dt-bindings: mfd: Convert OMAP USB TLL to DT schema
Subsystems (2)
PATCH 1/1 dt-bindings: mfd: Convert OMAP USB TLL to DT schema
Convert the OMAP HS USB Host TLL bindings to DT schema.
During the conversion, ti,hwmods has been made optional to resolve dtbs_check warnings. Modern OMAP platforms do not require this property, but it is still required for older platforms.
--- .../devicetree/bindings/mfd/omap-usb-tll.txt | 27 ---------- .../devicetree/bindings/mfd/ti,usbhs-tll.yaml | 53 +++++++++++++++++++ 2 files changed, 53 insertions(+), 27 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/omap-usb-tll.txt create mode 100644 Documentation/devicetree/bindings/mfd/ti,usbhs-tll.yaml
Documentation/devicetree/bindings/mfd/omap-usb-tll.txt deleted +0 -27
@@ -1,27 +0,0 @@ -OMAP HS USB Host TLL (Transceiver-Less Interface) - -Required properties: - -- compatible : should be "ti,usbhs-tll" -- reg : should contain one register range i.e. start and length -- interrupts : should contain the TLL module's interrupt -- ti,hwmod : must contain "usb_tll_hs" - -Optional properties: - -- clocks: a list of phandles and clock-specifier pairs, one for each entry in - clock-names. - -- clock-names: should include: - * "usb_tll_hs_usb_ch0_clk" - USB TLL channel 0 clock - * "usb_tll_hs_usb_ch1_clk" - USB TLL channel 1 clock - * "usb_tll_hs_usb_ch2_clk" - USB TLL channel 2 clock - -Example: - - usbhstll: usbhstll@4a062000 { - compatible = "ti,usbhs-tll"; - reg = <0x4a062000 0x1000>; - interrupts = <78>; - ti,hwmods = "usb_tll_hs"; - };
Documentation/devicetree/bindings/mfd/ti,usbhs-tll.yaml new file +53 -0
53 lines not on this page · raw message
Signature · 1 line
2.43.0
[email protected]
AI reviewSashiko has reviewed this patch and found no issues. It looks great!
Quoted 7 lines
Convert the OMAP HS USB Host TLL bindings to DT schema.
During the conversion, ti,hwmods has been made optional to resolve
dtbs_checkwarnings. Modern OMAP platforms do not require this property, but it is still required for older platforms.Signed-off-by Eduard Bostina <[email protected]>
Sashiko has reviewed this patch and found no issues. It looks great!
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1
Quoted 6 lines · Eduard Bostina
Convert the OMAP HS USB Host TLL bindings to DT schema.
During the conversion, ti,hwmods has been made optional to resolve
dtbs_checkwarnings. Modern OMAP platforms do not require this property, but it is still required for older platforms.
Quoted 8 lines
Signed-off-by Eduard Bostina <[email protected]>--- .../devicetree/bindings/mfd/omap-usb-tll.txt | 27 ---------- .../devicetree/bindings/mfd/ti,usbhs-tll.yaml | 53 +++++++++++++++++++ 2 files changed, 53 insertions(+), 27 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/omap-usb-tll.txt create mode 100644 Documentation/devicetree/bindings/mfd/ti,usbhs-tll.yaml
Re: (subset) [PATCH] dt-bindings: mfd: Convert OMAP USB TLL to DT schema
In reply to Eduard BostinaQuoted 8 lines · Eduard Bostina
Convert the OMAP HS USB Host TLL bindings to DT schema.
During the conversion, ti,hwmods has been made optional to resolve
dtbs_checkwarnings. Modern OMAP platforms do not require this property, but it is still required for older platforms.[...]
Applied, thanks!
[1/1] dt-bindings: mfd: Convert OMAP USB TLL to DT schema
commit: dcf9d779d4f0d3c52f2949a6bb7cfb5de144c323
--
Lee Jones [李琼斯]