Skip to contentSkip to conversation

dt-bindings: ieee802154: Convert at86rf230.txt yaml format

PATCH Superseded Frank Li 2 participants 2 messages Jun 2, 2025 – Jun 6, 2025

Subsystems (5)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Frank Li

author maintainer
#0 lore raw

PATCH v2 1/1 dt-bindings: ieee802154: Convert at86rf230.txt yaml format

Convert at86rf230.txt yaml format.

Additional changes:
- Add ref to spi-peripheral-props.yaml.
- Add parent spi node in examples.

---
change in v2
- xtal-trim to uint8

---
 .../bindings/net/ieee802154/at86rf230.txt     | 27 --------
 .../net/ieee802154/atmel,at86rf233.yaml       | 65 +++++++++++++++++++
 2 files changed, 65 insertions(+), 27 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt
 create mode 100644 Documentation/devicetree/bindings/net/ieee802154/atmel,at86rf233.yaml
Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt deleted +0 -27
deleted file mode 100644
index 168f1be509126..0000000000000
@@ -1,27 +0,0 @@
-* AT86RF230 IEEE 802.15.4 *
-
-Required properties:
-  - compatible:		should be "atmel,at86rf230", "atmel,at86rf231",
-			"atmel,at86rf233" or "atmel,at86rf212"
-  - spi-max-frequency:	maximal bus speed, should be set to 7500000 depends
-			sync or async operation mode
-  - reg:		the chipselect index
-  - interrupts:		the interrupt generated by the device. Non high-level
-			can occur deadlocks while handling isr.
-
-Optional properties:
-  - reset-gpio:		GPIO spec for the rstn pin
-  - sleep-gpio:		GPIO spec for the slp_tr pin
-  - xtal-trim:		u8 value for fine tuning the internal capacitance
-			arrays of xtal pins: 0 = +0 pF, 0xf = +4.5 pF
-
-Example:
-
-	at86rf231@0 {
-		compatible = "atmel,at86rf231";
-		spi-max-frequency = <7500000>;
-		reg = <0>;
-		interrupts = <19 4>;
-		interrupt-parent = <&gpio3>;
-		xtal-trim = /bits/ 8 <0x06>;
-	};
Documentation/devicetree/bindings/net/ieee802154/atmel,at86rf233.yaml new file +65 -0

65 lines not on this page · raw message

Signature · 1 line
2.34.1
maintainer
#1 lore raw
Quoted 85 lines · Frank Li

Convert at86rf230.txt yaml format.

Additional changes:
- Add ref to spi-peripheral-props.yaml.
- Add parent spi node in examples.

---
change in v2
- xtal-trim to uint8

---
 .../bindings/net/ieee802154/at86rf230.txt     | 27 --------
 .../net/ieee802154/atmel,at86rf233.yaml       | 65 +++++++++++++++++++
 2 files changed, 65 insertions(+), 27 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt
 create mode 100644 Documentation/devicetree/bindings/net/ieee802154/atmel,at86rf233.yaml
Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt deleted +0 -27
deleted file mode 100644
index 168f1be509126..0000000000000
@@ -1,27 +0,0 @@
-* AT86RF230 IEEE 802.15.4 *
-
-Required properties:
-  - compatible:		should be "atmel,at86rf230", "atmel,at86rf231",
-			"atmel,at86rf233" or "atmel,at86rf212"
-  - spi-max-frequency:	maximal bus speed, should be set to 7500000 depends
-			sync or async operation mode
-  - reg:		the chipselect index
-  - interrupts:		the interrupt generated by the device. Non high-level
-			can occur deadlocks while handling isr.
-
-Optional properties:
-  - reset-gpio:		GPIO spec for the rstn pin
-  - sleep-gpio:		GPIO spec for the slp_tr pin
-  - xtal-trim:		u8 value for fine tuning the internal capacitance
-			arrays of xtal pins: 0 = +0 pF, 0xf = +4.5 pF
-
-Example:
-
-	at86rf231@0 {
-		compatible = "atmel,at86rf231";
-		spi-max-frequency = <7500000>;
-		reg = <0>;
-		interrupts = <19 4>;
-		interrupt-parent = <&gpio3>;
-		xtal-trim = /bits/ 8 <0x06>;
-	};
Documentation/devicetree/bindings/net/ieee802154/atmel,at86rf233.yaml new file +29 -0
new file mode 100644
index 0000000000000..d84e05c133710
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ieee802154/atmel,at86rf233.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AT86RF230 IEEE 802.15.4
+
+maintainers:
+  - Frank Li <[email protected]>
+
+properties:
+  compatible:
+    enum:
+      - atmel,at86rf212
+      - atmel,at86rf230
+      - atmel,at86rf231
+      - atmel,at86rf233
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpio:
+    maxItems: 1
+
+  sleep-gpio:

Documentation/devicetree/bindings/net/ieee802154/atmel,at86rf233.yaml line 39

Quoted 10 lines
Documentation/devicetree/bindings/net/ieee802154/atmel,at86rf233.yaml new file +10 -0
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 7500000
+
+  xtal-trim:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      u8 value for fine tuning the internal capacitance
+      arrays of xtal pins: 0 = +0 pF, 0xf = +4.5 pF

Drop 'u8 value for '

maximum: 0xf

Quoted 29 lines
Documentation/devicetree/bindings/net/ieee802154/atmel,at86rf233.yaml new file +26 -0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        zigbee@0 {
+            compatible = "atmel,at86rf231";
+            reg = <0>;
+            spi-max-frequency = <7500000>;
+            interrupts = <19 4>;
+            interrupt-parent = <&gpio3>;
+            xtal-trim = /bits/ 8 <0x06>;
+        };
+    };
Signature · 1 line
2.34.1