dt-bindings: ieee802154: Convert at86rf230.txt yaml format
Subsystems (5)
Frank Li
maintainerPATCH RESEND v3 1/1 dt-bindings: ieee802154: Convert at86rf230.txt yaml format
Convert at86rf230.txt yaml format.
Additional changes:
- Add ref to spi-peripheral-props.yaml.
- Add parent spi node in examples.
---
Resent v3 include Rob's review tag
change in v3
- add maximum: 0xf for xtal-trim
- drop 'u8 value ...' for xtal-trim's description
change in v2
- xtal-trim to uint8
--- .../bindings/net/ieee802154/at86rf230.txt | 27 -------- .../net/ieee802154/atmel,at86rf233.yaml | 66 +++++++++++++++++++ 2 files changed, 66 insertions(+), 27 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt create mode 100644 Documentation/devicetree/bindings/net/ieee802154/atmel,at86rf233.yaml
Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt deleted +0 -27
@@ -1,27 +0,0 @@ -* AT86RF230 IEEE 802.15.4 * - -Required properties: - - compatible: should be "atmel,at86rf230", "atmel,at86rf231", - "atmel,at86rf233" or "atmel,at86rf212" - - spi-max-frequency: maximal bus speed, should be set to 7500000 depends - sync or async operation mode - - reg: the chipselect index - - interrupts: the interrupt generated by the device. Non high-level - can occur deadlocks while handling isr. - -Optional properties: - - reset-gpio: GPIO spec for the rstn pin - - sleep-gpio: GPIO spec for the slp_tr pin - - xtal-trim: u8 value for fine tuning the internal capacitance - arrays of xtal pins: 0 = +0 pF, 0xf = +4.5 pF - -Example: - - at86rf231@0 { - compatible = "atmel,at86rf231"; - spi-max-frequency = <7500000>; - reg = <0>; - interrupts = <19 4>; - interrupt-parent = <&gpio3>; - xtal-trim = /bits/ 8 <0x06>; - };
Documentation/devicetree/bindings/net/ieee802154/atmel,at86rf233.yaml new file +66 -0
66 lines not on this page · raw message
Signature · 1 line
2.34.1
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Hello:
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Quoted 10 lines · On Thu, 24 Jul 2025 19:01:24 -0400 you wrote:
Convert at86rf230.txt yaml format.
Additional changes:
- Add ref tospi-peripheral-props.yaml.
- Add parent spi node in examples.Reviewed-by Rob Herring (Arm) <[email protected]>Signed-off-by Frank Li <[email protected]>[...]
Here is the summary with links:
- [RESEND,v3,1/1] dt-bindings: ieee802154: Convert at86rf230.txt yaml format
https://git.kernel.org/netdev/net-next/c/d7e0d327805b
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html