Skip to contentSkip to conversation

Installing Linux on an Indy with 1 HD

DISCUSSION Alexander Graefe 4 participants 4 messages Jan 28, 1999 MIPS

lore
Share & tools
lore
#0 lore raw

Hi.

I was wondering if SGI-Linux can be installed as the only OS on an Indy, because I only have one 2GB HD and I want that all for Linux :) (plus I only have IRIX 5.3 without IDO, which makes compiling the necessary GNU-Programs impossible)

Bye,
LeX

Signature · 1 line
Quidquid latine dictum sit, altum viditur.
#1 lore raw
Quoted 4 lines · Alexander Graefe

Hi.

I was wondering if SGI-Linux can be installed as the only OS on an Indy, because I only have one 2GB HD and I want that all for Linux :)

Sure, just boot the kernel over the network like you did on install.

Cheers,

Richard

#2 lore raw
In reply to Alexander Graefe

Er, you can use gcc for most all of your building, as a matter of fact it seems to not comlain about errors even close to as freqentley as the SGI compiler does. Although it's less optimized it's still running....

-----------------------------
Robbie Stone, [email protected]
Serendipity Simplex

On Thu, 28 Jan 1999, Alexander Graefe wrote:

:->Hi.
:->
:->I was wondering if SGI-Linux can be installed as the only OS on an :->Indy, because I only have one 2GB HD and I want that all for Linux :) :->(plus I only have IRIX 5.3 without IDO, which makes compiling the :->necessary GNU-Programs impossible)
:->
:->Bye,
:-> LeX
:->
:->--
:->Quidquid latine dictum sit, altum viditur.
:->

#3 lore raw
Quoted 2 lines

Er, you can use gcc for most all of your building, as a matter of fact it

Actually if you're talking about using gcc under IRIX then IRIX 5.3 doesn't come with the necessary header files to compile anything(*). You need the IDO or IRIX >= 6.5 which Alexander does not posess. Also just to clear up some apparent confusion (which may well be mine rather than Alexanders) in order to install SGI-Linux for Indy you don't actually need to compile anything...

I would also point out that Linux on Indy doesn't support any X11 graphics yet. Swapping from IRIX 5.3 to something text-only could be a bit of a shock... But wait a few months and life could be all xPeaches and xCream :-)

Personally I'd try to find a small (hyper-cheap/free) old SCSI drive (erm, 300-500M would do?) and install on that. Or do like Richard suggested and permanently run your Linux/Indy off a network root drive.

cheers,
robin

(*) except the IRIX kernel. It uses a weirdly lobotomised compiler hidden well away...

--
He'd found that even the people whose job of work was, so to speak, the Universe, didn't really believe in it and were actually quite proud of not knowing what it really was or even if it could theoretically exist.
Robin Humble / http://www.maths.monash.edu.au/~rjh/