Skip to contentSkip to conversation

dt-bindings: mfd: Convert OMAP USB TLL to DT schema

PATCH Applied Eduard Bostina 4 participants 4 messages Jul 8 – Jul 23

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 dt-bindings: mfd: Convert OMAP USB TLL to DT schema

Convert the OMAP HS USB Host TLL bindings to DT schema.

During the conversion, ti,hwmods has been made optional to resolve dtbs_check warnings. Modern OMAP platforms do not require this property, but it is still required for older platforms.

---
 .../devicetree/bindings/mfd/omap-usb-tll.txt  | 27 ----------
 .../devicetree/bindings/mfd/ti,usbhs-tll.yaml | 53 +++++++++++++++++++
 2 files changed, 53 insertions(+), 27 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/omap-usb-tll.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/ti,usbhs-tll.yaml
Documentation/devicetree/bindings/mfd/omap-usb-tll.txt deleted +0 -27
deleted file mode 100644
index c58d70437fce..000000000000
@@ -1,27 +0,0 @@
-OMAP HS USB Host TLL (Transceiver-Less Interface)
-
-Required properties:
-
-- compatible : should be "ti,usbhs-tll"
-- reg : should contain one register range i.e. start and length
-- interrupts : should contain the TLL module's interrupt
-- ti,hwmod : must contain "usb_tll_hs"
-
-Optional properties:
-
-- clocks: a list of phandles and clock-specifier pairs, one for each entry in
-  clock-names.
-
-- clock-names: should include:
-  * "usb_tll_hs_usb_ch0_clk" - USB TLL channel 0 clock
-  * "usb_tll_hs_usb_ch1_clk" - USB TLL channel 1 clock
-  * "usb_tll_hs_usb_ch2_clk" - USB TLL channel 2 clock
-
-Example:
-
-	usbhstll: usbhstll@4a062000 {
-		compatible = "ti,usbhs-tll";
-		reg = <0x4a062000 0x1000>;
-		interrupts = <78>;
-		ti,hwmods = "usb_tll_hs";
-	  };
Documentation/devicetree/bindings/mfd/ti,usbhs-tll.yaml new file +53 -0

53 lines not on this page · raw message

Signature · 1 line
2.43.0
#1 lore raw
Sashiko has reviewed this patch and found no issues. It looks great!
Quoted 7 lines

Convert the OMAP HS USB Host TLL bindings to DT schema.

During the conversion, ti,hwmods has been made optional to resolve dtbs_check warnings. Modern OMAP platforms do not require this property, but it is still required for older platforms.

Sashiko has reviewed this patch and found no issues. It looks great!

Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1
maintainer Reviewed-by on v1 1/1
#2 lore raw
In reply to Eduard Bostina
Quoted 6 lines · Eduard Bostina

Convert the OMAP HS USB Host TLL bindings to DT schema.

During the conversion, ti,hwmods has been made optional to resolve dtbs_check warnings. Modern OMAP platforms do not require this property, but it is still required for older platforms.

Quoted 8 lines
---
 .../devicetree/bindings/mfd/omap-usb-tll.txt  | 27 ----------
 .../devicetree/bindings/mfd/ti,usbhs-tll.yaml | 53 +++++++++++++++++++
 2 files changed, 53 insertions(+), 27 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/omap-usb-tll.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/ti,usbhs-tll.yaml
maintainer Applied
#3 lore raw

Re: (subset) [PATCH] dt-bindings: mfd: Convert OMAP USB TLL to DT schema

In reply to Eduard Bostina
Quoted 8 lines · Eduard Bostina

Convert the OMAP HS USB Host TLL bindings to DT schema.

During the conversion, ti,hwmods has been made optional to resolve dtbs_check warnings. Modern OMAP platforms do not require this property, but it is still required for older platforms.

[...]

Applied, thanks!

[1/1] dt-bindings: mfd: Convert OMAP USB TLL to DT schema

      commit: dcf9d779d4f0d3c52f2949a6bb7cfb5de144c323

--
Lee Jones [李琼斯]