obexd: client: Fix connect RX MTU
PATCH 1/1 obexd: client: Fix connect RX MTU
OBEX download from iPhone is currently slow due to small packet size used to transfer data which doesn't follow the MTU negotiated during L2CAP connection, i.e. 672 bytes instead of 32767:
< ACL Data TX: Handle 11 flags 0x00 dlen 12
L2CAP: Connection Request (0x02) ident 18 len 4
PSM: 4103 (0x1007)
Source CID: 72Quoted 1 line
ACL Data RX: Handle 11 flags
0x02dlen 16
L2CAP: Connection Response (0x03) ident 18 len 8
Destination CID: 14608
Source CID: 72
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 11 flags 0x00 dlen 27
L2CAP: Configure Request (0x04) ident 20 len 19
Destination CID: 14608
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009Quoted 1 line
ACL Data RX: Handle 11 flags
0x02dlen 26
L2CAP: Configure Request (0x04) ident 72 len 18
Destination CID: 72
Flags: 0x0000
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 65527
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
< ACL Data TX: Handle 11 flags 0x00 dlen 29
L2CAP: Configure Response (0x05) ident 72 len 21
Source CID: 14608
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 672
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009Quoted 1 line
ACL Data RX: Handle 11 flags
0x02dlen 32
L2CAP: Configure Response (0x05) ident 20 len 24
Source CID: 72
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
...
< ACL Data TX: Handle 11 flags 0x00 dlen 34
Channel: 14608 len 30 ctrl 0x0000 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 0 ReqSeq 0
00 00 80 00 1a 10 00 02 a0 46 00 13 71 63 dd 54 .........F..qc.T
4a 7e 11 e2 b4 7c 00 50 c2 49 00 48 b4 55 J~...|.P.I.H.U...
Quoted 1 line
ACL Data RX: Handle 11 flags
0x02dlen 680
Channel: 72 len 676 ctrl 0x0202 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 1 ReqSeq 2
< ACL Data TX: Handle 11 flags 0x00 dlen 13
Channel: 14608 len 9 ctrl 0x0204 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 2 ReqSeq 2
Quoted 1 line
ACL Data RX: Handle 11 flags
0x02dlen 680
Channel: 72 len 676 ctrl 0x0304 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 2 ReqSeq 3
The OBEX CONNECT request uses the negotiated output MTU (672, 0x02a0) as the maximum OBEX packet length the client is able to receive instead of the negotiated input MTU (32767).
This commit swap rx_mtu and tx_mtu as g_obex_new() is defined as:
GObex *g_obex_new(GIOChannel *io, GObexTransportType transport_type,
gssize rx_mtu, gssize tx_mtu); --- obexd/client/session.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
obexd/client/session.c +1 -1
@@ -373,7 +373,7 @@ static void transport_func(GIOChannel *io, GError *err, gpointer user_data)else type =G_OBEX_TRANSPORT_STREAM ; - obex =g_obex_new (io, type, tx_mtu, rx_mtu); + obex =g_obex_new (io, type, rx_mtu, tx_mtu);if (obex ==NULL ) goto done;
Signature · 1 line
2.43.0
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=995586
---Test result---
Test Summary:
CheckPatch PENDING 0.36 seconds GitLint PENDING 0.29 seconds BuildEll PASS 20.06 seconds BluezMake PASS 2614.40 seconds MakeCheck PASS 19.93 seconds MakeDistcheck PASS 182.12 seconds CheckValgrind PASS 233.99 seconds CheckSmatch PASS 304.90 seconds bluezmakeextell PASS 126.83 seconds IncrementalBuild PENDING 0.30 seconds ScanBuild PASS 898.83 seconds
Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script
Output:
##############################
Test: GitLint - PENDING
Desc: Run gitlint
Output:
##############################
Test: IncrementalBuild - PENDING
Desc: Incremental build with the patches in the series Output:
---
Regards,
Linux Bluetooth
This patch was applied to bluetooth/bluez.git (master) by Luiz Augusto von Dentz <[email protected]>:
Hello:
This patch was applied to bluetooth/bluez.git (master) by Luiz Augusto von Dentz <[email protected]>:
Quoted 83 lines · On Tue, 26 Aug 2025 11:05:43 +0200 you wrote:
OBEX download from iPhone is currently slow due to small packet size used to transfer data which doesn't follow the MTU negotiated during L2CAP connection, i.e. 672 bytes instead of 32767:
< ACL Data TX: Handle 11 flags
0x00dlen 12L2CAP: Connection Request (0x02) ident 18 len 4 PSM: 4103 (0x1007) Source CID: 72Quoted 1 line
ACL Data RX: Handle 11 flags
0x02dlen 16L2CAP: Connection Response (0x03) ident 18 len 8 Destination CID: 14608 Source CID: 72 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 11 flags 0x00 dlen 27 L2CAP: Configure Request (0x04) ident 20 len 19 Destination CID: 14608 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 32767 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Enhanced Retransmission (0x03) TX window size: 63 Max transmit: 3 Retransmission timeout: 2000 Monitor timeout: 12000 Maximum PDU size: 1009Quoted 1 line
ACL Data RX: Handle 11 flags
0x02dlen 26L2CAP: Configure Request (0x04) ident 72 len 18 Destination CID: 72 Flags: 0x0000 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Enhanced Retransmission (0x03) TX window size: 32 Max transmit: 255 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 65527 Option: Frame Check Sequence (0x05) [mandatory] FCS: 16-bit FCS (0x01) < ACL Data TX: Handle 11 flags 0x00 dlen 29 L2CAP: Configure Response (0x05) ident 72 len 21 Source CID: 14608 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Enhanced Retransmission (0x03) TX window size: 32 Max transmit: 255 Retransmission timeout: 2000 Monitor timeout: 12000 Maximum PDU size: 1009Quoted 1 line
ACL Data RX: Handle 11 flags
0x02dlen 32L2CAP: Configure Response (0x05) ident 20 len 24 Source CID: 72 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 32767 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Enhanced Retransmission (0x03) TX window size: 63 Max transmit: 3 Retransmission timeout: 2000 Monitor timeout: 12000 Maximum PDU size: 1009 Option: Frame Check Sequence (0x05) [mandatory] FCS: 16-bit FCS (0x01) ... < ACL Data TX: Handle 11 flags 0x00 dlen 34 Channel: 14608 len 30 ctrl 0x0000 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8} I-frame: Unsegmented TxSeq 0 ReqSeq 0 00 00 80 00 1a 10 00 02 a0 46 00 13 71 63 dd 54 .........F..qc.T 4a 7e 11 e2 b4 7c 00 50 c2 49 00 48 b4 55 J~...|.P.I.H.U...
Quoted 1 line
ACL Data RX: Handle 11 flags
0x02dlen 680Channel: 72 len 676 ctrl
0x0202[PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 1 ReqSeq 2
< ACL Data TX: Handle 11 flags0x00dlen 13
Channel: 14608 len 9 ctrl0x0204[PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 2 ReqSeq 2
Quoted 5 lines
Quoted 1 line
ACL Data RX: Handle 11 flags
0x02dlen 680Channel: 72 len 676 ctrl
0x0304[PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 2 ReqSeq 3[...]
Here is the summary with links:
- [BlueZ] obexd: client: Fix connect RX MTU
https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=99abc8a9e1e1
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html