Skip to contentSkip to conversation

dpll: add frequency monitoring feature

PATCH Applied Ivan Vecera 2 participants 5 messages Apr 2 – Apr 4

Subsystems (6)
lore
Share & tools
lore

Ivan Vecera

author maintainer
#0 lore raw

v4 cover dpll: add frequency monitoring feature

This series adds support for monitoring the measured input frequency of DPLL input pins via the DPLL netlink interface.

Some DPLL devices can measure the actual frequency being received on input pins. The approach mirrors the existing phase-offset-monitor
feature: a device-level attribute (DPLL_A_FREQUENCY_MONITOR) enables or disables monitoring, and a per-pin attribute (DPLL_A_PIN_MEASURED_FREQUENCY) exposes the measured frequency in millihertz (mHz) when monitoring is enabled.

Patch 1 adds the new attributes to the DPLL netlink spec (dpll.yaml), the DPLL_PIN_MEASURED_FREQUENCY_DIVIDER constant, regenerates the auto-generated UAPI header and netlink policy, and updates Documentation/driver-api/dpll.rst.

Patch 2 adds the callback operations (freq_monitor_get/set for devices, measured_freq_get for pins) and the corresponding netlink GET/SET handlers in the DPLL core. The core only invokes measured_freq_get when the frequency monitor is enabled on the parent device. The freq_monitor_get callback is required when measured_freq_get is provided.

Patch 3 implements the feature in the ZL3073x driver by extracting a common measurement latch helper from the existing FFO update path, adding a frequency measurement function, and wiring up the new callbacks.

Changes v3 -> v4:
- Moved freq_monitor_{g,s}et validation from netlink to pin registration with WARN_ON (Vadim)

Changes v2 -> v3:
- Improved frequency-monitor doc wording (Jakub)
- Changed measured-frequency to mHz with divider constant (Jakub)
- Made freq_monitor_get required when measured_freq_get is present (Jakub)

Changes v1 -> v2:
- Renamed actual-frequency to measured-frequency (Vadim)

Ivan Vecera (3):
dpll: add frequency monitoring to netlink spec
dpll: add frequency monitoring callback ops
dpll: zl3073x: implement frequency monitoring

 Documentation/driver-api/dpll.rst     |  20 ++++++
 Documentation/netlink/specs/dpll.yaml |  35 +++++++++
 drivers/dpll/dpll_core.c              |   5 +-
 drivers/dpll/dpll_netlink.c           |  90 +++++++++++++++++++++++
 drivers/dpll/dpll_nl.c                |   5 +-
 drivers/dpll/zl3073x/core.c           |  88 +++++++++++++++++++----
 drivers/dpll/zl3073x/dpll.c           | 100 ++++++++++++++++++++++++--
 drivers/dpll/zl3073x/dpll.h           |   2 +
 drivers/dpll/zl3073x/ref.h            |  14 ++++
 include/linux/dpll.h                  |  10 +++
 include/uapi/linux/dpll.h             |   5 +-
 11 files changed, 353 insertions(+), 21 deletions(-)
Signature · 1 line
2.52.0
author maintainer
#1 lore raw

PATCH v4 1/3 dpll: add frequency monitoring to netlink spec

Add DPLL_A_FREQUENCY_MONITOR device attribute to allow control over the frequency monitor feature. The attribute uses the existing dpll_feature_state enum (enable/disable) and is present in both device-get reply and device-set request.

Add DPLL_A_PIN_MEASURED_FREQUENCY pin attribute to expose the measured input frequency in millihertz (mHz). The attribute is present in the pin-get reply. Add DPLL_PIN_MEASURED_FREQUENCY_DIVIDER constant to allow userspace to extract integer and fractional parts.

---
Changes v2 -> v3:
- Improved frequency-monitor doc wording (Jakub)
- Changed measured-frequency to mHz with divider constant (Jakub)

Changes v1 -> v2:
- Renamed actual-frequency to measured-frequency (Vadim)

---
 Documentation/driver-api/dpll.rst     | 20 +++++++++++++++
 Documentation/netlink/specs/dpll.yaml | 35 +++++++++++++++++++++++++++
 drivers/dpll/dpll_nl.c                |  5 ++--
 include/uapi/linux/dpll.h             |  5 +++-
 4 files changed, 62 insertions(+), 3 deletions(-)
Documentation/driver-api/dpll.rst +20 -0
index 83118c728ed90..93c191b2d0898 100644
@@ -250,6 +250,24 @@ in the ``DPLL_A_PIN_PHASE_OFFSET`` attribute.
   ``DPLL_A_PHASE_OFFSET_MONITOR`` attr state of a feature
   =============================== ========================
 
+Frequency monitor
+=================
+
+Some DPLL devices may offer the capability to measure the actual
+frequency of all available input pins. The attribute and current feature state
+shall be included in the response message of the ``DPLL_CMD_DEVICE_GET``
+command for supported DPLL devices. In such cases, users can also control
+the feature using the ``DPLL_CMD_DEVICE_SET`` command by setting the
+``enum dpll_feature_state`` values for the attribute.
+Once enabled the measured input frequency for each input pin shall be
+returned in the ``DPLL_A_PIN_MEASURED_FREQUENCY`` attribute. The value
+is in millihertz (mHz), using ``DPLL_PIN_MEASURED_FREQUENCY_DIVIDER``
+as the divider.
+
+  =============================== ========================
+  ``DPLL_A_FREQUENCY_MONITOR``    attr state of a feature
+  =============================== ========================
+
 Embedded SYNC
 =============
 
@@ -411,6 +429,8 @@ according to attribute purpose.
       ``DPLL_A_PIN_STATE``             attr state of pin on the parent
                                        pin
     ``DPLL_A_PIN_CAPABILITIES``        attr bitmask of pin capabilities
+    ``DPLL_A_PIN_MEASURED_FREQUENCY``  attr measured frequency of
+                                       an input pin in mHz
   ==================================== ==================================
 
   ==================================== =================================
Documentation/netlink/specs/dpll.yaml +35 -0
index 3dd48a32f7837..40465a3d7fc20 100644
@@ -240,6 +240,20 @@ definitions:
       integer part of a measured phase offset value.
       Value of (DPLL_A_PHASE_OFFSET % DPLL_PHASE_OFFSET_DIVIDER) is a
       fractional part of a measured phase offset value.
+  -
+    type: const
+    name: pin-measured-frequency-divider
+    value: 1000
+    doc: |
+      pin measured frequency divider allows userspace to calculate
+      a value of measured input frequency as a fractional value with
+      three digit decimal precision (millihertz).
+      Value of (DPLL_A_PIN_MEASURED_FREQUENCY /
+      DPLL_PIN_MEASURED_FREQUENCY_DIVIDER) is an integer part of
+      a measured frequency value.
+      Value of (DPLL_A_PIN_MEASURED_FREQUENCY %
+      DPLL_PIN_MEASURED_FREQUENCY_DIVIDER) is a fractional part of
+      a measured frequency value.
   -
     type: enum
     name: feature-state
@@ -319,6 +333,13 @@ attribute-sets:
         name: phase-offset-avg-factor
         type: u32
         doc: Averaging factor applied to calculation of reported phase offset.
+      -
+        name: frequency-monitor
+        type: u32
+        enum: feature-state
+        doc: Current or desired state of the frequency monitor feature.
+          If enabled, dpll device shall measure all currently available
+          inputs for their actual input frequency.
   -
     name: pin
     enum-name: dpll_a_pin
@@ -456,6 +477,17 @@ attribute-sets:
           Value is in PPT (parts per trillion, 10^-12).
           Note: This attribute provides higher resolution than the standard
           fractional-frequency-offset (which is in PPM).
+      -
+        name: measured-frequency
+        type: u64
+        doc: |
+          The measured frequency of the input pin in millihertz (mHz).
+          Value of (DPLL_A_PIN_MEASURED_FREQUENCY /
+          DPLL_PIN_MEASURED_FREQUENCY_DIVIDER) is an integer part (Hz)
+          of a measured frequency value.
+          Value of (DPLL_A_PIN_MEASURED_FREQUENCY %
+          DPLL_PIN_MEASURED_FREQUENCY_DIVIDER) is a fractional part
+          of a measured frequency value.
 
   -
     name: pin-parent-device
@@ -544,6 +576,7 @@ operations:
             - type
             - phase-offset-monitor
             - phase-offset-avg-factor
+            - frequency-monitor
 
       dump:
         reply: *dev-attrs
@@ -563,6 +596,7 @@ operations:
             - mode
             - phase-offset-monitor
             - phase-offset-avg-factor
+            - frequency-monitor
     -
       name: device-create-ntf
       doc: Notification about device appearing
@@ -643,6 +677,7 @@ operations:
             - esync-frequency-supported
             - esync-pulse
             - reference-sync
+            - measured-frequency
 
       dump:
         request:
drivers/dpll/dpll_nl.c +3 -2
index a2b22d4921142..1e652340a5d73 100644
@@ -43,11 +43,12 @@ static const struct nla_policy dpll_device_get_nl_policy[DPLL_A_ID + 1] = {
 };
 
 /* DPLL_CMD_DEVICE_SET - do */
-static const struct nla_policy dpll_device_set_nl_policy[DPLL_A_PHASE_OFFSET_AVG_FACTOR + 1] = {
+static const struct nla_policy dpll_device_set_nl_policy[DPLL_A_FREQUENCY_MONITOR + 1] = {
 	[DPLL_A_ID] = { .type = NLA_U32, },
 	[DPLL_A_MODE] = NLA_POLICY_RANGE(NLA_U32, 1, 2),
 	[DPLL_A_PHASE_OFFSET_MONITOR] = NLA_POLICY_MAX(NLA_U32, 1),
 	[DPLL_A_PHASE_OFFSET_AVG_FACTOR] = { .type = NLA_U32, },
+	[DPLL_A_FREQUENCY_MONITOR] = NLA_POLICY_MAX(NLA_U32, 1),
 };
 
 /* DPLL_CMD_PIN_ID_GET - do */
@@ -115,7 +116,7 @@ static const struct genl_split_ops dpll_nl_ops[] = {
 		.doit		= dpll_nl_device_set_doit,
 		.post_doit	= dpll_post_doit,
 		.policy		= dpll_device_set_nl_policy,
-		.maxattr	= DPLL_A_PHASE_OFFSET_AVG_FACTOR,
+		.maxattr	= DPLL_A_FREQUENCY_MONITOR,
 		.flags		= GENL_ADMIN_PERM | GENL_CMD_CAP_DO,
 	},
 	{
include/uapi/linux/dpll.h +4 -1
index de0005f28e5c5..871685f7c353b 100644
@@ -191,7 +191,8 @@ enum dpll_pin_capabilities {
 	DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE = 4,
 };
 
-#define DPLL_PHASE_OFFSET_DIVIDER	1000
+#define DPLL_PHASE_OFFSET_DIVIDER		1000
+#define DPLL_PIN_MEASURED_FREQUENCY_DIVIDER	1000
 
 /**
  * enum dpll_feature_state - Allow control (enable/disable) and status checking
@@ -218,6 +219,7 @@ enum dpll_a {
 	DPLL_A_CLOCK_QUALITY_LEVEL,
 	DPLL_A_PHASE_OFFSET_MONITOR,
 	DPLL_A_PHASE_OFFSET_AVG_FACTOR,
+	DPLL_A_FREQUENCY_MONITOR,
 
 	__DPLL_A_MAX,
 	DPLL_A_MAX = (__DPLL_A_MAX - 1)
@@ -254,6 +256,7 @@ enum dpll_a_pin {
 	DPLL_A_PIN_REFERENCE_SYNC,
 	DPLL_A_PIN_PHASE_ADJUST_GRAN,
 	DPLL_A_PIN_FRACTIONAL_FREQUENCY_OFFSET_PPT,
+	DPLL_A_PIN_MEASURED_FREQUENCY,
 
 	__DPLL_A_PIN_MAX,
 	DPLL_A_PIN_MAX = (__DPLL_A_PIN_MAX - 1)
Signature · 1 line
2.52.0
author maintainer
#2 lore raw

PATCH v4 2/3 dpll: add frequency monitoring callback ops

In reply to Ivan Vecera

Add new callback operations for a dpll device:
- freq_monitor_get(..) - to obtain current state of frequency monitor feature from dpll device,
- freq_monitor_set(..) - to allow feature configuration.

Add new callback operation for a dpll pin:
- measured_freq_get(..) - to obtain the measured frequency in mHz.

Obtain the feature state value using the get callback and provide it to the user if the device driver implements callbacks. The measured_freq_get pin callback is only invoked when the frequency monitor is enabled. The freq_monitor_get device callback is required when measured_freq_get is provided by the driver.

Execute the set callback upon user requests.

---
Changes v3 -> v4:
- Moved freq_monitor_{g,s}et validation from netlink to pin registration with WARN_ON (Vadim)

Changes v2 -> v3:
- Made freq_monitor_get required when measured_freq_get is present (Jakub)

Changes v1 -> v2:
- Renamed actual-frequency to measured-frequency (Vadim)

---
 drivers/dpll/dpll_core.c    |  5 ++-
 drivers/dpll/dpll_netlink.c | 90 +++++++++++++++++++++++++++++++++++++
 include/linux/dpll.h        | 10 +++++
 3 files changed, 104 insertions(+), 1 deletion(-)
drivers/dpll/dpll_core.c +4 -1
index 3f54754cdec4b..cbb635db43210 100644
@@ -876,7 +876,10 @@ dpll_pin_register(struct dpll_device *dpll, struct dpll_pin *pin,
 
 	if (WARN_ON(!ops) ||
 	    WARN_ON(!ops->state_on_dpll_get) ||
-	    WARN_ON(!ops->direction_get))
+	    WARN_ON(!ops->direction_get) ||
+	    WARN_ON(ops->measured_freq_get &&
+		    (!dpll_device_ops(dpll)->freq_monitor_get ||
+		     !dpll_device_ops(dpll)->freq_monitor_set)))
 		return -EINVAL;
 
 	mutex_lock(&dpll_lock);
drivers/dpll/dpll_netlink.c +90 -0

126 lines not on this page · raw message

include/linux/dpll.h +10 -0
index 2ce295b46b8cd..b7277a8b484d2 100644
@@ -52,6 +52,12 @@ struct dpll_device_ops {
 	int (*phase_offset_avg_factor_get)(const struct dpll_device *dpll,
 					   void *dpll_priv, u32 *factor,
 					   struct netlink_ext_ack *extack);
+	int (*freq_monitor_set)(const struct dpll_device *dpll, void *dpll_priv,
+				enum dpll_feature_state state,
+				struct netlink_ext_ack *extack);
+	int (*freq_monitor_get)(const struct dpll_device *dpll, void *dpll_priv,
+				enum dpll_feature_state *state,
+				struct netlink_ext_ack *extack);
 };
 
 struct dpll_pin_ops {
@@ -110,6 +116,10 @@ struct dpll_pin_ops {
 	int (*ffo_get)(const struct dpll_pin *pin, void *pin_priv,
 		       const struct dpll_device *dpll, void *dpll_priv,
 		       s64 *ffo, struct netlink_ext_ack *extack);
+	int (*measured_freq_get)(const struct dpll_pin *pin, void *pin_priv,
+				 const struct dpll_device *dpll,
+				 void *dpll_priv, u64 *measured_freq,
+				 struct netlink_ext_ack *extack);
 	int (*esync_set)(const struct dpll_pin *pin, void *pin_priv,
 			 const struct dpll_device *dpll, void *dpll_priv,
 			 u64 freq, struct netlink_ext_ack *extack);
Signature · 1 line
2.52.0
author maintainer
#3 lore raw

PATCH v4 3/3 dpll: zl3073x: implement frequency monitoring

In reply to Ivan Vecera

Extract common measurement latch logic from zl3073x_ref_ffo_update() into a new zl3073x_ref_freq_meas_latch() helper and add zl3073x_ref_freq_meas_update() that uses it to latch and read absolute input reference frequencies in Hz.

Add meas_freq field to struct zl3073x_ref and the corresponding zl3073x_ref_meas_freq_get() accessor. The measured frequencies are updated periodically alongside the existing FFO measurements.

Add freq_monitor boolean to struct zl3073x_dpll and implement the freq_monitor_set/get device callbacks to enable/disable frequency monitoring via the DPLL netlink interface.

Implement measured_freq_get pin callback for input pins that returns the measured input frequency in mHz.

---
 drivers/dpll/zl3073x/core.c |  88 ++++++++++++++++++++++++++-----
 drivers/dpll/zl3073x/dpll.c | 100 ++++++++++++++++++++++++++++++++++--
 drivers/dpll/zl3073x/dpll.h |   2 +
 drivers/dpll/zl3073x/ref.h  |  14 +++++
 4 files changed, 187 insertions(+), 17 deletions(-)
drivers/dpll/zl3073x/core.c +75 -13
index 6363002d48d46..cb47a5db061aa 100644
@@ -632,22 +632,21 @@ int zl3073x_ref_phase_offsets_update(struct zl3073x_dev *zldev, int channel)
 }
 
 /**
- * zl3073x_ref_ffo_update - update reference fractional frequency offsets
+ * zl3073x_ref_freq_meas_latch - latch reference frequency measurements
  * @zldev: pointer to zl3073x_dev structure
+ * @type: measurement type (ZL_REF_FREQ_MEAS_CTRL_*)
  *
- * The function asks device to update fractional frequency offsets latch
- * registers the latest measured values, reads and stores them into
+ * The function waits for the previous measurement to finish, selects all
+ * references and requests a new measurement of the given type.
  *
  * Return: 0 on success, <0 on error
  */
 static int
-zl3073x_ref_ffo_update(struct zl3073x_dev *zldev)
+zl3073x_ref_freq_meas_latch(struct zl3073x_dev *zldev, u8 type)
 {
-	int i, rc;
+	int rc;
 
-	/* Per datasheet we have to wait for 'ref_freq_meas_ctrl' to be zero
-	 * to ensure that the measured data are coherent.
-	 */
+	/* Wait for previous measurement to finish */
 	rc = zl3073x_poll_zero_u8(zldev, ZL_REG_REF_FREQ_MEAS_CTRL,
 				  ZL_REF_FREQ_MEAS_CTRL);
 	if (rc)
@@ -663,15 +662,64 @@ zl3073x_ref_ffo_update(struct zl3073x_dev *zldev)
 	if (rc)
 		return rc;
 
-	/* Request frequency offset measurement */
-	rc = zl3073x_write_u8(zldev, ZL_REG_REF_FREQ_MEAS_CTRL,
-			      ZL_REF_FREQ_MEAS_CTRL_REF_FREQ_OFF);
+	/* Request measurement */
+	rc = zl3073x_write_u8(zldev, ZL_REG_REF_FREQ_MEAS_CTRL, type);
 	if (rc)
 		return rc;
 
 	/* Wait for finish */
-	rc = zl3073x_poll_zero_u8(zldev, ZL_REG_REF_FREQ_MEAS_CTRL,
-				  ZL_REF_FREQ_MEAS_CTRL);
+	return zl3073x_poll_zero_u8(zldev, ZL_REG_REF_FREQ_MEAS_CTRL,
+				    ZL_REF_FREQ_MEAS_CTRL);
+}
+
+/**
+ * zl3073x_ref_freq_meas_update - update measured input reference frequencies
+ * @zldev: pointer to zl3073x_dev structure
+ *
+ * The function asks device to latch measured input reference frequencies
+ * and stores the results in the ref state.
+ *
+ * Return: 0 on success, <0 on error
+ */
+static int
+zl3073x_ref_freq_meas_update(struct zl3073x_dev *zldev)
+{
+	int i, rc;
+
+	rc = zl3073x_ref_freq_meas_latch(zldev, ZL_REF_FREQ_MEAS_CTRL_REF_FREQ);
+	if (rc)
+		return rc;
+
+	/* Read measured frequencies in Hz (unsigned 32-bit, LSB = 1 Hz) */
+	for (i = 0; i < ZL3073X_NUM_REFS; i++) {
+		u32 value;
+
+		rc = zl3073x_read_u32(zldev, ZL_REG_REF_FREQ(i), &value);
+		if (rc)
+			return rc;
+
+		zldev->ref[i].meas_freq = value;
+	}
+
+	return 0;
+}
+
+/**
+ * zl3073x_ref_ffo_update - update reference fractional frequency offsets
+ * @zldev: pointer to zl3073x_dev structure
+ *
+ * The function asks device to latch the latest measured fractional
+ * frequency offset values, reads and stores them into the ref state.
+ *
+ * Return: 0 on success, <0 on error
+ */
+static int
+zl3073x_ref_ffo_update(struct zl3073x_dev *zldev)
+{
+	int i, rc;
+
+	rc = zl3073x_ref_freq_meas_latch(zldev,
+					 ZL_REF_FREQ_MEAS_CTRL_REF_FREQ_OFF);
 	if (rc)
 		return rc;
 
@@ -714,6 +762,20 @@ zl3073x_dev_periodic_work(struct kthread_work *work)
 		dev_warn(zldev->dev, "Failed to update phase offsets: %pe\n",
 			 ERR_PTR(rc));
 
+	/* Update measured input reference frequencies if any DPLL has
+	 * frequency monitoring enabled.
+	 */
+	list_for_each_entry(zldpll, &zldev->dplls, list) {
+		if (zldpll->freq_monitor) {
+			rc = zl3073x_ref_freq_meas_update(zldev);
+			if (rc)
+				dev_warn(zldev->dev,
+					 "Failed to update measured frequencies: %pe\n",
+					 ERR_PTR(rc));
+			break;
+		}
+	}
+
 	/* Update references' fractional frequency offsets */
 	rc = zl3073x_ref_ffo_update(zldev);
 	if (rc)
drivers/dpll/zl3073x/dpll.c +96 -4

161 lines not on this page · raw message

drivers/dpll/zl3073x/dpll.h +2 -0
index 115ee4f67e7ab..434c32a7db123 100644
@@ -15,6 +15,7 @@
  * @id: DPLL index
  * @check_count: periodic check counter
  * @phase_monitor: is phase offset monitor enabled
+ * @freq_monitor: is frequency monitor enabled
  * @ops: DPLL device operations for this instance
  * @dpll_dev: pointer to registered DPLL device
  * @tracker: tracking object for the acquired reference
@@ -28,6 +29,7 @@ struct zl3073x_dpll {
 	u8				id;
 	u8				check_count;
 	bool				phase_monitor;
+	bool				freq_monitor;
 	struct dpll_device_ops		ops;
 	struct dpll_device		*dpll_dev;
 	dpll_tracker			tracker;
drivers/dpll/zl3073x/ref.h +14 -0
index 06d8d4d97ea26..be16be20dbc7e 100644
@@ -23,6 +23,7 @@ struct zl3073x_dev;
  * @sync_ctrl: reference sync control
  * @config: reference config
  * @ffo: current fractional frequency offset
+ * @meas_freq: measured input frequency in Hz
  * @mon_status: reference monitor status
  */
 struct zl3073x_ref {
@@ -40,6 +41,7 @@ struct zl3073x_ref {
 	);
 	struct_group(stat, /* Status */
 		s64	ffo;
+		u32	meas_freq;
 		u8	mon_status;
 	);
 };
@@ -68,6 +70,18 @@ zl3073x_ref_ffo_get(const struct zl3073x_ref *ref)
 	return ref->ffo;
 }
 
+/**
+ * zl3073x_ref_meas_freq_get - get measured input frequency
+ * @ref: pointer to ref state
+ *
+ * Return: measured input frequency in Hz
+ */
+static inline u32
+zl3073x_ref_meas_freq_get(const struct zl3073x_ref *ref)
+{
+	return ref->meas_freq;
+}
+
 /**
  * zl3073x_ref_freq_get - get given input reference frequency
  * @ref: pointer to ref state
Signature · 1 line
2.52.0
#4 lore raw
In reply to Ivan Vecera
This series was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:

Hello:

This series was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:

Quoted 11 lines · On Thu, 2 Apr 2026 20:40:54 +0200 you wrote:

This series adds support for monitoring the measured input frequency of DPLL input pins via the DPLL netlink interface.

Some DPLL devices can measure the actual frequency being received on input pins. The approach mirrors the existing phase-offset-monitor
feature: a device-level attribute (DPLL_A_FREQUENCY_MONITOR) enables or disables monitoring, and a per-pin attribute (DPLL_A_PIN_MEASURED_FREQUENCY) exposes the measured frequency in millihertz (mHz) when monitoring is enabled.

[...]

Here is the summary with links:
- [v4,1/3] dpll: add frequency monitoring to netlink spec

    https://git.kernel.org/netdev/net-next/c/3fdea79c09d1
  - [v4,2/3] dpll: add frequency monitoring callback ops
    https://git.kernel.org/netdev/net-next/c/15ed91aa84ea
  - [v4,3/3] dpll: zl3073x: implement frequency monitoring
    https://git.kernel.org/netdev/net-next/c/bfc923b64287

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html