Skip to contentSkip to conversation

Good news for the Initio Miles owners

PATCH [email protected] 2 participants 2 messages May 23, 1999 SCSI

lore
Share & tools
lore
#0 lore raw

Hi,

I managed to get the ini9100UW somehow to work.
My system is a 8600/250 with an SCSI and an Ultra SCSI disks on the PCI card.

I can partition, format, copy/erase stuff -> no problem so far, although I'll do some deeper tests (any advice on extensive tests, benchmarking etc ?)

I'm releasing here the (trivial) patch for those who wants to test it as well (UW disks would be cool).

drivers/scsi/i91uscsi.h +2 -2
@@ -649,7 +649,7 @@
 	UCHAR NVM_TargFConfig;	/* 1Fh -> Target F configuration */
 } NVRAM_SCSI;
 
-typedef struct _NVRAM {
+typedef struct _ini_NVRAM {
 /*----------header ---------------*/
 	USHORT NVM_Signature;	/* 0,1: Signature */
 	UCHAR NVM_Size;		/* 2:   Size of data structure */
@@ -667,7 +667,7 @@
 	UCHAR NVM_reserved[10];
 	/* ---------- CheckSum ----------       */
 	USHORT NVM_CheckSum;	/* 0x3E, 0x3F: Checksum of NVRam        */
-} NVRAM, *PNVRAM;
+} ini_NVRAM, *PNVRAM;
 
 /* Bios Configuration for nvram->BIOSConfig1                            */
 #define NBC1_ENABLE             0x01	/* BIOS enable                  */
drivers/scsi/i91uscsi.c +2 -2
@@ -156,8 +156,8 @@
 static INI_ADPT_STRUCT i91u_adpt[MAX_SUPPORTED_ADAPTERS];
 
 /*NVRAM nvram, *nvramp = &nvram; */
-static NVRAM i91unvram;
-static NVRAM *i91unvramp;
+static ini_NVRAM i91unvram;
+static ini_NVRAM *i91unvramp;
 
 

My advice is to keep it as a module, and then do as root "insmod /lib/module/2.2.6/scsi/initio.o".
If not, the order of the HDs will change (sda, sdb etc...) and the system may not boot at all.

Give me feedback !

Signature · 7 lines
Guillaume Laurès - student @ ESIEA (www.esiea.fr)


[[ This message was sent via the linuxppc-dev mailing list.  Replies are ]]
[[ not  forced  back  to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting.   ]]
#1 lore raw
Quoted 3 lines · On Sun, 23 May 1999 [email protected] wrote:

I can partition, format, copy/erase stuff -> no problem so far, although I'll do some deeper tests (any advice on extensive tests, benchmarking etc ?)

10 large copy/erase/repeats at a time for an hour or so, then force an fsck?

Quoted 4 lines

My advice is to keep it as a module, and then do as root "insmod /lib/module/2.2.6/scsi/initio.o".
If not, the order of the HDs will change (sda, sdb etc...) and the system may not boot at all

That's just due to the search order. For some odd reason, we go by what's attached to what (inito before, mesh, before nc53c94(?)). But if the driver becomes useable and stable, just change your /etc/fstab to reflect the new order. :)

---
Tom Rini (TR1265)
http://gate.crashing.org/~trini/

[[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]