Bluetooth: btusb: Add ASUS USB-BT540 and USB-BT600 for Realtek 8761CU
Subsystems (2)
PATCH 1/1 Bluetooth: btusb: Add ASUS USB-BT540 and USB-BT600 for Realtek 8761CU
From: Christoph Zwerschke <[email protected]>
Add the vendor/product IDs (0x0b05, 0x1bef) and (0x0b05, 0x1d70) to the usb_device_id table for the Realtek RTL8761CU-based ASUS USB-BT540 and USB-BT600 adapters. Both bind via the generic Bluetooth class today, so BTUSB_REALTEK is never set and the rtl8761cu firmware is not loaded, leaving the controller non-functional. With the entries the driver loads rtl_bt/rtl8761cu_fw.bin (already shipped by linux-firmware) and the adapters work (tested: A2DP and ASHA).
Similar to commit bc597f0cc44f
("Bluetooth: btusb: Add TP-Link UB600 for Realtek 8761BUV").
Both adapters share the same descriptor layout and differ only in idProduct, hence a single patch adding both entries.
Device info from /sys/kernel/debug/usb/devices:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 22 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=1bef Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Controller C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 23 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=1d70 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Controller C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
--- drivers/bluetooth/btusb.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/bluetooth/btusb.c +6 -0
@@ -856,6 +856,12 @@ static const struct usb_device_id quirks_table[] = { { USB_DEVICE(0x37ad, 0x0600), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + /* Additional Realtek 8761CU Bluetooth devices */ + { USB_DEVICE(0x0b05, 0x1bef), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0b05, 0x1d70), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + /* Additional Realtek 8821AE Bluetooth devices */ { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
Signature · 1 line
2.55.0
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1121637
---Test result---
Test Summary:
CheckPatch FAIL 0.73 seconds VerifyFixes PASS 0.13 seconds VerifySignedoff PASS 0.13 seconds GitLint PASS 0.33 seconds SubjectPrefix PASS 0.12 seconds BuildKernel PASS 25.40 seconds CheckAllWarning PASS 27.82 seconds CheckSparse PASS 26.51 seconds BuildKernel32 PASS 25.30 seconds CheckKernelLLVM SKIP 0.00 seconds TestRunnerSetup PASS 457.52 seconds IncrementalBuild PASS 23.57 seconds
Details
##############################
Test: CheckPatch - FAIL
Desc: Run checkpatch.pl script
Output:
Bluetooth: btusb: Add ASUS USB-BT540 and USB-BT600 for Realtek 8761CU
WARNING: The commit message has 'stable@', perhaps it also needs a 'Fixes:' tag?
total: 0 errors, 1 warnings, 12 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
/github/workspace/src/patch/14664151.patch has style problems, please review.
NOTE: Ignored message types: UNKNOWN_COMMIT_ID
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
##############################
Test: CheckKernelLLVM - SKIP
Desc: Build kernel with LLVM + context analysis
Output:
Clang not found
https://github.com/bluez/bluetooth-next/pull/397
---
Regards,
Linux Bluetooth
Dear Christoph,
Thank you for the patch.
Am 05.07.26 um 01:13 schrieb [email protected]:
Quoted 9 lines
From: Christoph Zwerschke <[email protected]>
Add the vendor/product IDs (
0x0b05,0x1bef) and (0x0b05,0x1d70) to theusb_device_idtable for the Realtek RTL8761CU-based ASUS USB-BT540 and USB-BT600 adapters. Both bind via the generic Bluetooth class today, soBTUSB_REALTEKis never set and the rtl8761cu firmware is not loaded, leaving the controller non-functional. With the entries the driver loads rtl_bt/rtl8761cu_fw.bin (already shipped by linux-firmware) and the adapters work (tested: A2DP and ASHA).
I recommend to make it two patches. (The summary/title would also be shorter then.)
Quoted 85 lines
Similar to commit
bc597f0cc44f
("Bluetooth: btusb: Add TP-Link UB600 for Realtek 8761BUV").Both adapters share the same descriptor layout and differ only in idProduct, hence a single patch adding both entries.
Device info from
/sys/kernel/debug/usb/devices:T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 22 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=1bef Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Controller C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1msT: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 23 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=1d70 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Controller C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1msSigned-off-by Christoph Zwerschke <[email protected]>--- drivers/bluetooth/btusb.c | 6 ++++++ 1 file changed, 6 insertions(+)drivers/bluetooth/btusb.c +0
-0@@ -856,6 +856,12 @@ static const struct usb_device_id quirks_table[] = { { USB_DEVICE(0x37ad, 0x0600), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH },
drivers/bluetooth/btusb.c static const struct usb_device_id quirks_table[] = { · line 867
Quoted 10 lines
drivers/bluetooth/btusb.c +6
-0+/* Additional Realtek 8761CU Bluetooth devices */ + { USB_DEVICE(0x0b05, 0x1bef), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0b05, 0x1d70), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + /* Additional Realtek 8821AE Bluetooth devices */ { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
Either way, this looks good.
Kind regards,
Paul
PATCH v2 1/2 Bluetooth: btusb: Add ASUS USB-BT540 for Realtek 8761CU
In reply to [email protected]From: Christoph Zwerschke <[email protected]>
Add the vendor/product ID (0x0b05, 0x1bef) to the usb_device_id table for the Realtek RTL8761CU-based ASUS USB-BT540 adapter. It binds via the generic Bluetooth class today, so BTUSB_REALTEK is never set and the rtl8761cu firmware is not loaded, leaving the controller non-functional. With the entry the driver loads rtl_bt/rtl8761cu_fw.bin (already shipped by linux-firmware) and the adapter works (tested: A2DP and ASHA).
Similar to commit bc597f0cc44f
("Bluetooth: btusb: Add TP-Link UB600 for Realtek 8761BUV").
Device info from /sys/kernel/debug/usb/devices:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 22 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=1bef Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Controller C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
--- drivers/bluetooth/btusb.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/bluetooth/btusb.c +4 -0
@@ -856,6 +856,10 @@ static const struct usb_device_id quirks_table[] = { { USB_DEVICE(0x37ad, 0x0600), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + /* Additional Realtek 8761CU Bluetooth devices */ + { USB_DEVICE(0x0b05, 0x1bef), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + /* Additional Realtek 8821AE Bluetooth devices */ { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
Signature · 1 line
2.55.0
Re: [PATCH v2 1/2] Bluetooth: btusb: Add ASUS USB-BT540 for Realtek 8761CU
Dear Christoph,
Thank you for sending v2.
Am 05.07.26 um 11:28 schrieb [email protected]:
Quoted 57 lines
From: Christoph Zwerschke <[email protected]>
Add the vendor/product ID (
0x0b05,0x1bef) to theusb_device_idtable for the Realtek RTL8761CU-based ASUS USB-BT540 adapter. It binds via the generic Bluetooth class today, soBTUSB_REALTEKis never set and the rtl8761cu firmware is not loaded, leaving the controller non-functional. With the entry the driver loads rtl_bt/rtl8761cu_fw.bin (already shipped by linux-firmware) and the adapter works (tested: A2DP and ASHA).Similar to commit
bc597f0cc44f
("Bluetooth: btusb: Add TP-Link UB600 for Realtek 8761BUV").Device info from
/sys/kernel/debug/usb/devices:T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 22 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=1bef Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Controller C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1msSigned-off-by Christoph Zwerschke <[email protected]>--- drivers/bluetooth/btusb.c | 4 ++++ 1 file changed, 4 insertions(+)drivers/bluetooth/btusb.c +0
-0
drivers/bluetooth/btusb.c static const struct usb_device_id quirks_table[] = { · line 865
Quoted 10 lines
drivers/bluetooth/btusb.c +4
-0@@ -856,6 +856,10 @@ static const struct usb_device_id quirks_table[] = { { USB_DEVICE(0x37ad, 0x0600), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + /* Additional Realtek 8761CU Bluetooth devices */ + { USB_DEVICE(0x0b05, 0x1bef), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + /* Additional Realtek 8821AE Bluetooth devices */ { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
Kind regards,
Paul
RE: [v2,1/2] Bluetooth: btusb: Add ASUS USB-BT540 for Realtek 8761CU
In reply to [email protected]This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1121736
---Test result---
Test Summary:
CheckPatch FAIL 0.68 seconds VerifyFixes PASS 0.11 seconds VerifySignedoff PASS 0.11 seconds GitLint PASS 0.31 seconds SubjectPrefix PASS 0.10 seconds BuildKernel PASS 24.99 seconds CheckAllWarning PASS 27.90 seconds CheckSparse PASS 26.49 seconds BuildKernel32 PASS 24.34 seconds CheckKernelLLVM SKIP 0.00 seconds TestRunnerSetup PASS 452.51 seconds IncrementalBuild PASS 23.62 seconds
Details
##############################
Test: CheckPatch - FAIL
Desc: Run checkpatch.pl script
Output:
[v2,1/2] Bluetooth: btusb: Add ASUS USB-BT540 for Realtek 8761CU
WARNING: The commit message has 'stable@', perhaps it also needs a 'Fixes:' tag?
total: 0 errors, 1 warnings, 10 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
/github/workspace/src/patch/14664419.patch has style problems, please review.
NOTE: Ignored message types: UNKNOWN_COMMIT_ID
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
##############################
Test: CheckKernelLLVM - SKIP
Desc: Build kernel with LLVM + context analysis
Output:
Clang not found
https://github.com/bluez/bluetooth-next/pull/398
---
Regards,
Linux Bluetooth
Re: [PATCH v2 1/2] Bluetooth: btusb: Add ASUS USB-BT540 for Realtek 8761CU
In reply to [email protected]This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Hello:
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Quoted 10 lines · On Sun, 5 Jul 2026 11:28:56 +0200 you wrote:
From: Christoph Zwerschke <[email protected]>
Add the vendor/product ID (
0x0b05,0x1bef) to theusb_device_idtable for the Realtek RTL8761CU-based ASUS USB-BT540 adapter. It binds via the generic Bluetooth class today, soBTUSB_REALTEKis never set and the rtl8761cu firmware is not loaded, leaving the controller non-functional. With the entry the driver loads rtl_bt/rtl8761cu_fw.bin (already shipped by linux-firmware) and the adapter works (tested: A2DP and ASHA).[...]
Here is the summary with links:
- [v2,1/2] Bluetooth: btusb: Add ASUS USB-BT540 for Realtek 8761CU
https://git.kernel.org/bluetooth/bluetooth-next/c/babd12cf40c8
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html
v2 cover Bluetooth: btusb: Add ASUS USB-BT540 and USB-BT600 for Realtek 8761CU
In reply to [email protected]From: Christoph Zwerschke <[email protected]>
Dear Paul,
thank you for reviewing.
As you recommended, the change is now split into one patch per adapter.
Patch 1 introduces the new "Realtek 8761CU" section (the header comment plus the USB-BT540 entry), patch 2 adds the USB-BT600 entry to that section.
Changes in v2:
- Split the single patch into one patch per adapter, as recommended by Paul Menzel.
Christoph Zwerschke (2):
Bluetooth: btusb: Add ASUS USB-BT540 for Realtek 8761CU
Bluetooth: btusb: Add ASUS USB-BT600 for Realtek 8761CU
drivers/bluetooth/btusb.c | 6 ++++++ 1 file changed, 6 insertions(+)
Signature · 1 line
2.55.0
PATCH v2 2/2 Bluetooth: btusb: Add ASUS USB-BT600 for Realtek 8761CU
In reply to [email protected]From: Christoph Zwerschke <[email protected]>
Add the vendor/product ID (0x0b05, 0x1d70) to the usb_device_id table for the Realtek RTL8761CU-based ASUS USB-BT600 adapter. It binds via the generic Bluetooth class today, so BTUSB_REALTEK is never set and the rtl8761cu firmware is not loaded, leaving the controller non-functional. With the entry the driver loads rtl_bt/rtl8761cu_fw.bin (already shipped by linux-firmware) and the adapter works (tested: A2DP and ASHA).
Similar to commit bc597f0cc44f
("Bluetooth: btusb: Add TP-Link UB600 for Realtek 8761BUV").
Device info from /sys/kernel/debug/usb/devices:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 23 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=1d70 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Controller C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +2 -0
@@ -859,6 +859,8 @@ static const struct usb_device_id quirks_table[] = {/* Additional Realtek 8761CU Bluetooth devices */ { USB_DEVICE(0x0b05, 0x1bef), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0b05, 0x1d70), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, /* Additional Realtek 8821AE Bluetooth devices */ { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
Signature · 1 line
2.55.0
Re: [PATCH v2 2/2] Bluetooth: btusb: Add ASUS USB-BT600 for Realtek 8761CU
Dear Christoph,
Thank you for sending v2.
Am 05.07.26 um 11:28 schrieb [email protected]:
Quoted 57 lines
From: Christoph Zwerschke <[email protected]>
Add the vendor/product ID (
0x0b05,0x1d70) to theusb_device_idtable for the Realtek RTL8761CU-based ASUS USB-BT600 adapter. It binds via the generic Bluetooth class today, soBTUSB_REALTEKis never set and the rtl8761cu firmware is not loaded, leaving the controller non-functional. With the entry the driver loads rtl_bt/rtl8761cu_fw.bin (already shipped by linux-firmware) and the adapter works (tested: A2DP and ASHA).Similar to commit
bc597f0cc44f
("Bluetooth: btusb: Add TP-Link UB600 for Realtek 8761BUV").Device info from
/sys/kernel/debug/usb/devices:T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 23 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=1d70 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Controller C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1msSigned-off-by Christoph Zwerschke <[email protected]>--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)drivers/bluetooth/btusb.c +0
-0
drivers/bluetooth/btusb.c static const struct usb_device_id quirks_table[] = { · line 866
Quoted 8 lines
drivers/bluetooth/btusb.c +2
-0@@ -859,6 +859,8 @@ static const struct usb_device_id quirks_table[] = {/* Additional Realtek 8761CU Bluetooth devices */ { USB_DEVICE(0x0b05, 0x1bef), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0b05, 0x1d70), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, /* Additional Realtek 8821AE Bluetooth devices */ { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
Kind regards,
Paul
This series was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Hello:
This series was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Quoted 11 lines · On Sun, 5 Jul 2026 01:13:12 +0200 you wrote:
From: Christoph Zwerschke <[email protected]>
Add the vendor/product IDs (
0x0b05,0x1bef) and (0x0b05,0x1d70) to theusb_device_idtable for the Realtek RTL8761CU-based ASUS USB-BT540 and USB-BT600 adapters. Both bind via the generic Bluetooth class today, soBTUSB_REALTEKis never set and the rtl8761cu firmware is not loaded, leaving the controller non-functional. With the entries the driver loads rtl_bt/rtl8761cu_fw.bin (already shipped by linux-firmware) and the adapters work (tested: A2DP and ASHA).[...]
Here is the summary with links:
- Bluetooth: btusb: Add ASUS USB-BT540 and USB-BT600 for Realtek 8761CU (no matching commit)
- [v2,2/2] Bluetooth: btusb: Add ASUS USB-BT600 for Realtek 8761CU
https://git.kernel.org/bluetooth/bluetooth-next/c/3928fa44107d
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html