arm64: dts: rockchip: Add regulator suffix to BPI-R2-Pro
Subsystems (2)
PATCH 1/1 arm64: dts: rockchip: Add regulator suffix to BPI-R2-Pro
From: Frank Wunderlich <[email protected]>
Add -regulator suffix to regulator names on Banana Pi R2 Pro board as discussed on Mailinglist
---
https://patchwork.kernel.org/project/linux-rockchip/patch/[email protected]/
--- arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts +6 -6
@@ -46,7 +46,7 @@ green_led: led-1 { }; }; - dc_12v: dc-12v { + dc_12v: dc-12v-regulator { compatible = "regulator-fixed"; regulator-name = "dc_12v"; regulator-always-on;
@@ -66,7 +66,7 @@ hdmi_con_in: endpoint { }; }; - vcc3v3_sys: vcc3v3-sys { + vcc3v3_sys: vcc3v3-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; regulator-always-on;
@@ -76,7 +76,7 @@ vcc3v3_sys: vcc3v3-sys { vin-supply = <&dc_12v>; }; - vcc5v0_sys: vcc5v0-sys { + vcc5v0_sys: vcc5v0-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on;
@@ -146,7 +146,7 @@ vcc3v3_ngff: vcc3v3-ngff-regulator { vin-supply = <&vcc3v3_pi6c_05>; }; - vcc5v0_usb: vcc5v0_usb { + vcc5v0_usb: vcc5v0_usb-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usb"; regulator-always-on;
@@ -156,7 +156,7 @@ vcc5v0_usb: vcc5v0_usb { vin-supply = <&dc_12v>; }; - vcc5v0_usb_host: vcc5v0-usb-host { + vcc5v0_usb_host: vcc5v0-usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
@@ -168,7 +168,7 @@ vcc5v0_usb_host: vcc5v0-usb-host { vin-supply = <&vcc5v0_usb>; }; - vcc5v0_usb_otg: vcc5v0-usb-otg { + vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
Signature · 7 lines
2.34.1 _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip
Quoted 44 lines · Frank Wunderlich
From: Frank Wunderlich <[email protected]>
Add -regulator suffix to regulator names on Banana Pi R2 Pro board as discussed on Mailinglist
Signed-off-by Frank Wunderlich <[email protected]>---
https://patchwork.kernel.org/project/linux-rockchip/patch/[email protected]/--- arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts +3
-3@@ -46,7 +46,7 @@ green_led: led-1 { }; }; - dc_12v: dc-12v { + dc_12v: dc-12v-regulator { compatible = "regulator-fixed"; regulator-name = "dc_12v"; regulator-always-on;@@ -66,7 +66,7 @@ hdmi_con_in: endpoint { }; }; - vcc3v3_sys: vcc3v3-sys { + vcc3v3_sys: vcc3v3-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; regulator-always-on;@@ -76,7 +76,7 @@ vcc3v3_sys: vcc3v3-sys { vin-supply = <&dc_12v>; }; - vcc5v0_sys: vcc5v0-sys { + vcc5v0_sys: vcc5v0-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on;
arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts vcc3v3_ngff: vcc3v3-ngff-regulator { · line 149
Quoted 5 lines
arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts +1
-1@@ -146,7 +146,7 @@ vcc3v3_ngff: vcc3v3-ngff-regulator { vin-supply = <&vcc3v3_pi6c_05>; }; - vcc5v0_usb: vcc5v0_usb { + vcc5v0_usb: vcc5v0_usb-regulator {
While at it drop underscore in node name (hyphen is ok).
Best regards,
Krzysztof
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip
Heiko Stübner
maintainerAm Dienstag, 6. September 2022, 17:55:03 CEST schrieb Frank Wunderlich:
Quoted 6 lines
From: Frank Wunderlich <[email protected]>
Add -regulator suffix to regulator names on Banana Pi R2 Pro board as discussed on Mailinglist
Signed-off-by Frank Wunderlich <[email protected]>
looks like my b4 thanks mail got lost, so manually:
applied for 6.1
Thanks
Heiko
Quoted 65 lines
---
https://patchwork.kernel.org/project/linux-rockchip/patch/[email protected]/--- arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts +6
-6@@ -46,7 +46,7 @@ green_led: led-1 { }; }; - dc_12v: dc-12v { + dc_12v: dc-12v-regulator { compatible = "regulator-fixed"; regulator-name = "dc_12v"; regulator-always-on;@@ -66,7 +66,7 @@ hdmi_con_in: endpoint { }; }; - vcc3v3_sys: vcc3v3-sys { + vcc3v3_sys: vcc3v3-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; regulator-always-on;@@ -76,7 +76,7 @@ vcc3v3_sys: vcc3v3-sys { vin-supply = <&dc_12v>; }; - vcc5v0_sys: vcc5v0-sys { + vcc5v0_sys: vcc5v0-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on;@@ -146,7 +146,7 @@ vcc3v3_ngff: vcc3v3-ngff-regulator { vin-supply = <&vcc3v3_pi6c_05>; }; - vcc5v0_usb: vcc5v0_usb { + vcc5v0_usb: vcc5v0_usb-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usb"; regulator-always-on;@@ -156,7 +156,7 @@ vcc5v0_usb: vcc5v0_usb { vin-supply = <&dc_12v>; }; - vcc5v0_usb_host: vcc5v0-usb-host { + vcc5v0_usb_host: vcc5v0-usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;@@ -168,7 +168,7 @@ vcc5v0_usb_host: vcc5v0-usb-host { vin-supply = <&vcc5v0_usb>; }; - vcc5v0_usb_otg: vcc5v0-usb-otg { + vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;