Good news for the Initio Miles owners
Hi,
I managed to get the ini9100UW somehow to work.
My system is a 8600/250 with an SCSI and an Ultra SCSI disks on the PCI card.
I can partition, format, copy/erase stuff -> no problem so far, although I'll do some deeper tests (any advice on extensive tests, benchmarking etc ?)
I'm releasing here the (trivial) patch for those who wants to test it as well (UW disks would be cool).
drivers/scsi/i91uscsi.h +2 -2
@@ -649,7 +649,7 @@UCHAR NVM_TargFConfig;/* 1Fh -> Target F configuration */ }NVRAM_SCSI ; -typedef struct _NVRAM { +typedef struct _ini_NVRAM { /*----------header ---------------*/ USHORT NVM_Signature; /* 0,1: Signature */ UCHAR NVM_Size; /* 2: Size of data structure */
@@ -667,7 +667,7 @@UCHAR NVM_reserved[10 ];/* ---------- CheckSum ---------- */ USHORT NVM_CheckSum;/* 0x3E, 0x3F: Checksum of NVRam */ -}NVRAM , *PNVRAM ; +} ini_NVRAM, *PNVRAM ;/* Bios Configuration for nvram->BIOSConfig1 */ #define NBC1_ENABLE 0x01/* BIOS enable */
drivers/scsi/i91uscsi.c +2 -2
@@ -156,8 +156,8 @@static INI_ADPT_STRUCT i91u_adpt[MAX_SUPPORTED_ADAPTERS ];/*NVRAM nvram, *nvramp = &nvram; */ -static NVRAM i91unvram; -static NVRAM *i91unvramp; +static ini_NVRAM i91unvram; +static ini_NVRAM *i91unvramp;
My advice is to keep it as a module, and then do as root "insmod /lib/module/2.2.6/scsi/initio.o".
If not, the order of the HDs will change (sda, sdb etc...) and the system may not boot at all.
Give me feedback !
Signature · 7 lines
Guillaume Laurès - student @ ESIEA (www.esiea.fr) [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]] [[ and http://www.linuxppc.org/ for useful information before posting. ]]
Quoted 3 lines · On Sun, 23 May 1999 [email protected] wrote:
I can partition, format, copy/erase stuff -> no problem so far, although I'll do some deeper tests (any advice on extensive tests, benchmarking etc ?)
10 large copy/erase/repeats at a time for an hour or so, then force an fsck?
Quoted 4 lines
My advice is to keep it as a module, and then do as root "insmod
/lib/module/2.2.6/scsi/initio.o".
If not, the order of the HDs will change (sda, sdb etc...) and the system may not boot at all
That's just due to the search order. For some odd reason, we go by what's attached to what (inito before, mesh, before nc53c94(?)). But if the driver becomes useable and stable, just change your /etc/fstab to reflect the new order. :)
---
Tom Rini (TR1265)
http://gate.crashing.org/~trini/
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]