =0 ; i < vi->max_queue_pairs; i++) {
@@ -3380,18 +3446,52 @@ static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi,return 0 ; } -static int virtnet_send_notf_coal_vq_cmds (struct virtnet_info *vi, -struct ethtool_coalesce *ec, -u16 queue) +static int virtnet_send_rx_notf_coal_vq_cmds (struct virtnet_info *vi, +struct ethtool_coalesce *ec, +u16 queue) { +bool rx_ctrl_dim_on = !!ec->use_adaptive_rx_coalesce; +bool cur_rx_dim = vi->rq[queue].dim_enabled; +u32 max_usecs, max_packets;int err; + max_usecs = vi->rq[queue].intr_coal.max_usecs; + max_packets = vi->rq[queue].intr_coal.max_packets; + +if (rx_ctrl_dim_on && (ec->rx_coalesce_usecs != max_usecs || + ec->rx_max_coalesced_frames != max_packets)) +return -EINVAL ; + +if (rx_ctrl_dim_on && !cur_rx_dim) { + vi->rq[queue].dim_enabled = true; +return 0 ; + } + +if (!rx_ctrl_dim_on && cur_rx_dim) + vi->rq[queue].dim_enabled = false; + +/* If no params are updated, userspace ethtool will +* reject the modification. +*/ err =virtnet_send_rx_ctrl_coal_vq_cmd (vi, queue, ec->rx_coalesce_usecs, ec->rx_max_coalesced_frames);if (err)return err; +return 0 ; +} + +static int virtnet_send_notf_coal_vq_cmds (struct virtnet_info *vi, +struct ethtool_coalesce *ec, +u16 queue) +{ +int err; + + err =virtnet_send_rx_notf_coal_vq_cmds (vi, ec, queue); +if (err) +return err; + err =virtnet_send_tx_ctrl_coal_vq_cmd (vi, queue, ec->tx_coalesce_usecs, ec->tx_max_coalesced_frames);
@@ -3401,6 +3501,49 @@ static int virtnet_send_notf_coal_vq_cmds(struct virtnet_info *vi,return 0 ; } +static void virtnet_rx_dim_work (struct work_struct *work) +{ + struct dim *dim = container_of(work, struct dim, work); +struct receive_queue *rq =container_of (dim, + struct receive_queue, dim); +struct virtnet_info *vi = rq->vq->vdev->priv; +struct net_device *dev = vi->dev; +struct dim_cq_moder update_moder; +int i, qnum, err; + +if (!rtnl_trylock ()) +return ; + +/* Each rxq's work is queued by "net_dim()->schedule_work()" +* in response to NAPI traffic changes. Note that dim->profile_ix +* for each rxq is updated prior to the queuing action. +* So we only need to traverse and update profiles for all rxqs +* in the work which is holding rtnl_lock. +*/ +for (i =0 ; i < vi->curr_queue_pairs; i++) { + rq = &vi->rq[i]; + dim = &rq->dim; + qnum = rq - vi->rq; + +if (!rq->dim_enabled) +continue ; + + update_moder =net_dim_get_rx_moderation (dim->mode, dim->profile_ix); +if (update_moder.usec != rq->intr_coal.max_usecs || + update_moder.pkts != rq->intr_coal.max_packets) { + err =virtnet_send_rx_ctrl_coal_vq_cmd (vi, qnum, + update_moder.usec, + update_moder.pkts); +if (err) +pr_debug ("%s: Failed to send dim parameters on rxq%d\n" , + dev->name, qnum); + dim->state =DIM_START_MEASURE ; + } + } + +rtnl_unlock (); +} +static int virtnet_coal_params_supported (struct ethtool_coalesce *ec) {/* usecs coalescing is supported only if VIRTIO_NET_F_NOTF_COAL
@@ -3482,6 +3625,7 @@ static int virtnet_get_coalesce(struct net_device *dev, ec->tx_coalesce_usecs = vi->intr_coal_tx.max_usecs; ec->tx_max_coalesced_frames = vi->intr_coal_tx.max_packets; ec->rx_max_coalesced_frames = vi->intr_coal_rx.max_packets; + ec->use_adaptive_rx_coalesce = vi->rx_dim_enabled; }else { ec->rx_max_coalesced_frames =1 ;
@@ -3539,6 +3683,7 @@ static int virtnet_get_per_queue_coalesce(struct net_device *dev, ec->tx_coalesce_usecs = vi->sq[queue].intr_coal.max_usecs; ec->tx_max_coalesced_frames = vi->sq[queue].intr_coal.max_packets; ec->rx_max_coalesced_frames = vi->rq[queue].intr_coal.max_packets; + ec->use_adaptive_rx_coalesce = vi->rq[queue].dim_enabled; }else { ec->rx_max_coalesced_frames =1 ;
@@ -3664,7 +3809,7 @@ static int virtnet_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info)static const struct ethtool_ops virtnet_ethtool_ops = { .supported_coalesce_params =ETHTOOL_COALESCE_MAX_FRAMES | -ETHTOOL_COALESCE_USECS , +ETHTOOL_COALESCE_USECS |ETHTOOL_COALESCE_USE_ADAPTIVE_RX , .get_drvinfo = virtnet_get_drvinfo, .get_link = ethtool_op_get_link, .get_ringparam = virtnet_get_ringparam,
@@ -4254,6 +4399,9 @@ static int virtnet_alloc_queues(struct virtnet_info *vi) virtnet_poll_tx, napi_tx ? napi_weight : 0); +INIT_WORK (&vi->rq[i].dim.work, virtnet_rx_dim_work); + vi->rq[i].dim.mode =DIM_CQ_PERIOD_MODE_START_FROM_EQE ; +sg_init_table (vi->rq[i].sg,ARRAY_SIZE (vi->rq[i].sg));ewma_pkt_len_init (&vi->rq[i].mrg_avg_pkt_len);sg_init_table (vi->sq[i].sg,ARRAY_SIZE (vi->sq[i].sg));
Signature · 1 line
2.19.1.6.gb485710b
kernel test robot
build botRe: [PATCH net-next v7 4/4] virtio-net: support rx netdim
kernel test robot noticed the following build errors:
Hi Heng,
kernel test robot noticed the following build errors:
[auto build test ERROR on net-next/main]
url: https://github.com/intel-lab-lkp/linux/commits/Heng-Qi/virtio-net-returns-whether-napi-is-complete/20231207-143044 base: net-next/main patch link: https://lore.kernel.org/r/9be20d1e86bea91b373f28401a96401b640ef4d1.1701929854.git.hengqi%40linux.alibaba.com patch subject: [PATCH net-next v7 4/4] virtio-net: support rx netdim config: nios2-randconfig-r064-20231209 (https://download.01.org/0day-ci/archive/20231209/[email protected]/config) compiler: nios2-linux-gcc (GCC) 13.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231209/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All errors (new ones prefixed by >>):
nios2-linux-ld: drivers/net/virtio_net.o: in function `virtnet_rx_dim_work':
virtio_net.c:(.text+0x21dc): undefined reference to `net_dim_get_rx_moderation'
>> virtio_net.c:(.text+0x21dc): relocation truncated to fit: R_NIOS2_CALL26 against `net_dim_get_rx_moderation' nios2-linux-ld: drivers/net/virtio_net.o: in function `virtnet_poll': virtio_net.c:(.text+0x97bc): undefined reference to `net_dim' >> virtio_net.c:(.text+0x97bc): relocation truncated to fit: R_NIOS2_CALL26 against `net_dim'
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
Michael S. Tsirkin
maintainerRe: [PATCH net-next v7 4/4] virtio-net: support rx netdim
Quoted 19 lines · kernel test robot
Hi Heng,
kernel test robot noticed the following build errors:
[auto build test ERROR on net-next/main]
url: https://github.com/intel-lab-lkp/linux/commits/Heng-Qi/virtio-net-returns-whether-napi-is-complete/20231207-143044 base: net-next/main patch link: https://lore.kernel.org/r/9be20d1e86bea91b373f28401a96401b640ef4d1.1701929854.git.hengqi%40linux.alibaba.com patch subject: [PATCH net-next v7 4/4] virtio-net: support rx netdim config: nios2-randconfig-r064-20231209 (https://download.01.org/0day-ci/archive/20231209/[email protected]/config) compiler: nios2-linux-gcc (GCC) 13.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231209/[email protected]/reproduce)If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Quoted 8 lines
All errors (new ones prefixed by >>):
nios2-linux-ld:
drivers/net/virtio_net.o: in function `virtnet_rx_dim_work':virtio_net.c:(.text+0x21dc): undefined reference to `net_dim_get_rx_moderation'Quoted 1 line
Quoted 1 line
virtio_net.c:(.text+0x21dc): relocation truncated to fit:
R_NIOS2_CALL26against `net_dim_get_rx_moderation'nios2-linux-ld:
drivers/net/virtio_net.o: in function `virtnet_poll':virtio_net.c:(.text+0x97bc): undefined reference to `net_dim'Quoted 1 line
Quoted 1 line
virtio_net.c:(.text+0x97bc): relocation truncated to fit:
R_NIOS2_CALL26against `net_dim'
Looks like select DIMLIB is missing?
Quoted 3 lines
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
Re: [PATCH net-next v7 4/4] virtio-net: support rx netdim
Quoted 22 lines · Michael S. Tsirkin
Quoted 21 lines · kernel test robot
Hi Heng,
kernel test robot noticed the following build errors:
[auto build test ERROR on net-next/main]
url: https://github.com/intel-lab-lkp/linux/commits/Heng-Qi/virtio-net-returns-whether-napi-is-complete/20231207-143044 base: net-next/main patch link: https://lore.kernel.org/r/9be20d1e86bea91b373f28401a96401b640ef4d1.1701929854.git.hengqi%40linux.alibaba.com patch subject: [PATCH net-next v7 4/4] virtio-net: support rx netdim config: nios2-randconfig-r064-20231209 (https://download.01.org/0day-ci/archive/20231209/[email protected]/config) compiler: nios2-linux-gcc (GCC) 13.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231209/[email protected]/reproduce)If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/All errors (new ones prefixed by >>):
Quoted 8 lines
Quoted 6 lines
nios2-linux-ld:
drivers/net/virtio_net.o: in function `virtnet_rx_dim_work':
virtio_net.c:(.text+0x21dc): undefined reference to `net_dim_get_rx_moderation'Quoted 1 line
Quoted 1 line
virtio_net.c:(.text+0x21dc): relocation truncated to fit:
R_NIOS2_CALL26against `net_dim_get_rx_moderation'nios2-linux-ld:
drivers/net/virtio_net.o: in function `virtnet_poll':
virtio_net.c:(.text+0x97bc): undefined reference to `net_dim'Quoted 1 line
Quoted 1 line
virtio_net.c:(.text+0x97bc): relocation truncated to fit:
R_NIOS2_CALL26against `net_dim'Looks like select DIMLIB is missing?
Yes. I'll add this. Thanks!
Quoted 3 lines
Quoted 3 lines
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki