Skip to contentSkip to conversation

Bluetooth: btusb: Add ASUS USB-BT540 and USB-BT600 for Realtek 8761CU

PATCH Superseded [email protected] 4 participants 11 messages Jul 4 – Jul 7

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Bluetooth: btusb: Add ASUS USB-BT540 and USB-BT600 for Realtek 8761CU

From: Christoph Zwerschke <[email protected]>

Add the vendor/product IDs (0x0b05, 0x1bef) and (0x0b05, 0x1d70) to the usb_device_id table for the Realtek RTL8761CU-based ASUS USB-BT540 and USB-BT600 adapters. Both bind via the generic Bluetooth class today, so BTUSB_REALTEK is never set and the rtl8761cu firmware is not loaded, leaving the controller non-functional. With the entries the driver loads rtl_bt/rtl8761cu_fw.bin (already shipped by linux-firmware) and the adapters work (tested: A2DP and ASHA).

Similar to commit bc597f0cc44f
("Bluetooth: btusb: Add TP-Link UB600 for Realtek 8761BUV").

Both adapters share the same descriptor layout and differ only in idProduct, hence a single patch adding both entries.

Device info from /sys/kernel/debug/usb/devices:

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 22 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0b05 ProdID=1bef Rev= 2.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Controller
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 23 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0b05 ProdID=1d70 Rev= 2.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Controller
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
---
 drivers/bluetooth/btusb.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/bluetooth/btusb.c +6 -0
index e9b0b1dcc1d1..9726a007d25a 100644
@@ -856,6 +856,12 @@ static const struct usb_device_id quirks_table[] = {
 	{ USB_DEVICE(0x37ad, 0x0600), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
 
+	/* Additional Realtek 8761CU Bluetooth devices */
+	{ USB_DEVICE(0x0b05, 0x1bef), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0b05, 0x1d70), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+
 	/* Additional Realtek 8821AE Bluetooth devices */
 	{ USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
 	{ USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
Signature · 1 line
2.55.0
#1 lore raw

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1121637

---Test result---

Test Summary:

CheckPatch                    FAIL      0.73 seconds
VerifyFixes                   PASS      0.13 seconds
VerifySignedoff               PASS      0.13 seconds
GitLint                       PASS      0.33 seconds
SubjectPrefix                 PASS      0.12 seconds
BuildKernel                   PASS      25.40 seconds
CheckAllWarning               PASS      27.82 seconds
CheckSparse                   PASS      26.51 seconds
BuildKernel32                 PASS      25.30 seconds
CheckKernelLLVM               SKIP      0.00 seconds
TestRunnerSetup               PASS      457.52 seconds
IncrementalBuild              PASS      23.57 seconds

Details
##############################
Test: CheckPatch - FAIL
Desc: Run checkpatch.pl script
Output:
Bluetooth: btusb: Add ASUS USB-BT540 and USB-BT600 for Realtek 8761CU
WARNING: The commit message has 'stable@', perhaps it also needs a 'Fixes:' tag?

total: 0 errors, 1 warnings, 12 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.

/github/workspace/src/patch/14664151.patch has style problems, please review.

NOTE: Ignored message types: UNKNOWN_COMMIT_ID

NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.

##############################
Test: CheckKernelLLVM - SKIP
Desc: Build kernel with LLVM + context analysis
Output:
Clang not found

https://github.com/bluez/bluetooth-next/pull/397

---
Regards,
Linux Bluetooth

Reviewed-by on v1 1/1
#2 lore raw
In reply to [email protected]

Dear Christoph,

Thank you for the patch.

Am 05.07.26 um 01:13 schrieb [email protected]:

Quoted 9 lines

From: Christoph Zwerschke <[email protected]>

Add the vendor/product IDs (0x0b05, 0x1bef) and (0x0b05, 0x1d70) to the usb_device_id table for the Realtek RTL8761CU-based ASUS USB-BT540 and USB-BT600 adapters. Both bind via the generic Bluetooth class today, so BTUSB_REALTEK is never set and the rtl8761cu firmware is not loaded, leaving the controller non-functional. With the entries the driver loads rtl_bt/rtl8761cu_fw.bin (already shipped by linux-firmware) and the adapters work (tested: A2DP and ASHA).

I recommend to make it two patches. (The summary/title would also be shorter then.)

Quoted 85 lines

Similar to commit bc597f0cc44f
("Bluetooth: btusb: Add TP-Link UB600 for Realtek 8761BUV").

Both adapters share the same descriptor layout and differ only in idProduct, hence a single patch adding both entries.

Device info from /sys/kernel/debug/usb/devices:

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 22 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0b05 ProdID=1bef Rev= 2.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Controller
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 23 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0b05 ProdID=1d70 Rev= 2.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Controller
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
---
  drivers/bluetooth/btusb.c | 6 ++++++
  1 file changed, 6 insertions(+)
drivers/bluetooth/btusb.c +0 -0
index e9b0b1dcc1d1..9726a007d25a 100644
@@ -856,6 +856,12 @@ static const struct usb_device_id quirks_table[] = {
  	{ USB_DEVICE(0x37ad, 0x0600), .driver_info = BTUSB_REALTEK |
  						     BTUSB_WIDEBAND_SPEECH },

drivers/bluetooth/btusb.c static const struct usb_device_id quirks_table[] = { · line 867

Quoted 10 lines
drivers/bluetooth/btusb.c +6 -0
 
+	/* Additional Realtek 8761CU Bluetooth devices */
+	{ USB_DEVICE(0x0b05, 0x1bef), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0b05, 0x1d70), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+
  	/* Additional Realtek 8821AE Bluetooth devices */
  	{ USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
  	{ USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },

Either way, this looks good.

Kind regards,

Paul

#3 lore raw

PATCH v2 1/2 Bluetooth: btusb: Add ASUS USB-BT540 for Realtek 8761CU

In reply to [email protected]

From: Christoph Zwerschke <[email protected]>

Add the vendor/product ID (0x0b05, 0x1bef) to the usb_device_id table for the Realtek RTL8761CU-based ASUS USB-BT540 adapter. It binds via the generic Bluetooth class today, so BTUSB_REALTEK is never set and the rtl8761cu firmware is not loaded, leaving the controller non-functional. With the entry the driver loads rtl_bt/rtl8761cu_fw.bin (already shipped by linux-firmware) and the adapter works (tested: A2DP and ASHA).

Similar to commit bc597f0cc44f
("Bluetooth: btusb: Add TP-Link UB600 for Realtek 8761BUV").

Device info from /sys/kernel/debug/usb/devices:

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 22 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0b05 ProdID=1bef Rev= 2.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Controller
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
---
 drivers/bluetooth/btusb.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/bluetooth/btusb.c +4 -0
index e9b0b1dcc1d1..c15c7ab5bd2e 100644
@@ -856,6 +856,10 @@ static const struct usb_device_id quirks_table[] = {
 	{ USB_DEVICE(0x37ad, 0x0600), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
 
+	/* Additional Realtek 8761CU Bluetooth devices */
+	{ USB_DEVICE(0x0b05, 0x1bef), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+
 	/* Additional Realtek 8821AE Bluetooth devices */
 	{ USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
 	{ USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
Signature · 1 line
2.55.0
Reviewed-by on v2 1/2
#4 lore raw

Re: [PATCH v2 1/2] Bluetooth: btusb: Add ASUS USB-BT540 for Realtek 8761CU

Dear Christoph,

Thank you for sending v2.

Am 05.07.26 um 11:28 schrieb [email protected]:

Quoted 57 lines

From: Christoph Zwerschke <[email protected]>

Add the vendor/product ID (0x0b05, 0x1bef) to the usb_device_id table for the Realtek RTL8761CU-based ASUS USB-BT540 adapter. It binds via the generic Bluetooth class today, so BTUSB_REALTEK is never set and the rtl8761cu firmware is not loaded, leaving the controller non-functional. With the entry the driver loads rtl_bt/rtl8761cu_fw.bin (already shipped by linux-firmware) and the adapter works (tested: A2DP and ASHA).

Similar to commit bc597f0cc44f
("Bluetooth: btusb: Add TP-Link UB600 for Realtek 8761BUV").

Device info from /sys/kernel/debug/usb/devices:

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 22 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0b05 ProdID=1bef Rev= 2.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Controller
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
---
  drivers/bluetooth/btusb.c | 4 ++++
  1 file changed, 4 insertions(+)
drivers/bluetooth/btusb.c +0 -0
index e9b0b1dcc1d1..c15c7ab5bd2e 100644

drivers/bluetooth/btusb.c static const struct usb_device_id quirks_table[] = { · line 865

Quoted 10 lines
drivers/bluetooth/btusb.c +4 -0
@@ -856,6 +856,10 @@ static const struct usb_device_id quirks_table[] = {
  	{ USB_DEVICE(0x37ad, 0x0600), .driver_info = BTUSB_REALTEK |
  						     BTUSB_WIDEBAND_SPEECH },
 
+	/* Additional Realtek 8761CU Bluetooth devices */
+	{ USB_DEVICE(0x0b05, 0x1bef), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+
  	/* Additional Realtek 8821AE Bluetooth devices */
  	{ USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
  	{ USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },

Kind regards,

Paul

#5 lore raw

RE: [v2,1/2] Bluetooth: btusb: Add ASUS USB-BT540 for Realtek 8761CU

In reply to [email protected]

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1121736

---Test result---

Test Summary:

CheckPatch                    FAIL      0.68 seconds
VerifyFixes                   PASS      0.11 seconds
VerifySignedoff               PASS      0.11 seconds
GitLint                       PASS      0.31 seconds
SubjectPrefix                 PASS      0.10 seconds
BuildKernel                   PASS      24.99 seconds
CheckAllWarning               PASS      27.90 seconds
CheckSparse                   PASS      26.49 seconds
BuildKernel32                 PASS      24.34 seconds
CheckKernelLLVM               SKIP      0.00 seconds
TestRunnerSetup               PASS      452.51 seconds
IncrementalBuild              PASS      23.62 seconds

Details
##############################
Test: CheckPatch - FAIL
Desc: Run checkpatch.pl script
Output:
[v2,1/2] Bluetooth: btusb: Add ASUS USB-BT540 for Realtek 8761CU
WARNING: The commit message has 'stable@', perhaps it also needs a 'Fixes:' tag?

total: 0 errors, 1 warnings, 10 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.

/github/workspace/src/patch/14664419.patch has style problems, please review.

NOTE: Ignored message types: UNKNOWN_COMMIT_ID

NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.

##############################
Test: CheckKernelLLVM - SKIP
Desc: Build kernel with LLVM + context analysis
Output:
Clang not found

https://github.com/bluez/bluetooth-next/pull/398

---
Regards,
Linux Bluetooth

#6 lore raw

Re: [PATCH v2 1/2] Bluetooth: btusb: Add ASUS USB-BT540 for Realtek 8761CU

In reply to [email protected]
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:

Hello:

This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:

Quoted 10 lines · On Sun, 5 Jul 2026 11:28:56 +0200 you wrote:

From: Christoph Zwerschke <[email protected]>

Add the vendor/product ID (0x0b05, 0x1bef) to the usb_device_id table for the Realtek RTL8761CU-based ASUS USB-BT540 adapter. It binds via the generic Bluetooth class today, so BTUSB_REALTEK is never set and the rtl8761cu firmware is not loaded, leaving the controller non-functional. With the entry the driver loads rtl_bt/rtl8761cu_fw.bin (already shipped by linux-firmware) and the adapter works (tested: A2DP and ASHA).

[...]

Here is the summary with links:
- [v2,1/2] Bluetooth: btusb: Add ASUS USB-BT540 for Realtek 8761CU
https://git.kernel.org/bluetooth/bluetooth-next/c/babd12cf40c8

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
#7 lore raw

v2 cover Bluetooth: btusb: Add ASUS USB-BT540 and USB-BT600 for Realtek 8761CU

In reply to [email protected]

From: Christoph Zwerschke <[email protected]>

Dear Paul,

thank you for reviewing.

As you recommended, the change is now split into one patch per adapter.

Patch 1 introduces the new "Realtek 8761CU" section (the header comment plus the USB-BT540 entry), patch 2 adds the USB-BT600 entry to that section.

Changes in v2:
- Split the single patch into one patch per adapter, as recommended by Paul Menzel.

Christoph Zwerschke (2):
Bluetooth: btusb: Add ASUS USB-BT540 for Realtek 8761CU
Bluetooth: btusb: Add ASUS USB-BT600 for Realtek 8761CU

 drivers/bluetooth/btusb.c | 6 ++++++
 1 file changed, 6 insertions(+)
Signature · 1 line
2.55.0
#8 lore raw

PATCH v2 2/2 Bluetooth: btusb: Add ASUS USB-BT600 for Realtek 8761CU

In reply to [email protected]

From: Christoph Zwerschke <[email protected]>

Add the vendor/product ID (0x0b05, 0x1d70) to the usb_device_id table for the Realtek RTL8761CU-based ASUS USB-BT600 adapter. It binds via the generic Bluetooth class today, so BTUSB_REALTEK is never set and the rtl8761cu firmware is not loaded, leaving the controller non-functional. With the entry the driver loads rtl_bt/rtl8761cu_fw.bin (already shipped by linux-firmware) and the adapter works (tested: A2DP and ASHA).

Similar to commit bc597f0cc44f
("Bluetooth: btusb: Add TP-Link UB600 for Realtek 8761BUV").

Device info from /sys/kernel/debug/usb/devices:

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 23 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0b05 ProdID=1d70 Rev= 2.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Controller
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +2 -0
index c15c7ab5bd2e..9726a007d25a 100644
@@ -859,6 +859,8 @@ static const struct usb_device_id quirks_table[] = {
 	/* Additional Realtek 8761CU Bluetooth devices */
 	{ USB_DEVICE(0x0b05, 0x1bef), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0b05, 0x1d70), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Additional Realtek 8821AE Bluetooth devices */
 	{ USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
Signature · 1 line
2.55.0
Reviewed-by on v2 2/2
#9 lore raw

Re: [PATCH v2 2/2] Bluetooth: btusb: Add ASUS USB-BT600 for Realtek 8761CU

Dear Christoph,

Thank you for sending v2.

Am 05.07.26 um 11:28 schrieb [email protected]:

Quoted 57 lines

From: Christoph Zwerschke <[email protected]>

Add the vendor/product ID (0x0b05, 0x1d70) to the usb_device_id table for the Realtek RTL8761CU-based ASUS USB-BT600 adapter. It binds via the generic Bluetooth class today, so BTUSB_REALTEK is never set and the rtl8761cu firmware is not loaded, leaving the controller non-functional. With the entry the driver loads rtl_bt/rtl8761cu_fw.bin (already shipped by linux-firmware) and the adapter works (tested: A2DP and ASHA).

Similar to commit bc597f0cc44f
("Bluetooth: btusb: Add TP-Link UB600 for Realtek 8761BUV").

Device info from /sys/kernel/debug/usb/devices:

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 23 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0b05 ProdID=1d70 Rev= 2.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Controller
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
---
  drivers/bluetooth/btusb.c | 2 ++
  1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +0 -0
index c15c7ab5bd2e..9726a007d25a 100644

drivers/bluetooth/btusb.c static const struct usb_device_id quirks_table[] = { · line 866

Quoted 8 lines
drivers/bluetooth/btusb.c +2 -0
@@ -859,6 +859,8 @@ static const struct usb_device_id quirks_table[] = {
  	/* Additional Realtek 8761CU Bluetooth devices */
  	{ USB_DEVICE(0x0b05, 0x1bef), .driver_info = BTUSB_REALTEK |
  						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0b05, 0x1d70), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
 
  	/* Additional Realtek 8821AE Bluetooth devices */
  	{ USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },

Kind regards,

Paul

#10 lore raw
In reply to [email protected]
This series was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:

Hello:

This series was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:

Quoted 11 lines · On Sun, 5 Jul 2026 01:13:12 +0200 you wrote:

From: Christoph Zwerschke <[email protected]>

Add the vendor/product IDs (0x0b05, 0x1bef) and (0x0b05, 0x1d70) to the usb_device_id table for the Realtek RTL8761CU-based ASUS USB-BT540 and USB-BT600 adapters. Both bind via the generic Bluetooth class today, so BTUSB_REALTEK is never set and the rtl8761cu firmware is not loaded, leaving the controller non-functional. With the entries the driver loads rtl_bt/rtl8761cu_fw.bin (already shipped by linux-firmware) and the adapters work (tested: A2DP and ASHA).

[...]

Here is the summary with links:
- Bluetooth: btusb: Add ASUS USB-BT540 and USB-BT600 for Realtek 8761CU (no matching commit)
- [v2,2/2] Bluetooth: btusb: Add ASUS USB-BT600 for Realtek 8761CU

    https://git.kernel.org/bluetooth/bluetooth-next/c/3928fa44107d

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html