Skip to contentSkip to conversation

perf vendor events riscv: Add CVA6 JSON file

PATCH Superseded Manuel Hernández | OPENCHIP 4 participants 6 messages Dec 2, 2025 – Mar 24

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 perf vendor events riscv: Add CVA6 JSON file

From: Manuel Hernández Méndez <[email protected]>

This patch add the CVA6 JSON file.

---
 tools/perf/pmu-events/arch/riscv/mapfile.csv  |  1 +
 .../arch/riscv/openhwgroup/cva6/firmware.json | 68 +++++++++++++++++++
 .../riscv/openhwgroup/cva6/instructions.json  | 42 ++++++++++++
 .../arch/riscv/openhwgroup/cva6/memory.json   | 52 ++++++++++++++
 .../riscv/openhwgroup/cva6/microarch.json     | 22 ++++++
 5 files changed, 185 insertions(+)
 create mode 100755 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/firmware.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/memory.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/microarch.json
tools/perf/pmu-events/arch/riscv/mapfile.csv +1 -0
index d5eea7f9aa9a..87cfb0e0849f 100644
@@ -21,5 +21,6 @@
 0x489-0x8000000000000[1-6]08-0x[9b][[:xdigit:]]+,v1,sifive/p650,core
 0x5b7-0x0-0x0,v1,thead/c900-legacy,core
 0x5b7-0x80000000090c0d00-0x2047000,v1,thead/c900-legacy,core
+0x602-0x3-0x0,v1,openhwgroup/cva6,core
 0x67e-0x80000000db0000[89]0-0x[[:xdigit:]]+,v1,starfive/dubhe-80,core
 0x31e-0x8000000000008a45-0x[[:xdigit:]]+,v1,andes/ax45,core
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/firmware.json new file +68 -0

68 lines not on this page · raw message

tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json new file +42 -0

42 lines not on this page · raw message

tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/memory.json new file +52 -0

52 lines not on this page · raw message

tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/microarch.json new file +22 -0
new file mode 100644
index 000000000000..58fe0d04133e
@@ -0,0 +1,22 @@
+[
+  {
+    "EventName": "BRANCH_MISPREDICTS",
+    "EventCode": "0xA",
+    "BriefDescription": "number of branch mispredictions"
+  },
+  {
+    "EventName": "BRANCH_EXCEPTIONS",
+    "EventCode": "0xB",
+    "BriefDescription": "number of valid branch exceptions"
+  },
+  {
+    "EventName": "MSB_FULL",
+    "EventCode": "0xE",
+    "BriefDescription": "scoreboard is full"
+  },
+  {
+    "EventName": "PIPELINE_STALL",
+    "EventCode": "0x16",
+    "BriefDescription": "number of cycles the pipeline is stalled during read operands"
+  }
+]
Signature · 1 line
2.34.1
reviewer
#1 lore raw
Quoted 135 lines · Manuel Hernández | OPENCHIP

From: Manuel Hernández Méndez <[email protected]>

This patch add the CVA6 JSON file.

---
 tools/perf/pmu-events/arch/riscv/mapfile.csv  |  1 +
 .../arch/riscv/openhwgroup/cva6/firmware.json | 68 +++++++++++++++++++
 .../riscv/openhwgroup/cva6/instructions.json  | 42 ++++++++++++
 .../arch/riscv/openhwgroup/cva6/memory.json   | 52 ++++++++++++++
 .../riscv/openhwgroup/cva6/microarch.json     | 22 ++++++
 5 files changed, 185 insertions(+)
 create mode 100755 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/firmware.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/memory.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/microarch.json
tools/perf/pmu-events/arch/riscv/mapfile.csv +1 -0
index d5eea7f9aa9a..87cfb0e0849f 100644
@@ -21,5 +21,6 @@
 0x489-0x8000000000000[1-6]08-0x[9b][[:xdigit:]]+,v1,sifive/p650,core
 0x5b7-0x0-0x0,v1,thead/c900-legacy,core
 0x5b7-0x80000000090c0d00-0x2047000,v1,thead/c900-legacy,core
+0x602-0x3-0x0,v1,openhwgroup/cva6,core
 0x67e-0x80000000db0000[89]0-0x[[:xdigit:]]+,v1,starfive/dubhe-80,core
 0x31e-0x8000000000008a45-0x[[:xdigit:]]+,v1,andes/ax45,core
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/firmware.json new file +68 -0
new file mode 100755
index 000000000000..7149caec4f80
@@ -0,0 +1,68 @@
+[
+  {
+    "ArchStdEvent": "FW_MISALIGNED_LOAD"
+  },
+  {
+    "ArchStdEvent": "FW_MISALIGNED_STORE"
+  },
+  {
+    "ArchStdEvent": "FW_ACCESS_LOAD"
+  },
+  {
+    "ArchStdEvent": "FW_ACCESS_STORE"
+  },
+  {
+    "ArchStdEvent": "FW_ILLEGAL_INSN"
+  },
+  {
+    "ArchStdEvent": "FW_SET_TIMER"
+  },
+  {
+    "ArchStdEvent": "FW_IPI_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_IPI_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_FENCE_I_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_FENCE_I_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_SFENCE_VMA_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_SFENCE_VMA_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_SFENCE_VMA_ASID_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_SFENCE_VMA_ASID_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_GVMA_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_GVMA_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_GVMA_VMID_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_GVMA_VMID_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_VVMA_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_VVMA_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_VVMA_ASID_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_VVMA_ASID_RECEIVED"
+  }
+]
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json new file +26 -0
new file mode 100644
index 000000000000..3652970cde8b
@@ -0,0 +1,42 @@
+[
+  {
+    "EventName": "EXCEPTIONS",
+    "EventCode": "0x7",
+    "BriefDescription": "valid exceptions encountered"
+  },
+  {
+    "EventName": "EXCEPTION_HANDLER_RETURNS",
+    "EventCode": "0x8",
+    "BriefDescription": "return from an exception"
+  },
+  {
+    "EventName": "BRANCH_INSTRUCTIONS",
+    "EventCode": "0x9",
+    "BriefDescription": "number of branch instructions encountered"
+  },
+  {
+    "EventName": "CALL",
+    "EventCode": "0xC",
+    "BriefDescription": "number of call instructions"
+  },
+  {
+    "EventName": "RETURN",
+    "EventCode": "0xD",
+    "BriefDescription": "number of return instructions"
+  },

tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json line 36

Quoted 10 lines
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json new file +10 -0
+  {
+    "EventName": "INSTRUCTION_FETCH_EMPTY",
+    "EventCode": "0xF",
+    "BriefDescription": "number of invalid instructions in IF"
+  },
+  {
+    "EventName": "INTEGER_INSTRUCTIONS",
+    "EventCode": "0x14",
+    "BriefDescription": "number of integer instructions"
+  },

Is this retired instructions or does it also include speculative instructions? Perhaps you could add a little more detail to the descriptions.

Thanks,
Ian

Quoted 95 lines
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json new file +6 -0
+  {
+    "EventName": "FLOATING_POINT_INSTRUCTIONS",
+    "EventCode": "0x15",
+    "BriefDescription": "number of floating point instructions"
+  }
+]
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/memory.json new file +52 -0
new file mode 100644
index 000000000000..4509ecfc7bc0
@@ -0,0 +1,52 @@
+[
+  {
+    "EventName": "L1_I_CACHE_MISSES",
+    "EventCode": "0x1",
+    "BriefDescription": "number of misses in L1 I-Cache"
+  },
+  {
+    "EventName": "L1_D_CACHE_MISSES",
+    "EventCode": "0x2",
+    "BriefDescription": "number of misses in L1 D-Cache"
+  },
+  {
+    "EventName": "ITLB_MISSES",
+    "EventCode": "0x3",
+    "BriefDescription": "number of misses in ITLB"
+  },
+  {
+    "EventName": "DTLB_MISSES",
+    "EventCode": "0x4",
+    "BriefDescription": "number of misses in DTLB"
+  },
+  {
+    "EventName": "LOAD_ACCESSES",
+    "EventCode": "0x5",
+    "BriefDescription": "number of data memory loads"
+  },
+  {
+    "EventName": "STORE_ACCESSES",
+    "EventCode": "0x6",
+    "BriefDescription": "number of data memory stores"
+  },
+  {
+    "EventName": "L1_I_CACHE_ACCESSES",
+    "EventCode": "0x10",
+    "BriefDescription": "number of accesses to instruction cache"
+  },
+  {
+    "EventName": "L1_D_CACHE_ACCESSES",
+    "EventCode": "0x11",
+    "BriefDescription": "number of accesses to data cache"
+  },
+  {
+    "EventName": "L1_CACHE_LINE_EVICTION",
+    "EventCode": "0x12",
+    "BriefDescription": "number of data cache line eviction"
+  },
+  {
+    "EventName": "ITLB_FLUSH",
+    "EventCode": "0x13",
+    "BriefDescription": "number of ITLB flushes"
+  }
+]
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/microarch.json new file +22 -1
new file mode 100644
index 000000000000..58fe0d04133e
@@ -0,0 +1,22 @@
+[
+  {
+    "EventName": "BRANCH_MISPREDICTS",
+    "EventCode": "0xA",
+    "BriefDescription": "number of branch mispredictions"
+  },
+  {
+    "EventName": "BRANCH_EXCEPTIONS",
+    "EventCode": "0xB",
+    "BriefDescription": "number of valid branch exceptions"
+  },
+  {
+    "EventName": "MSB_FULL",
+    "EventCode": "0xE",
+    "BriefDescription": "scoreboard is full"
+  },
+  {
+    "EventName": "PIPELINE_STALL",
+    "EventCode": "0x16",
+    "BriefDescription": "number of cycles the pipeline is stalled during read operands"
+  }
+]
--

2.34.1

#2 lore raw

PATCH v2 1/1 perf vendor events riscv: Add CVA6 JSON file

From: Manuel Hernández Méndez <[email protected]>

This patch add the CVA6 JSON file.

---
Hi Ian, thanks for the review.

This is the second version of the patch, following a review of the CVA6 core PMU implementation.

Thanks!
Manuel
---
Changes in v2:
- Added a clarification about retired instructions in name and description fields
- Moved and renamed LOAD_ACCESSES and STORE_ACCESSES events from memory.json to instructions.json
- Moved INSTRUCTION_FETCH_EMPTY event from instructions.json to microarch.json
- Changed mode from 755 to 644 in firmware.json file

v1:
https://lore.kernel.org/all/[email protected]/

---
 tools/perf/pmu-events/arch/riscv/mapfile.csv  |  1 +
 .../arch/riscv/openhwgroup/cva6/firmware.json | 68 +++++++++++++++++++
 .../riscv/openhwgroup/cva6/instructions.json  | 47 +++++++++++++
 .../arch/riscv/openhwgroup/cva6/memory.json   | 42 ++++++++++++
 .../riscv/openhwgroup/cva6/microarch.json     | 27 ++++++++
 5 files changed, 185 insertions(+)
 create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/firmware.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/memory.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/microarch.json
tools/perf/pmu-events/arch/riscv/mapfile.csv +1 -0
index d5eea7f9aa9a..87cfb0e0849f 100644
@@ -21,5 +21,6 @@
 0x489-0x8000000000000[1-6]08-0x[9b][[:xdigit:]]+,v1,sifive/p650,core
 0x5b7-0x0-0x0,v1,thead/c900-legacy,core
 0x5b7-0x80000000090c0d00-0x2047000,v1,thead/c900-legacy,core
+0x602-0x3-0x0,v1,openhwgroup/cva6,core
 0x67e-0x80000000db0000[89]0-0x[[:xdigit:]]+,v1,starfive/dubhe-80,core
 0x31e-0x8000000000008a45-0x[[:xdigit:]]+,v1,andes/ax45,core
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/firmware.json new file +68 -0

68 lines not on this page · raw message

tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json new file +47 -0

47 lines not on this page · raw message

tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/memory.json new file +42 -0

42 lines not on this page · raw message

tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/microarch.json new file +27 -0
new file mode 100644
index 000000000000..104e6e8197da
@@ -0,0 +1,27 @@
+[
+  {
+    "EventName": "BRANCH_MISPREDICTS",
+    "EventCode": "0xA",
+    "BriefDescription": "number of branch mispredictions"
+  },
+  {
+    "EventName": "BRANCH_EXCEPTIONS",
+    "EventCode": "0xB",
+    "BriefDescription": "number of valid branch exceptions"
+  },
+  {
+    "EventName": "MSB_FULL",
+    "EventCode": "0xE",
+    "BriefDescription": "scoreboard is full"
+  },
+  {
+    "EventName": "INSTRUCTION_FETCH_EMPTY",
+    "EventCode": "0xF",
+    "BriefDescription": "number of invalid instructions in IF stage"
+  },
+  {
+    "EventName": "PIPELINE_STALL",
+    "EventCode": "0x16",
+    "BriefDescription": "number of cycles the pipeline is stalled during read operands"
+  }
+]
Signature · 1 line
2.34.1
reviewer Reviewed-by on v2 1/1
#3 lore raw
Quoted 6 lines · Manuel Hernández | OPENCHIP

From: Manuel Hernández Méndez <[email protected]>

This patch add the CVA6 JSON file.

Thanks,
Ian

Quoted 254 lines

---
Hi Ian, thanks for the review.

This is the second version of the patch, following a review of the CVA6 core PMU implementation.

Thanks!
Manuel
---
Changes in v2:
- Added a clarification about retired instructions in name and description fields
- Moved and renamed LOAD_ACCESSES and STORE_ACCESSES events from memory.json to instructions.json
- Moved INSTRUCTION_FETCH_EMPTY event from instructions.json to microarch.json
- Changed mode from 755 to 644 in firmware.json file

v1:
https://lore.kernel.org/all/[email protected]/

---
 tools/perf/pmu-events/arch/riscv/mapfile.csv  |  1 +
 .../arch/riscv/openhwgroup/cva6/firmware.json | 68 +++++++++++++++++++
 .../riscv/openhwgroup/cva6/instructions.json  | 47 +++++++++++++
 .../arch/riscv/openhwgroup/cva6/memory.json   | 42 ++++++++++++
 .../riscv/openhwgroup/cva6/microarch.json     | 27 ++++++++
 5 files changed, 185 insertions(+)
 create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/firmware.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/memory.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/microarch.json
tools/perf/pmu-events/arch/riscv/mapfile.csv +1 -0
index d5eea7f9aa9a..87cfb0e0849f 100644
@@ -21,5 +21,6 @@
 0x489-0x8000000000000[1-6]08-0x[9b][[:xdigit:]]+,v1,sifive/p650,core
 0x5b7-0x0-0x0,v1,thead/c900-legacy,core
 0x5b7-0x80000000090c0d00-0x2047000,v1,thead/c900-legacy,core
+0x602-0x3-0x0,v1,openhwgroup/cva6,core
 0x67e-0x80000000db0000[89]0-0x[[:xdigit:]]+,v1,starfive/dubhe-80,core
 0x31e-0x8000000000008a45-0x[[:xdigit:]]+,v1,andes/ax45,core
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/firmware.json new file +68 -0
new file mode 100644
index 000000000000..7149caec4f80
@@ -0,0 +1,68 @@
+[
+  {
+    "ArchStdEvent": "FW_MISALIGNED_LOAD"
+  },
+  {
+    "ArchStdEvent": "FW_MISALIGNED_STORE"
+  },
+  {
+    "ArchStdEvent": "FW_ACCESS_LOAD"
+  },
+  {
+    "ArchStdEvent": "FW_ACCESS_STORE"
+  },
+  {
+    "ArchStdEvent": "FW_ILLEGAL_INSN"
+  },
+  {
+    "ArchStdEvent": "FW_SET_TIMER"
+  },
+  {
+    "ArchStdEvent": "FW_IPI_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_IPI_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_FENCE_I_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_FENCE_I_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_SFENCE_VMA_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_SFENCE_VMA_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_SFENCE_VMA_ASID_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_SFENCE_VMA_ASID_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_GVMA_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_GVMA_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_GVMA_VMID_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_GVMA_VMID_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_VVMA_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_VVMA_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_VVMA_ASID_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_VVMA_ASID_RECEIVED"
+  }
+]
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json new file +47 -0
new file mode 100644
index 000000000000..c38f6c97cf1f
@@ -0,0 +1,47 @@
+[
+  {
+    "EventName": "LOAD_INSTRUCTIONS_RETIRED",
+    "EventCode": "0x5",
+    "BriefDescription": "number of data memory load instructions retired"
+  },
+  {
+    "EventName": "STORE_INSTRUCTIONS_RETIRED",
+    "EventCode": "0x6",
+    "BriefDescription": "number of data memory store instructions retired"
+  },
+  {
+    "EventName": "EXCEPTIONS",
+    "EventCode": "0x7",
+    "BriefDescription": "valid exceptions encountered"
+  },
+  {
+    "EventName": "EXCEPTION_HANDLER_RETURNS",
+    "EventCode": "0x8",
+    "BriefDescription": "return from an exception"
+  },
+  {
+    "EventName": "BRANCH_INSTRUCTIONS_RETIRED",
+    "EventCode": "0x9",
+    "BriefDescription": "number of branch instructions encountered retired"
+  },
+  {
+    "EventName": "CALL_INSTRUCTIONS_RETIRED",
+    "EventCode": "0xC",
+    "BriefDescription": "number of call instructions retired"
+  },
+  {
+    "EventName": "RETURN_INSTRUCTIONS_RETIRED",
+    "EventCode": "0xD",
+    "BriefDescription": "number of return instructions retired"
+  },
+  {
+    "EventName": "INTEGER_INSTRUCTIONS_RETIRED",
+    "EventCode": "0x14",
+    "BriefDescription": "number of integer instructions retired"
+  },
+  {
+    "EventName": "FLOATING_POINT_INSTRUCTIONS_RETIRED",
+    "EventCode": "0x15",
+    "BriefDescription": "number of floating point instructions retired"
+  }
+]
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/memory.json new file +42 -0
new file mode 100644
index 000000000000..c4f376a0ee4e
@@ -0,0 +1,42 @@
+[
+  {
+    "EventName": "L1_I_CACHE_MISSES",
+    "EventCode": "0x1",
+    "BriefDescription": "number of misses in L1 I-Cache"
+  },
+  {
+    "EventName": "L1_D_CACHE_MISSES",
+    "EventCode": "0x2",
+    "BriefDescription": "number of misses in L1 D-Cache"
+  },
+  {
+    "EventName": "ITLB_MISSES",
+    "EventCode": "0x3",
+    "BriefDescription": "number of misses in ITLB"
+  },
+  {
+    "EventName": "DTLB_MISSES",
+    "EventCode": "0x4",
+    "BriefDescription": "number of misses in DTLB"
+  },
+  {
+    "EventName": "L1_I_CACHE_ACCESSES",
+    "EventCode": "0x10",
+    "BriefDescription": "number of accesses to instruction cache"
+  },
+  {
+    "EventName": "L1_D_CACHE_ACCESSES",
+    "EventCode": "0x11",
+    "BriefDescription": "number of accesses to data cache"
+  },
+  {
+    "EventName": "L1_CACHE_LINE_EVICTION",
+    "EventCode": "0x12",
+    "BriefDescription": "number of data cache line eviction"
+  },
+  {
+    "EventName": "ITLB_FLUSH",
+    "EventCode": "0x13",
+    "BriefDescription": "number of ITLB flushes"
+  }
+]
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/microarch.json new file +27 -1
new file mode 100644
index 000000000000..104e6e8197da
@@ -0,0 +1,27 @@
+[
+  {
+    "EventName": "BRANCH_MISPREDICTS",
+    "EventCode": "0xA",
+    "BriefDescription": "number of branch mispredictions"
+  },
+  {
+    "EventName": "BRANCH_EXCEPTIONS",
+    "EventCode": "0xB",
+    "BriefDescription": "number of valid branch exceptions"
+  },
+  {
+    "EventName": "MSB_FULL",
+    "EventCode": "0xE",
+    "BriefDescription": "scoreboard is full"
+  },
+  {
+    "EventName": "INSTRUCTION_FETCH_EMPTY",
+    "EventCode": "0xF",
+    "BriefDescription": "number of invalid instructions in IF stage"
+  },
+  {
+    "EventName": "PIPELINE_STALL",
+    "EventCode": "0x16",
+    "BriefDescription": "number of cycles the pipeline is stalled during read operands"
+  }
+]
--

2.34.1

maintainer Applied
#4 lore raw
Quoted 10 lines · Ian Rogers
Quoted 6 lines · Manuel Hernández | OPENCHIP

From: Manuel Hernández Méndez <[email protected]>

This patch add the CVA6 JSON file.

Applied, and added a tad more info to the cset log message:

This patch add the OpenHW Core-V CVA6 Risc-V JSON file.

For more info:

https://openhwfoundation.org/news/2023/11/07/openhw-group-announces-core-v-cva6-platform-project-for-risc-v-software-development-and-testing/

:-)

- Arnaldo

Quoted 257 lines

Thanks,
Ian

Quoted 254 lines

---
Hi Ian, thanks for the review.

This is the second version of the patch, following a review of the CVA6 core PMU implementation.

Thanks!
Manuel
---
Changes in v2:
- Added a clarification about retired instructions in name and description fields
- Moved and renamed LOAD_ACCESSES and STORE_ACCESSES events from memory.json to instructions.json
- Moved INSTRUCTION_FETCH_EMPTY event from instructions.json to microarch.json
- Changed mode from 755 to 644 in firmware.json file

v1:
https://lore.kernel.org/all/[email protected]/

---
 tools/perf/pmu-events/arch/riscv/mapfile.csv  |  1 +
 .../arch/riscv/openhwgroup/cva6/firmware.json | 68 +++++++++++++++++++
 .../riscv/openhwgroup/cva6/instructions.json  | 47 +++++++++++++
 .../arch/riscv/openhwgroup/cva6/memory.json   | 42 ++++++++++++
 .../riscv/openhwgroup/cva6/microarch.json     | 27 ++++++++
 5 files changed, 185 insertions(+)
 create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/firmware.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/memory.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/microarch.json
tools/perf/pmu-events/arch/riscv/mapfile.csv +1 -0
index d5eea7f9aa9a..87cfb0e0849f 100644
@@ -21,5 +21,6 @@
 0x489-0x8000000000000[1-6]08-0x[9b][[:xdigit:]]+,v1,sifive/p650,core
 0x5b7-0x0-0x0,v1,thead/c900-legacy,core
 0x5b7-0x80000000090c0d00-0x2047000,v1,thead/c900-legacy,core
+0x602-0x3-0x0,v1,openhwgroup/cva6,core
 0x67e-0x80000000db0000[89]0-0x[[:xdigit:]]+,v1,starfive/dubhe-80,core
 0x31e-0x8000000000008a45-0x[[:xdigit:]]+,v1,andes/ax45,core
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/firmware.json new file +68 -0
new file mode 100644
index 000000000000..7149caec4f80
@@ -0,0 +1,68 @@
+[
+  {
+    "ArchStdEvent": "FW_MISALIGNED_LOAD"
+  },
+  {
+    "ArchStdEvent": "FW_MISALIGNED_STORE"
+  },
+  {
+    "ArchStdEvent": "FW_ACCESS_LOAD"
+  },
+  {
+    "ArchStdEvent": "FW_ACCESS_STORE"
+  },
+  {
+    "ArchStdEvent": "FW_ILLEGAL_INSN"
+  },
+  {
+    "ArchStdEvent": "FW_SET_TIMER"
+  },
+  {
+    "ArchStdEvent": "FW_IPI_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_IPI_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_FENCE_I_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_FENCE_I_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_SFENCE_VMA_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_SFENCE_VMA_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_SFENCE_VMA_ASID_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_SFENCE_VMA_ASID_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_GVMA_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_GVMA_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_GVMA_VMID_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_GVMA_VMID_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_VVMA_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_VVMA_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_VVMA_ASID_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_VVMA_ASID_RECEIVED"
+  }
+]
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json new file +47 -0
new file mode 100644
index 000000000000..c38f6c97cf1f
@@ -0,0 +1,47 @@
+[
+  {
+    "EventName": "LOAD_INSTRUCTIONS_RETIRED",
+    "EventCode": "0x5",
+    "BriefDescription": "number of data memory load instructions retired"
+  },
+  {
+    "EventName": "STORE_INSTRUCTIONS_RETIRED",
+    "EventCode": "0x6",
+    "BriefDescription": "number of data memory store instructions retired"
+  },
+  {
+    "EventName": "EXCEPTIONS",
+    "EventCode": "0x7",
+    "BriefDescription": "valid exceptions encountered"
+  },
+  {
+    "EventName": "EXCEPTION_HANDLER_RETURNS",
+    "EventCode": "0x8",
+    "BriefDescription": "return from an exception"
+  },
+  {
+    "EventName": "BRANCH_INSTRUCTIONS_RETIRED",
+    "EventCode": "0x9",
+    "BriefDescription": "number of branch instructions encountered retired"
+  },
+  {
+    "EventName": "CALL_INSTRUCTIONS_RETIRED",
+    "EventCode": "0xC",
+    "BriefDescription": "number of call instructions retired"
+  },
+  {
+    "EventName": "RETURN_INSTRUCTIONS_RETIRED",
+    "EventCode": "0xD",
+    "BriefDescription": "number of return instructions retired"
+  },
+  {
+    "EventName": "INTEGER_INSTRUCTIONS_RETIRED",
+    "EventCode": "0x14",
+    "BriefDescription": "number of integer instructions retired"
+  },
+  {
+    "EventName": "FLOATING_POINT_INSTRUCTIONS_RETIRED",
+    "EventCode": "0x15",
+    "BriefDescription": "number of floating point instructions retired"
+  }
+]
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/memory.json new file +42 -0
new file mode 100644
index 000000000000..c4f376a0ee4e
@@ -0,0 +1,42 @@
+[
+  {
+    "EventName": "L1_I_CACHE_MISSES",
+    "EventCode": "0x1",
+    "BriefDescription": "number of misses in L1 I-Cache"
+  },
+  {
+    "EventName": "L1_D_CACHE_MISSES",
+    "EventCode": "0x2",
+    "BriefDescription": "number of misses in L1 D-Cache"
+  },
+  {
+    "EventName": "ITLB_MISSES",
+    "EventCode": "0x3",
+    "BriefDescription": "number of misses in ITLB"
+  },
+  {
+    "EventName": "DTLB_MISSES",
+    "EventCode": "0x4",
+    "BriefDescription": "number of misses in DTLB"
+  },
+  {
+    "EventName": "L1_I_CACHE_ACCESSES",
+    "EventCode": "0x10",
+    "BriefDescription": "number of accesses to instruction cache"
+  },
+  {
+    "EventName": "L1_D_CACHE_ACCESSES",
+    "EventCode": "0x11",
+    "BriefDescription": "number of accesses to data cache"
+  },
+  {
+    "EventName": "L1_CACHE_LINE_EVICTION",
+    "EventCode": "0x12",
+    "BriefDescription": "number of data cache line eviction"
+  },
+  {
+    "EventName": "ITLB_FLUSH",
+    "EventCode": "0x13",
+    "BriefDescription": "number of ITLB flushes"
+  }
+]
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/microarch.json new file +27 -1
new file mode 100644
index 000000000000..104e6e8197da
@@ -0,0 +1,27 @@
+[
+  {
+    "EventName": "BRANCH_MISPREDICTS",
+    "EventCode": "0xA",
+    "BriefDescription": "number of branch mispredictions"
+  },
+  {
+    "EventName": "BRANCH_EXCEPTIONS",
+    "EventCode": "0xB",
+    "BriefDescription": "number of valid branch exceptions"
+  },
+  {
+    "EventName": "MSB_FULL",
+    "EventCode": "0xE",
+    "BriefDescription": "scoreboard is full"
+  },
+  {
+    "EventName": "INSTRUCTION_FETCH_EMPTY",
+    "EventCode": "0xF",
+    "BriefDescription": "number of invalid instructions in IF stage"
+  },
+  {
+    "EventName": "PIPELINE_STALL",
+    "EventCode": "0x16",
+    "BriefDescription": "number of cycles the pipeline is stalled during read operands"
+  }
+]
--

2.34.1

#5 lore raw
In reply to Manuel Hernández | OPENCHIP
This patch was applied to riscv/linux.git (for-next) by Arnaldo Carvalho de Melo <[email protected]>:

Hello:

This patch was applied to riscv/linux.git (for-next) by Arnaldo Carvalho de Melo <[email protected]>:

Quoted 9 lines · On Thu, 4 Dec 2025 16:40:38 +0000 you wrote:

From: Manuel Hernández Méndez <[email protected]>

This patch add the CVA6 JSON file.

---
Hi Ian, thanks for the review.

[...]

Here is the summary with links:
- [v2] perf vendor events riscv: Add CVA6 JSON file

    https://git.kernel.org/riscv/c/240156b25a39

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html