Skip to contentSkip to conversation

how to remove PV from a VG?

linux-lvm Heinz Mauelshagen 3 participants 3 messages Oct 20, 1999

lore
Share & tools
lore
#0 lore raw
Quoted 13 lines
Quoted 9 lines · Heinz Mauelshagen
Quoted 3 lines

Hey folks,

Hi Freddy.

Quoted 2 lines

the subject says it (almost) all, I need to remove three PVs that were added to my VG by mistake (namely /dev/sdi, /dev/sdj and /dev/sdk), I guess you see where the error is. I can access data on previous PVs (yet), but don't know how to remove PVs, there is nothing linke 'pvremove'. I can assure you there is no data (perhaps except signature) on those disks.

Quoted 7 lines
Quoted 5 lines

vgreduce YourVG /dev/sd[i-k]

- or, if the 3 partitions hold the only empty PVs of YourVG -

vgreduce -a YourVG

yes, helped quite enough, just the /dev/sd[ghi] devices are still in list of valid PVs and when I run pvscan my partitions get destroyed (I suppose because of rewriting LVM marker to the device). How do I really, physically remove the devices from the PV list?

Set the partition type identifier to something different than 0xfe.

regards,
Heinz

--

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Systemmanagement CS-TS T-Nova
Entwicklungszentrum Darmstadt
Heinz Mauelshagen Otto-Roehm-Strasse 71c
Senior Systems Engineer Postfach 10 05 41

                                                 64205 Darmstadt
[email protected]                      Germany
                                                 +49 6151 886-425
                                                          FAX-386

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

#1 lore raw
Quoted 2 lines
Quoted 1 line

How do I really, physically remove the devices from the PV list?

Set the partition type identifier to something different than 0xfe.

What if the disks were to not have a `partition type', e.g. /dev/sdb or /dev/md33 ?

#2 lore raw
Quoted 5 lines · Piete Brooks
Quoted 2 lines
Quoted 1 line

How do I really, physically remove the devices from the PV list?

Set the partition type identifier to something different than 0xfe.

What if the disks were to not have a `partition type', e.g. /dev/sdb or /dev/md33 ?

dd if=/dev/zero of=/dev/sdb count=8 bs=1024 does the trick

thanks to all who responded (and subsequently helped).

regards,

Signature · 6 lines
                                             freddy

----==-- _                      Adrien "freddy" Farkas
---==---(_)__  __ ____  __       [email protected]
--==---/ / _ \/ // /\ \/ /  We all know Linux is great... It
-=====/_/_//_/\___/ /_/\_\  does infinite loops in 5 seconds