perf vendor events riscv: Add CVA6 JSON file
Subsystems (2)
PATCH 1/1 perf vendor events riscv: Add CVA6 JSON file
From: Manuel Hernández Méndez <[email protected]>
This patch add the CVA6 JSON file.
--- tools/perf/pmu-events/arch/riscv/mapfile.csv | 1 + .../arch/riscv/openhwgroup/cva6/firmware.json | 68 +++++++++++++++++++ .../riscv/openhwgroup/cva6/instructions.json | 42 ++++++++++++ .../arch/riscv/openhwgroup/cva6/memory.json | 52 ++++++++++++++ .../riscv/openhwgroup/cva6/microarch.json | 22 ++++++ 5 files changed, 185 insertions(+) create mode 100755 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/firmware.json create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/memory.json create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/microarch.json
tools/perf/pmu-events/arch/riscv/mapfile.csv +1 -0
@@ -21,5 +21,6 @@ 0x489-0x8000000000000[1-6]08-0x[9b][[:xdigit:]]+,v1,sifive/p650,core 0x5b7-0x0-0x0,v1,thead/c900-legacy,core 0x5b7-0x80000000090c0d00-0x2047000,v1,thead/c900-legacy,core +0x602-0x3-0x0,v1,openhwgroup/cva6,core 0x67e-0x80000000db0000[89]0-0x[[:xdigit:]]+,v1,starfive/dubhe-80,core 0x31e-0x8000000000008a45-0x[[:xdigit:]]+,v1,andes/ax45,core
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/firmware.json new file +68 -0
68 lines not on this page · raw message
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json new file +42 -0
42 lines not on this page · raw message
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/memory.json new file +52 -0
52 lines not on this page · raw message
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/microarch.json new file +22 -0
@@ -0,0 +1,22 @@ +[ + { + "EventName": "BRANCH_MISPREDICTS", + "EventCode": "0xA", + "BriefDescription": "number of branch mispredictions" + }, + { + "EventName": "BRANCH_EXCEPTIONS", + "EventCode": "0xB", + "BriefDescription": "number of valid branch exceptions" + }, + { + "EventName": "MSB_FULL", + "EventCode": "0xE", + "BriefDescription": "scoreboard is full" + }, + { + "EventName": "PIPELINE_STALL", + "EventCode": "0x16", + "BriefDescription": "number of cycles the pipeline is stalled during read operands" + } +]
Signature · 1 line
2.34.1
Ian Rogers
reviewerQuoted 135 lines · Manuel Hernández | OPENCHIP
From: Manuel Hernández Méndez <[email protected]>
This patch add the CVA6 JSON file.
Signed-off-by Manuel Hernández Méndez <[email protected]>--- tools/perf/pmu-events/arch/riscv/mapfile.csv | 1 + .../arch/riscv/openhwgroup/cva6/firmware.json | 68 +++++++++++++++++++ .../riscv/openhwgroup/cva6/instructions.json | 42 ++++++++++++ .../arch/riscv/openhwgroup/cva6/memory.json | 52 ++++++++++++++ .../riscv/openhwgroup/cva6/microarch.json | 22 ++++++ 5 files changed, 185 insertions(+) create mode 100755 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/firmware.json create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/memory.json create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/microarch.jsontools/perf/pmu-events/arch/riscv/mapfile.csv +1
-0@@ -21,5 +21,6 @@ 0x489-0x8000000000000[1-6]08-0x[9b][[:xdigit:]]+,v1,sifive/p650,core 0x5b7-0x0-0x0,v1,thead/c900-legacy,core 0x5b7-0x80000000090c0d00-0x2047000,v1,thead/c900-legacy,core +0x602-0x3-0x0,v1,openhwgroup/cva6,core 0x67e-0x80000000db0000[89]0-0x[[:xdigit:]]+,v1,starfive/dubhe-80,core 0x31e-0x8000000000008a45-0x[[:xdigit:]]+,v1,andes/ax45,coretools/perf/pmu-events/arch/riscv/openhwgroup/cva6/firmware.json new file +68
-0@@ -0,0 +1,68 @@ +[ + { + "ArchStdEvent": "FW_MISALIGNED_LOAD" + }, + { + "ArchStdEvent": "FW_MISALIGNED_STORE" + }, + { + "ArchStdEvent": "FW_ACCESS_LOAD" + }, + { + "ArchStdEvent": "FW_ACCESS_STORE" + }, + { + "ArchStdEvent": "FW_ILLEGAL_INSN" + }, + { + "ArchStdEvent": "FW_SET_TIMER" + }, + { + "ArchStdEvent": "FW_IPI_SENT" + }, + { + "ArchStdEvent": "FW_IPI_RECEIVED" + }, + { + "ArchStdEvent": "FW_FENCE_I_SENT" + }, + { + "ArchStdEvent": "FW_FENCE_I_RECEIVED" + }, + { + "ArchStdEvent": "FW_SFENCE_VMA_SENT" + }, + { + "ArchStdEvent": "FW_SFENCE_VMA_RECEIVED" + }, + { + "ArchStdEvent": "FW_SFENCE_VMA_ASID_SENT" + }, + { + "ArchStdEvent": "FW_SFENCE_VMA_ASID_RECEIVED" + }, + { + "ArchStdEvent": "FW_HFENCE_GVMA_SENT" + }, + { + "ArchStdEvent": "FW_HFENCE_GVMA_RECEIVED" + }, + { + "ArchStdEvent": "FW_HFENCE_GVMA_VMID_SENT" + }, + { + "ArchStdEvent": "FW_HFENCE_GVMA_VMID_RECEIVED" + }, + { + "ArchStdEvent": "FW_HFENCE_VVMA_SENT" + }, + { + "ArchStdEvent": "FW_HFENCE_VVMA_RECEIVED" + }, + { + "ArchStdEvent": "FW_HFENCE_VVMA_ASID_SENT" + }, + { + "ArchStdEvent": "FW_HFENCE_VVMA_ASID_RECEIVED" + } +]tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json new file +26
-0@@ -0,0 +1,42 @@ +[ + { + "EventName": "EXCEPTIONS", + "EventCode": "0x7", + "BriefDescription": "valid exceptions encountered" + }, + { + "EventName": "EXCEPTION_HANDLER_RETURNS", + "EventCode": "0x8", + "BriefDescription": "return from an exception" + }, + { + "EventName": "BRANCH_INSTRUCTIONS", + "EventCode": "0x9", + "BriefDescription": "number of branch instructions encountered" + }, + { + "EventName": "CALL", + "EventCode": "0xC", + "BriefDescription": "number of call instructions" + }, + { + "EventName": "RETURN", + "EventCode": "0xD", + "BriefDescription": "number of return instructions" + },
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json line 36
Quoted 10 lines
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json new file +10
-0+ { + "EventName": "INSTRUCTION_FETCH_EMPTY", + "EventCode": "0xF", + "BriefDescription": "number of invalid instructions in IF" + }, + { + "EventName": "INTEGER_INSTRUCTIONS", + "EventCode": "0x14", + "BriefDescription": "number of integer instructions" + },
Is this retired instructions or does it also include speculative instructions? Perhaps you could add a little more detail to the descriptions.
Thanks,
Ian
Quoted 95 lines
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json new file +6
-0+ { + "EventName": "FLOATING_POINT_INSTRUCTIONS", + "EventCode": "0x15", + "BriefDescription": "number of floating point instructions" + } +]tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/memory.json new file +52
-0@@ -0,0 +1,52 @@ +[ + { + "EventName": "L1_I_CACHE_MISSES", + "EventCode": "0x1", + "BriefDescription": "number of misses in L1 I-Cache" + }, + { + "EventName": "L1_D_CACHE_MISSES", + "EventCode": "0x2", + "BriefDescription": "number of misses in L1 D-Cache" + }, + { + "EventName": "ITLB_MISSES", + "EventCode": "0x3", + "BriefDescription": "number of misses in ITLB" + }, + { + "EventName": "DTLB_MISSES", + "EventCode": "0x4", + "BriefDescription": "number of misses in DTLB" + }, + { + "EventName": "LOAD_ACCESSES", + "EventCode": "0x5", + "BriefDescription": "number of data memory loads" + }, + { + "EventName": "STORE_ACCESSES", + "EventCode": "0x6", + "BriefDescription": "number of data memory stores" + }, + { + "EventName": "L1_I_CACHE_ACCESSES", + "EventCode": "0x10", + "BriefDescription": "number of accesses to instruction cache" + }, + { + "EventName": "L1_D_CACHE_ACCESSES", + "EventCode": "0x11", + "BriefDescription": "number of accesses to data cache" + }, + { + "EventName": "L1_CACHE_LINE_EVICTION", + "EventCode": "0x12", + "BriefDescription": "number of data cache line eviction" + }, + { + "EventName": "ITLB_FLUSH", + "EventCode": "0x13", + "BriefDescription": "number of ITLB flushes" + } +]tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/microarch.json new file +22
-1@@ -0,0 +1,22 @@ +[ + { + "EventName": "BRANCH_MISPREDICTS", + "EventCode": "0xA", + "BriefDescription": "number of branch mispredictions" + }, + { + "EventName": "BRANCH_EXCEPTIONS", + "EventCode": "0xB", + "BriefDescription": "number of valid branch exceptions" + }, + { + "EventName": "MSB_FULL", + "EventCode": "0xE", + "BriefDescription": "scoreboard is full" + }, + { + "EventName": "PIPELINE_STALL", + "EventCode": "0x16", + "BriefDescription": "number of cycles the pipeline is stalled during read operands" + } +] --2.34.1
PATCH v2 1/1 perf vendor events riscv: Add CVA6 JSON file
From: Manuel Hernández Méndez <[email protected]>
This patch add the CVA6 JSON file.
---
Hi Ian, thanks for the review.
This is the second version of the patch, following a review of the CVA6 core PMU implementation.
Thanks!
Manuel
---
Changes in v2:
- Added a clarification about retired instructions in name and description fields
- Moved and renamed LOAD_ACCESSES and STORE_ACCESSES events from memory.json to instructions.json
- Moved INSTRUCTION_FETCH_EMPTY event from instructions.json to microarch.json
- Changed mode from 755 to 644 in firmware.json file
v1:
https://lore.kernel.org/all/[email protected]/
--- tools/perf/pmu-events/arch/riscv/mapfile.csv | 1 + .../arch/riscv/openhwgroup/cva6/firmware.json | 68 +++++++++++++++++++ .../riscv/openhwgroup/cva6/instructions.json | 47 +++++++++++++ .../arch/riscv/openhwgroup/cva6/memory.json | 42 ++++++++++++ .../riscv/openhwgroup/cva6/microarch.json | 27 ++++++++ 5 files changed, 185 insertions(+) create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/firmware.json create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/memory.json create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/microarch.json
tools/perf/pmu-events/arch/riscv/mapfile.csv +1 -0
@@ -21,5 +21,6 @@ 0x489-0x8000000000000[1-6]08-0x[9b][[:xdigit:]]+,v1,sifive/p650,core 0x5b7-0x0-0x0,v1,thead/c900-legacy,core 0x5b7-0x80000000090c0d00-0x2047000,v1,thead/c900-legacy,core +0x602-0x3-0x0,v1,openhwgroup/cva6,core 0x67e-0x80000000db0000[89]0-0x[[:xdigit:]]+,v1,starfive/dubhe-80,core 0x31e-0x8000000000008a45-0x[[:xdigit:]]+,v1,andes/ax45,core
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/firmware.json new file +68 -0
68 lines not on this page · raw message
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json new file +47 -0
47 lines not on this page · raw message
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/memory.json new file +42 -0
42 lines not on this page · raw message
tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/microarch.json new file +27 -0
@@ -0,0 +1,27 @@ +[ + { + "EventName": "BRANCH_MISPREDICTS", + "EventCode": "0xA", + "BriefDescription": "number of branch mispredictions" + }, + { + "EventName": "BRANCH_EXCEPTIONS", + "EventCode": "0xB", + "BriefDescription": "number of valid branch exceptions" + }, + { + "EventName": "MSB_FULL", + "EventCode": "0xE", + "BriefDescription": "scoreboard is full" + }, + { + "EventName": "INSTRUCTION_FETCH_EMPTY", + "EventCode": "0xF", + "BriefDescription": "number of invalid instructions in IF stage" + }, + { + "EventName": "PIPELINE_STALL", + "EventCode": "0x16", + "BriefDescription": "number of cycles the pipeline is stalled during read operands" + } +]
Signature · 1 line
2.34.1
Quoted 6 lines · Manuel Hernández | OPENCHIP
From: Manuel Hernández Méndez <[email protected]>
This patch add the CVA6 JSON file.
Signed-off-by Manuel Hernández Méndez <[email protected]>
Thanks,
Ian
Quoted 254 lines
---
Hi Ian, thanks for the review.This is the second version of the patch, following a review of the CVA6 core PMU implementation.
Thanks!
Manuel
---
Changes in v2:
- Added a clarification about retired instructions in name and description fields
- Moved and renamedLOAD_ACCESSESandSTORE_ACCESSESevents from memory.json to instructions.json
- MovedINSTRUCTION_FETCH_EMPTYevent from instructions.json to microarch.json
- Changed mode from 755 to 644 in firmware.json filev1:
https://lore.kernel.org/all/[email protected]/--- tools/perf/pmu-events/arch/riscv/mapfile.csv | 1 + .../arch/riscv/openhwgroup/cva6/firmware.json | 68 +++++++++++++++++++ .../riscv/openhwgroup/cva6/instructions.json | 47 +++++++++++++ .../arch/riscv/openhwgroup/cva6/memory.json | 42 ++++++++++++ .../riscv/openhwgroup/cva6/microarch.json | 27 ++++++++ 5 files changed, 185 insertions(+) create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/firmware.json create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/memory.json create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/microarch.jsontools/perf/pmu-events/arch/riscv/mapfile.csv +1
-0@@ -21,5 +21,6 @@ 0x489-0x8000000000000[1-6]08-0x[9b][[:xdigit:]]+,v1,sifive/p650,core 0x5b7-0x0-0x0,v1,thead/c900-legacy,core 0x5b7-0x80000000090c0d00-0x2047000,v1,thead/c900-legacy,core +0x602-0x3-0x0,v1,openhwgroup/cva6,core 0x67e-0x80000000db0000[89]0-0x[[:xdigit:]]+,v1,starfive/dubhe-80,core 0x31e-0x8000000000008a45-0x[[:xdigit:]]+,v1,andes/ax45,coretools/perf/pmu-events/arch/riscv/openhwgroup/cva6/firmware.json new file +68
-0@@ -0,0 +1,68 @@ +[ + { + "ArchStdEvent": "FW_MISALIGNED_LOAD" + }, + { + "ArchStdEvent": "FW_MISALIGNED_STORE" + }, + { + "ArchStdEvent": "FW_ACCESS_LOAD" + }, + { + "ArchStdEvent": "FW_ACCESS_STORE" + }, + { + "ArchStdEvent": "FW_ILLEGAL_INSN" + }, + { + "ArchStdEvent": "FW_SET_TIMER" + }, + { + "ArchStdEvent": "FW_IPI_SENT" + }, + { + "ArchStdEvent": "FW_IPI_RECEIVED" + }, + { + "ArchStdEvent": "FW_FENCE_I_SENT" + }, + { + "ArchStdEvent": "FW_FENCE_I_RECEIVED" + }, + { + "ArchStdEvent": "FW_SFENCE_VMA_SENT" + }, + { + "ArchStdEvent": "FW_SFENCE_VMA_RECEIVED" + }, + { + "ArchStdEvent": "FW_SFENCE_VMA_ASID_SENT" + }, + { + "ArchStdEvent": "FW_SFENCE_VMA_ASID_RECEIVED" + }, + { + "ArchStdEvent": "FW_HFENCE_GVMA_SENT" + }, + { + "ArchStdEvent": "FW_HFENCE_GVMA_RECEIVED" + }, + { + "ArchStdEvent": "FW_HFENCE_GVMA_VMID_SENT" + }, + { + "ArchStdEvent": "FW_HFENCE_GVMA_VMID_RECEIVED" + }, + { + "ArchStdEvent": "FW_HFENCE_VVMA_SENT" + }, + { + "ArchStdEvent": "FW_HFENCE_VVMA_RECEIVED" + }, + { + "ArchStdEvent": "FW_HFENCE_VVMA_ASID_SENT" + }, + { + "ArchStdEvent": "FW_HFENCE_VVMA_ASID_RECEIVED" + } +]tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json new file +47
-0@@ -0,0 +1,47 @@ +[ + { + "EventName": "LOAD_INSTRUCTIONS_RETIRED", + "EventCode": "0x5", + "BriefDescription": "number of data memory load instructions retired" + }, + { + "EventName": "STORE_INSTRUCTIONS_RETIRED", + "EventCode": "0x6", + "BriefDescription": "number of data memory store instructions retired" + }, + { + "EventName": "EXCEPTIONS", + "EventCode": "0x7", + "BriefDescription": "valid exceptions encountered" + }, + { + "EventName": "EXCEPTION_HANDLER_RETURNS", + "EventCode": "0x8", + "BriefDescription": "return from an exception" + }, + { + "EventName": "BRANCH_INSTRUCTIONS_RETIRED", + "EventCode": "0x9", + "BriefDescription": "number of branch instructions encountered retired" + }, + { + "EventName": "CALL_INSTRUCTIONS_RETIRED", + "EventCode": "0xC", + "BriefDescription": "number of call instructions retired" + }, + { + "EventName": "RETURN_INSTRUCTIONS_RETIRED", + "EventCode": "0xD", + "BriefDescription": "number of return instructions retired" + }, + { + "EventName": "INTEGER_INSTRUCTIONS_RETIRED", + "EventCode": "0x14", + "BriefDescription": "number of integer instructions retired" + }, + { + "EventName": "FLOATING_POINT_INSTRUCTIONS_RETIRED", + "EventCode": "0x15", + "BriefDescription": "number of floating point instructions retired" + } +]tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/memory.json new file +42
-0@@ -0,0 +1,42 @@ +[ + { + "EventName": "L1_I_CACHE_MISSES", + "EventCode": "0x1", + "BriefDescription": "number of misses in L1 I-Cache" + }, + { + "EventName": "L1_D_CACHE_MISSES", + "EventCode": "0x2", + "BriefDescription": "number of misses in L1 D-Cache" + }, + { + "EventName": "ITLB_MISSES", + "EventCode": "0x3", + "BriefDescription": "number of misses in ITLB" + }, + { + "EventName": "DTLB_MISSES", + "EventCode": "0x4", + "BriefDescription": "number of misses in DTLB" + }, + { + "EventName": "L1_I_CACHE_ACCESSES", + "EventCode": "0x10", + "BriefDescription": "number of accesses to instruction cache" + }, + { + "EventName": "L1_D_CACHE_ACCESSES", + "EventCode": "0x11", + "BriefDescription": "number of accesses to data cache" + }, + { + "EventName": "L1_CACHE_LINE_EVICTION", + "EventCode": "0x12", + "BriefDescription": "number of data cache line eviction" + }, + { + "EventName": "ITLB_FLUSH", + "EventCode": "0x13", + "BriefDescription": "number of ITLB flushes" + } +]tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/microarch.json new file +27
-1@@ -0,0 +1,27 @@ +[ + { + "EventName": "BRANCH_MISPREDICTS", + "EventCode": "0xA", + "BriefDescription": "number of branch mispredictions" + }, + { + "EventName": "BRANCH_EXCEPTIONS", + "EventCode": "0xB", + "BriefDescription": "number of valid branch exceptions" + }, + { + "EventName": "MSB_FULL", + "EventCode": "0xE", + "BriefDescription": "scoreboard is full" + }, + { + "EventName": "INSTRUCTION_FETCH_EMPTY", + "EventCode": "0xF", + "BriefDescription": "number of invalid instructions in IF stage" + }, + { + "EventName": "PIPELINE_STALL", + "EventCode": "0x16", + "BriefDescription": "number of cycles the pipeline is stalled during read operands" + } +] --2.34.1
Quoted 10 lines · Ian Rogers
Quoted 6 lines · Manuel Hernández | OPENCHIP
From: Manuel Hernández Méndez <[email protected]>
This patch add the CVA6 JSON file.
Signed-off-by Manuel Hernández Méndez <[email protected]>Reviewed-by Ian Rogers <[email protected]>
Applied, and added a tad more info to the cset log message:
This patch add the OpenHW Core-V CVA6 Risc-V JSON file.
For more info:
:-)
- Arnaldo
Quoted 257 lines
Thanks,
IanQuoted 254 lines
---
Hi Ian, thanks for the review.This is the second version of the patch, following a review of the CVA6 core PMU implementation.
Thanks!
Manuel
---
Changes in v2:
- Added a clarification about retired instructions in name and description fields
- Moved and renamedLOAD_ACCESSESandSTORE_ACCESSESevents from memory.json to instructions.json
- MovedINSTRUCTION_FETCH_EMPTYevent from instructions.json to microarch.json
- Changed mode from 755 to 644 in firmware.json filev1:
https://lore.kernel.org/all/[email protected]/--- tools/perf/pmu-events/arch/riscv/mapfile.csv | 1 + .../arch/riscv/openhwgroup/cva6/firmware.json | 68 +++++++++++++++++++ .../riscv/openhwgroup/cva6/instructions.json | 47 +++++++++++++ .../arch/riscv/openhwgroup/cva6/memory.json | 42 ++++++++++++ .../riscv/openhwgroup/cva6/microarch.json | 27 ++++++++ 5 files changed, 185 insertions(+) create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/firmware.json create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/memory.json create mode 100644 tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/microarch.jsontools/perf/pmu-events/arch/riscv/mapfile.csv +1
-0@@ -21,5 +21,6 @@ 0x489-0x8000000000000[1-6]08-0x[9b][[:xdigit:]]+,v1,sifive/p650,core 0x5b7-0x0-0x0,v1,thead/c900-legacy,core 0x5b7-0x80000000090c0d00-0x2047000,v1,thead/c900-legacy,core +0x602-0x3-0x0,v1,openhwgroup/cva6,core 0x67e-0x80000000db0000[89]0-0x[[:xdigit:]]+,v1,starfive/dubhe-80,core 0x31e-0x8000000000008a45-0x[[:xdigit:]]+,v1,andes/ax45,coretools/perf/pmu-events/arch/riscv/openhwgroup/cva6/firmware.json new file +68
-0@@ -0,0 +1,68 @@ +[ + { + "ArchStdEvent": "FW_MISALIGNED_LOAD" + }, + { + "ArchStdEvent": "FW_MISALIGNED_STORE" + }, + { + "ArchStdEvent": "FW_ACCESS_LOAD" + }, + { + "ArchStdEvent": "FW_ACCESS_STORE" + }, + { + "ArchStdEvent": "FW_ILLEGAL_INSN" + }, + { + "ArchStdEvent": "FW_SET_TIMER" + }, + { + "ArchStdEvent": "FW_IPI_SENT" + }, + { + "ArchStdEvent": "FW_IPI_RECEIVED" + }, + { + "ArchStdEvent": "FW_FENCE_I_SENT" + }, + { + "ArchStdEvent": "FW_FENCE_I_RECEIVED" + }, + { + "ArchStdEvent": "FW_SFENCE_VMA_SENT" + }, + { + "ArchStdEvent": "FW_SFENCE_VMA_RECEIVED" + }, + { + "ArchStdEvent": "FW_SFENCE_VMA_ASID_SENT" + }, + { + "ArchStdEvent": "FW_SFENCE_VMA_ASID_RECEIVED" + }, + { + "ArchStdEvent": "FW_HFENCE_GVMA_SENT" + }, + { + "ArchStdEvent": "FW_HFENCE_GVMA_RECEIVED" + }, + { + "ArchStdEvent": "FW_HFENCE_GVMA_VMID_SENT" + }, + { + "ArchStdEvent": "FW_HFENCE_GVMA_VMID_RECEIVED" + }, + { + "ArchStdEvent": "FW_HFENCE_VVMA_SENT" + }, + { + "ArchStdEvent": "FW_HFENCE_VVMA_RECEIVED" + }, + { + "ArchStdEvent": "FW_HFENCE_VVMA_ASID_SENT" + }, + { + "ArchStdEvent": "FW_HFENCE_VVMA_ASID_RECEIVED" + } +]tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/instructions.json new file +47
-0@@ -0,0 +1,47 @@ +[ + { + "EventName": "LOAD_INSTRUCTIONS_RETIRED", + "EventCode": "0x5", + "BriefDescription": "number of data memory load instructions retired" + }, + { + "EventName": "STORE_INSTRUCTIONS_RETIRED", + "EventCode": "0x6", + "BriefDescription": "number of data memory store instructions retired" + }, + { + "EventName": "EXCEPTIONS", + "EventCode": "0x7", + "BriefDescription": "valid exceptions encountered" + }, + { + "EventName": "EXCEPTION_HANDLER_RETURNS", + "EventCode": "0x8", + "BriefDescription": "return from an exception" + }, + { + "EventName": "BRANCH_INSTRUCTIONS_RETIRED", + "EventCode": "0x9", + "BriefDescription": "number of branch instructions encountered retired" + }, + { + "EventName": "CALL_INSTRUCTIONS_RETIRED", + "EventCode": "0xC", + "BriefDescription": "number of call instructions retired" + }, + { + "EventName": "RETURN_INSTRUCTIONS_RETIRED", + "EventCode": "0xD", + "BriefDescription": "number of return instructions retired" + }, + { + "EventName": "INTEGER_INSTRUCTIONS_RETIRED", + "EventCode": "0x14", + "BriefDescription": "number of integer instructions retired" + }, + { + "EventName": "FLOATING_POINT_INSTRUCTIONS_RETIRED", + "EventCode": "0x15", + "BriefDescription": "number of floating point instructions retired" + } +]tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/memory.json new file +42
-0@@ -0,0 +1,42 @@ +[ + { + "EventName": "L1_I_CACHE_MISSES", + "EventCode": "0x1", + "BriefDescription": "number of misses in L1 I-Cache" + }, + { + "EventName": "L1_D_CACHE_MISSES", + "EventCode": "0x2", + "BriefDescription": "number of misses in L1 D-Cache" + }, + { + "EventName": "ITLB_MISSES", + "EventCode": "0x3", + "BriefDescription": "number of misses in ITLB" + }, + { + "EventName": "DTLB_MISSES", + "EventCode": "0x4", + "BriefDescription": "number of misses in DTLB" + }, + { + "EventName": "L1_I_CACHE_ACCESSES", + "EventCode": "0x10", + "BriefDescription": "number of accesses to instruction cache" + }, + { + "EventName": "L1_D_CACHE_ACCESSES", + "EventCode": "0x11", + "BriefDescription": "number of accesses to data cache" + }, + { + "EventName": "L1_CACHE_LINE_EVICTION", + "EventCode": "0x12", + "BriefDescription": "number of data cache line eviction" + }, + { + "EventName": "ITLB_FLUSH", + "EventCode": "0x13", + "BriefDescription": "number of ITLB flushes" + } +]tools/perf/pmu-events/arch/riscv/openhwgroup/cva6/microarch.json new file +27
-1@@ -0,0 +1,27 @@ +[ + { + "EventName": "BRANCH_MISPREDICTS", + "EventCode": "0xA", + "BriefDescription": "number of branch mispredictions" + }, + { + "EventName": "BRANCH_EXCEPTIONS", + "EventCode": "0xB", + "BriefDescription": "number of valid branch exceptions" + }, + { + "EventName": "MSB_FULL", + "EventCode": "0xE", + "BriefDescription": "scoreboard is full" + }, + { + "EventName": "INSTRUCTION_FETCH_EMPTY", + "EventCode": "0xF", + "BriefDescription": "number of invalid instructions in IF stage" + }, + { + "EventName": "PIPELINE_STALL", + "EventCode": "0x16", + "BriefDescription": "number of cycles the pipeline is stalled during read operands" + } +] --2.34.1
This patch was applied to riscv/linux.git (for-next) by Arnaldo Carvalho de Melo <[email protected]>:
Hello:
This patch was applied to riscv/linux.git (for-next) by Arnaldo Carvalho de Melo <[email protected]>:
Quoted 9 lines · On Thu, 4 Dec 2025 16:40:38 +0000 you wrote:
From: Manuel Hernández Méndez <[email protected]>
This patch add the CVA6 JSON file.
Signed-off-by Manuel Hernández Méndez <[email protected]>---
Hi Ian, thanks for the review.[...]
Here is the summary with links:
- [v2] perf vendor events riscv: Add CVA6 JSON file
https://git.kernel.org/riscv/c/240156b25a39
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html