Add support for AD4113
Subsystems (3)
v2 cover Add support for AD4113
This patch series adds support for the AD4113 ADC within the existing AD7173 driver.
The AD4113 is a low power, low noise, 16-bit, Σ-Δ analog-to-digital converter (ADC) that integrates an analog front end (AFE) for four fully differential or eight single-ended inputs.
The part is not released yet and the documentation is not public. Register map is identical to AD4114 besides the lower width data register and the GPIO register.
Particularities of this model:
- 16 bit data register
- no temperature sensor
- no current inputs
- input buffers
- internal reference
- external reference REF-/REF+
- no second external reference REF2-/REF2+
- no AVDD2 supply
- 2 GPIO pins with config bits starting at a higher position in register
- 8 VINx inputs with voltage divider
- 16 channel registers and 8 setup registers
---
Changes in v2:
- correctly set realbits and storagebits to 16 in iio_chan_spec
- describe bindings restrictions in commit message due to lack of sufficient diff context
- describe model differences better in cover letter
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Dumitru Ceclan (2):
dt-bindings: adc: ad7173: add support for ad4113
iio: adc: ad7173: add support for ad4113
.../devicetree/bindings/iio/adc/adi,ad7173.yaml | 3 ++ drivers/iio/adc/ad7173.c | 36 +++++++++++++++++++++- 2 files changed, 38 insertions(+), 1 deletion(-)
---
base-commit: 1c61e13d7dc9003662bd7fd6064dfea67e64b014
change-id: 20240725-ad4113-baa63ff99245
Best regards,
Signature · 1 line
Dumitru Ceclan <[email protected]>
PATCH v2 1/2 dt-bindings: adc: ad7173: add support for ad4113
This commit adds bindings support for AD4113.
The AD4113 is a low power, low noise, 16-bit, Σ-Δ analog-to-digital converter (ADC) that integrates an analog front end (AFE) for four fully differential or eight single-ended inputs.
Added ad4113 to the compatible list and the "avdd2-supply: false" restriction.
--- Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml | 3 +++ 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml +3 -0
@@ -28,6 +28,7 @@ description: | Datasheets for supported chips: https://www.analog.com/media/en/technical-documentation/data-sheets/AD4111.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/AD4112.pdf + <AD4113: not released yet> https://www.analog.com/media/en/technical-documentation/data-sheets/AD4114.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/AD4115.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/AD4116.pdf
@@ -44,6 +45,7 @@ properties: enum: - adi,ad4111 - adi,ad4112 + - adi,ad4113 - adi,ad4114 - adi,ad4115 - adi,ad4116
@@ -331,6 +333,7 @@ allOf: enum: - adi,ad4111 - adi,ad4112 + - adi,ad4113 - adi,ad4114 - adi,ad4115 - adi,ad4116
Signature · 1 line
2.43.0
Re: [PATCH v2 1/2] dt-bindings: adc: ad7173: add support for ad4113
Quoted 21 lines · On Fri, Aug 09, 2024 at 01:33:24PM +0300, Dumitru Ceclan via B4 Relay wrote:
From: Dumitru Ceclan <[email protected]>
This commit adds bindings support for AD4113.
The AD4113 is a low power, low noise, 16-bit, Σ-Δ analog-to-digital converter (ADC) that integrates an analog front end (AFE) for four fully differential or eight single-ended inputs.
Added ad4113 to the compatible list and the "avdd2-supply: false" restriction.
Signed-off-by Dumitru Ceclan <[email protected]>--- Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml | 3 +++ 1 file changed, 3 insertions(+)Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml +0
-0
Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml description: | · line 31
Quoted 4 lines
Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml +1
-0@@ -28,6 +28,7 @@ description: | Datasheets for supported chips: https://www.analog.com/media/en/technical-documentation/data-sheets/AD4111.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/AD4112.pdf + <AD4113: not released yet>
Am I meant to ack it with this placeholder? When will the document be released?
Quoted 24 lines
Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml +2
-0https://www.analog.com/media/en/technical-documentation/data-sheets/AD4114.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/AD4115.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/AD4116.pdf@@ -44,6 +45,7 @@ properties: enum: - adi,ad4111 - adi,ad4112 + - adi,ad4113 - adi,ad4114 - adi,ad4115 - adi,ad4116@@ -331,6 +333,7 @@ allOf: enum: - adi,ad4111 - adi,ad4112 + - adi,ad4113 - adi,ad4114 - adi,ad4115 - adi,ad4116Signature · 2 lines
-- 2.43.0
Re: [PATCH v2 1/2] dt-bindings: adc: ad7173: add support for ad4113
Quoted 29 lines · Conor Dooley
Quoted 21 lines · On Fri, Aug 09, 2024 at 01:33:24PM +0300, Dumitru Ceclan via B4 Relay wrote:
From: Dumitru Ceclan <[email protected]>
This commit adds bindings support for AD4113.
The AD4113 is a low power, low noise, 16-bit, Σ-Δ analog-to-digital converter (ADC) that integrates an analog front end (AFE) for four fully differential or eight single-ended inputs.
Added ad4113 to the compatible list and the "avdd2-supply: false" restriction.
Signed-off-by Dumitru Ceclan <[email protected]>--- Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml | 3 +++ 1 file changed, 3 insertions(+)Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml +0
-0Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml description: | · line 31
Quoted 4 lines
Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml +1
-0@@ -28,6 +28,7 @@ description: | Datasheets for supported chips: https://www.analog.com/media/en/technical-documentation/data-sheets/AD4111.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/AD4112.pdf + <AD4113: not released yet>Am I meant to ack it with this placeholder? When will the document be released?
Quoted 2 lines
Acked-by Conor Dooley <[email protected]>
Not really sure tbh, up to you. The document will be released in the upcoming months.
If it's considered best to wait until the docs are public and send another version with the correct link.
If not, and maintainers consider that these changes can be accepted even without viewing the datasheet, I'll send a patch when it goes public.
Quoted 24 lines
Quoted 24 lines
Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml +2
-0https://www.analog.com/media/en/technical-documentation/data-sheets/AD4114.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/AD4115.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/AD4116.pdf@@ -44,6 +45,7 @@ properties: enum: - adi,ad4111 - adi,ad4112 + - adi,ad4113 - adi,ad4114 - adi,ad4115 - adi,ad4116@@ -331,6 +333,7 @@ allOf: enum: - adi,ad4111 - adi,ad4112 + - adi,ad4113 - adi,ad4114 - adi,ad4115 - adi,ad4116Signature · 2 lines
-- 2.43.0
Re: [PATCH v2 1/2] dt-bindings: adc: ad7173: add support for ad4113
Quoted 32 lines · Dumitru
Quoted 29 lines · Conor Dooley
Quoted 21 lines · On Fri, Aug 09, 2024 at 01:33:24PM +0300, Dumitru Ceclan via B4 Relay wrote:
From: Dumitru Ceclan <[email protected]>
This commit adds bindings support for AD4113.
The AD4113 is a low power, low noise, 16-bit, Σ-Δ analog-to-digital converter (ADC) that integrates an analog front end (AFE) for four fully differential or eight single-ended inputs.
Added ad4113 to the compatible list and the "avdd2-supply: false" restriction.
Signed-off-by Dumitru Ceclan <[email protected]>--- Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml | 3 +++ 1 file changed, 3 insertions(+)Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml +0
-0Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml description: | · line 31
Quoted 4 lines
Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml +1
-0@@ -28,6 +28,7 @@ description: | Datasheets for supported chips: https://www.analog.com/media/en/technical-documentation/data-sheets/AD4111.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/AD4112.pdf + <AD4113: not released yet>Am I meant to ack it with this placeholder? When will the document be released?
Quoted 2 lines
Acked-by Conor Dooley <[email protected]>
Quoted 6 lines
Not really sure tbh, up to you. The document will be released in the upcoming months.
If it's considered best to wait until the docs are public and send another version with the correct link.
If not, and maintainers consider that these changes can be accepted even without viewing the datasheet, I'll send a patch when it goes public.
I don't really care, it's just to Jonathan I think. I'm happy enough with you adding it when it is released.
Jonathan Cameron
maintainerRe: [PATCH v2 1/2] dt-bindings: adc: ad7173: add support for ad4113
Quoted 35 lines · On Fri, 9 Aug 2024 16:09:07 +0100 Conor Dooley <[email protected]> wrote:
Quoted 34 lines · Dumitru
Quoted 29 lines · Conor Dooley
Quoted 21 lines · On Fri, Aug 09, 2024 at 01:33:24PM +0300, Dumitru Ceclan via B4 Relay wrote:
From: Dumitru Ceclan <[email protected]>
This commit adds bindings support for AD4113.
The AD4113 is a low power, low noise, 16-bit, Σ-Δ analog-to-digital converter (ADC) that integrates an analog front end (AFE) for four fully differential or eight single-ended inputs.
Added ad4113 to the compatible list and the "avdd2-supply: false" restriction.
Signed-off-by Dumitru Ceclan <[email protected]>--- Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml | 3 +++ 1 file changed, 3 insertions(+)Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml +0
-0Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml description: | · line 31
Quoted 4 lines
Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml +1
-0@@ -28,6 +28,7 @@ description: | Datasheets for supported chips: https://www.analog.com/media/en/technical-documentation/data-sheets/AD4111.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/AD4112.pdf + <AD4113: not released yet>Am I meant to ack it with this placeholder? When will the document be released?
Quoted 2 lines
Acked-by Conor Dooley <[email protected]>Not really sure tbh, up to you. The document will be released in the upcoming months.
Quoted 7 lines
Quoted 4 lines
If it's considered best to wait until the docs are public and send another version with the correct link.
If not, and maintainers consider that these changes can be accepted even without viewing the datasheet, I'll send a patch when it goes public.I don't really care, it's just to Jonathan I think. I'm happy enough with you adding it when it is released.
Given some companies never release public docs (mine for example rarely does) there is no requirement for datasheets. So this is fine, particularly if you come back with a link when it is available.
Thanks,
Jonathan
PATCH v2 2/2 iio: adc: ad7173: add support for ad4113
In reply to Dumitru CeclanThis commit adds support for the AD4113 ADC.
The AD4113 is a low power, low noise, 16-bit, Σ-Δ analog-to-digital converter (ADC) that integrates an analog front end (AFE) for four fully differential or eight single-ended inputs.
--- drivers/iio/adc/ad7173.c | 36 +++++++++++++++++++++++++++++++++++- 1 file changed, 35 insertions(+), 1 deletion(-)
drivers/iio/adc/ad7173.c +35 -1
@@ -3,7 +3,7 @@* AD717x and AD411x family SPI ADC driver * * Supported devices: -* AD4111/AD4112/AD4114/AD4115/AD4116 +* AD4111/AD4112/AD4113/AD4114/AD4115/AD4116 * AD7172-2/AD7172-4/AD7173-8/AD7175-2 * AD7175-8/AD7176-2/AD7177-2 *
@@ -84,6 +84,7 @@#define AD4111_ID AD7173_ID#define AD4112_ID AD7173_ID#define AD4114_ID AD7173_ID +#define AD4113_ID 0x31D0#define AD4116_ID 0x34d0#define AD4115_ID 0x38d0#define AD7175_8_ID 0x3cd0
@@ -170,6 +171,7 @@ struct ad7173_device_info {bool has_temp;/* ((AVDD1 − AVSS)/5) */ bool has_pow_supply_monitoring; +bool data_reg_only_16bit;bool has_input_buf;bool has_int_ref;bool has_ref2;
@@ -294,6 +296,24 @@ static const struct ad7173_device_info ad4112_device_info = { .num_sinc5_data_rates = ARRAY_SIZE(ad7173_sinc5_data_rates), }; +static const struct ad7173_device_info ad4113_device_info = { + .name ="ad4113" , + .id =AD4113_ID , + .num_voltage_in_div =8 , + .num_channels =16 , + .num_configs =8 , + .num_voltage_in =8 , + .num_gpios =2 , + .data_reg_only_16bit = true, + .higher_gpio_bits = true, + .has_vincom_input = true, + .has_input_buf = true, + .has_int_ref = true, + .clock =2 *HZ_PER_MHZ , + .sinc5_data_rates = ad7173_sinc5_data_rates, + .num_sinc5_data_rates =ARRAY_SIZE (ad7173_sinc5_data_rates), +}; +static const struct ad7173_device_info ad4114_device_info = { .name ="ad4114" , .id =AD4114_ID ,
@@ -988,6 +1008,13 @@ static const struct iio_info ad7173_info = { .update_scan_mode = ad7173_update_scan_mode, }; +static const struct iio_scan_type ad4113_scan_type = { + .sign ='u' , + .realbits =16 , + .storagebits =16 , + .endianness =IIO_BE , +}; +static const struct iio_chan_spec ad7173_channel_template = { .type =IIO_VOLTAGE , .indexed =1 ,
@@ -1229,6 +1256,8 @@ static int ad7173_fw_parse_channel_config(struct iio_dev *indio_dev) chan_st_priv->cfg.input_buf = st->info->has_input_buf; chan_st_priv->cfg.ref_sel =AD7173_SETUP_REF_SEL_INT_REF ; st->adc_mode |=AD7173_ADC_MODE_REF_EN ; +if (st->info->data_reg_only_16bit) + chan_arr[chan_index].scan_type = ad4113_scan_type; chan_index++; }
@@ -1309,6 +1338,9 @@ static int ad7173_fw_parse_channel_config(struct iio_dev *indio_dev) chan_st_priv->ain =AD7173_CH_ADDRESS (ain[0 ], ain[1 ]); } +if (st->info->data_reg_only_16bit) + chan_arr[chan_index].scan_type = ad4113_scan_type; + chan_index++; }return 0 ;
@@ -1437,6 +1469,7 @@ static int ad7173_probe(struct spi_device *spi)static const struct of_device_id ad7173_of_match[] = { { .compatible ="adi,ad4111" , .data = &ad4111_device_info }, { .compatible ="adi,ad4112" , .data = &ad4112_device_info }, + { .compatible ="adi,ad4113" , .data = &ad4113_device_info }, { .compatible ="adi,ad4114" , .data = &ad4114_device_info }, { .compatible ="adi,ad4115" , .data = &ad4115_device_info }, { .compatible ="adi,ad4116" , .data = &ad4116_device_info },
@@ -1454,6 +1487,7 @@ MODULE_DEVICE_TABLE(of, ad7173_of_match);static const struct spi_device_id ad7173_id_table[] = { {"ad4111" , (kernel_ulong_t)&ad4111_device_info }, {"ad4112" , (kernel_ulong_t)&ad4112_device_info }, + {"ad4113" , (kernel_ulong_t)&ad4113_device_info }, {"ad4114" , (kernel_ulong_t)&ad4114_device_info }, {"ad4115" , (kernel_ulong_t)&ad4115_device_info }, {"ad4116" , (kernel_ulong_t)&ad4116_device_info },
Signature · 1 line
2.43.0
Re: [PATCH v2 2/2] iio: adc: ad7173: add support for ad4113
Quoted 9 lines · On Fri, 2024-08-09 at 13:33 +0300, Dumitru Ceclan via B4 Relay wrote:
From: Dumitru Ceclan <[email protected]>
This commit adds support for the AD4113 ADC.
The AD4113 is a low power, low noise, 16-bit, Σ-Δ analog-to-digital converter (ADC) that integrates an analog front end (AFE) for four fully differential or eight single-ended inputs.Signed-off-by Dumitru Ceclan <[email protected]>---
Any reason to drop my tag :)? There a b4 command that can help you with it.
- Nuno Sá
Re: [PATCH v2 2/2] iio: adc: ad7173: add support for ad4113
Quoted 8 lines · Nuno Sá
Quoted 7 lines · On Fri, 2024-08-09 at 13:33 +0300, Dumitru Ceclan via B4 Relay wrote:
From: Dumitru Ceclan <[email protected]>
This commit adds support for the AD4113 ADC.
The AD4113 is a low power, low noise, 16-bit, Σ-Δ analog-to-digital converter (ADC) that integrates an analog front end (AFE) for four fully differential or eight single-ended inputs.
Quoted 8 lines
Quoted 2 lines
Signed-off-by Dumitru Ceclan <[email protected]>---
Any reason to drop my tag :)? There a b4 command that can help you with it.
- Nuno Sá
Yes, I added a new field to the device info struct and changed dt parsing because I missed in V1 that this model actually has a 16 bit data register. I considered that the rb would not apply anymore and it would need a re-review.
Thanks for the b4 suggestion but this was intentional :))
Nuno Sá
Reviewed-by Nuno SaRe: [PATCH v2 2/2] iio: adc: ad7173: add support for ad4113
Quoted 18 lines · Dumitru
Quoted 8 lines · Nuno Sá
Quoted 7 lines · On Fri, 2024-08-09 at 13:33 +0300, Dumitru Ceclan via B4 Relay wrote:
From: Dumitru Ceclan <[email protected]>
This commit adds support for the AD4113 ADC.
The AD4113 is a low power, low noise, 16-bit, Σ-Δ analog-to-digital converter (ADC) that integrates an analog front end (AFE) for four fully differential or eight single-ended inputs.Quoted 8 lines
Quoted 2 lines
Signed-off-by Dumitru Ceclan <[email protected]>---
Any reason to drop my tag :)? There a b4 command that can help you with it.
- Nuno Sá
Quoted 5 lines
Yes, I added a new field to the device info struct and changed dt parsing because I missed in V1 that this model actually has a 16 bit data register. I considered that the rb would not apply anymore and it would need a re-review.
Thanks for the b4 suggestion but this was intentional :))
Got it. Next time mention that in the cover...
Re: [PATCH v2 2/2] iio: adc: ad7173: add support for ad4113
In reply to Dumitru CeclanLe 09/08/2024 à 12:33, Dumitru Ceclan via B4 Relay a écrit :
Quoted 26 lines
From: Dumitru Ceclan <[email protected]>
This commit adds support for the AD4113 ADC.
The AD4113 is a low power, low noise, 16-bit, Σ-Δ analog-to-digital converter (ADC) that integrates an analog front end (AFE) for four fully differential or eight single-ended inputs.Signed-off-by Dumitru Ceclan <[email protected]>--- drivers/iio/adc/ad7173.c | 36 +++++++++++++++++++++++++++++++++++- 1 file changed, 35 insertions(+), 1 deletion(-)drivers/iio/adc/ad7173.c +1
-1@@ -3,7 +3,7 @@* AD717x and AD411x family SPI ADC driver * * Supported devices: -* AD4111/AD4112/AD4114/AD4115/AD4116 +* AD4111/AD4112/AD4113/AD4114/AD4115/AD4116 * AD7172-2/AD7172-4/AD7173-8/AD7175-2 * AD7175-8/AD7176-2/AD7177-2 *
drivers/iio/adc/ad7173.c line 87
Quoted 4 lines
drivers/iio/adc/ad7173.c +1
-0@@ -84,6 +84,7 @@#define AD4111_ID AD7173_ID#define AD4112_ID AD7173_ID#define AD4114_ID AD7173_ID +#define AD4113_ID 0x31D0
Nitpick: others are in lowercase --> 0x31d0
drivers/iio/adc/ad7173.c line 90
Quoted 3 lines
drivers/iio/adc/ad7173.c +0
-0#define AD4116_ID 0x34d0#define AD4115_ID 0x38d0#define AD7175_8_ID 0x3cd0
Other than that, is there any reason to have this "random" order for these defines?
CJ
Re: [PATCH v2 2/2] iio: adc: ad7173: add support for ad4113
Quoted 34 lines · Christophe JAILLET
Le 09/08/2024 à 12:33, Dumitru Ceclan via B4 Relay a écrit :
Quoted 26 lines
From: Dumitru Ceclan <[email protected]>
This commit adds support for the AD4113 ADC.
The AD4113 is a low power, low noise, 16-bit, Σ-Δ analog-to-digital converter (ADC) that integrates an analog front end (AFE) for four fully differential or eight single-ended inputs.Signed-off-by Dumitru Ceclan <[email protected]>---
drivers/iio/adc/ad7173.c| 36 +++++++++++++++++++++++++++++++++++-1 file changed, 35 insertions(+), 1 deletion(-)drivers/iio/adc/ad7173.c +1
-1@@ -3,7 +3,7 @@ * AD717x and AD411x family SPI ADC driver * * Supported devices: - * AD4111/AD4112/AD4114/AD4115/AD4116 + * AD4111/AD4112/AD4113/AD4114/AD4115/AD4116 * AD7172-2/AD7172-4/AD7173-8/AD7175-2 * AD7175-8/AD7176-2/AD7177-2 *drivers/iio/adc/ad7173.c line 87
Quoted 4 lines
drivers/iio/adc/ad7173.c +1
-0@@ -84,6 +84,7 @@ #define AD4111_ID AD7173_ID #define AD4112_ID AD7173_ID #define AD4114_ID AD7173_ID +#define AD4113_ID 0x31D0Nitpick: others are in lowercase -->
0x31d0
Quoted 8 lines
drivers/iio/adc/ad7173.c line 90
Quoted 3 lines
drivers/iio/adc/ad7173.c +0
-0#define AD4116_ID 0x34d0 #define AD4115_ID 0x38d0 #define AD7175_8_ID 0x3cd0Other than that, is there any reason to have this "random" order for these defines?
CJ
It's not random, it was requested to order these defines by the ID value:
https://lore.kernel.org/all/CAHp75VcjcgnLkQWim1AVnyeRGFwwKpaWSCvrmqdv41Lx87hMKw@mail.gmail.com/
Re: [PATCH v2 2/2] iio: adc: ad7173: add support for ad4113
Le 09/08/2024 à 16:40, Ceclan, Dumitru a écrit :
Quoted 39 lines · Christophe JAILLET
Quoted 38 lines
Le 09/08/2024 à 12:33, Dumitru Ceclan via B4 Relay a écrit :
Quoted 26 lines
From: Dumitru Ceclan <dumitru.ceclan-OyLXuOCK7orQT0dZR+AlfA-XMD5yJDbdMReXY1tMh2IBg@public.gmane.org>
This commit adds support for the AD4113 ADC.
The AD4113 is a low power, low noise, 16-bit, Σ-Δ analog-to-digital converter (ADC) that integrates an analog front end (AFE) for four fully differential or eight single-ended inputs.--- drivers/iio/adc/ad7173.c | 36 +++++++++++++++++++++++++++++++++++- 1 file changed, 35 insertions(+), 1 deletion(-)drivers/iio/adc/ad7173.c +1
-1@@ -3,7 +3,7 @@ * AD717x and AD411x family SPI ADC driver * * Supported devices: - * AD4111/AD4112/AD4114/AD4115/AD4116 + * AD4111/AD4112/AD4113/AD4114/AD4115/AD4116 * AD7172-2/AD7172-4/AD7173-8/AD7175-2 * AD7175-8/AD7176-2/AD7177-2 *drivers/iio/adc/ad7173.c line 87
Quoted 4 lines
drivers/iio/adc/ad7173.c +1
-0@@ -84,6 +84,7 @@ #define AD4111_ID AD7173_ID #define AD4112_ID AD7173_ID #define AD4114_ID AD7173_ID +#define AD4113_ID 0x31D0Nitpick: others are in lowercase -->
0x31d0Quoted 3 lines
drivers/iio/adc/ad7173.c +0
-0#define AD4116_ID 0x34d0 #define AD4115_ID 0x38d0 #define AD7175_8_ID 0x3cd0
Quoted 8 lines
Quoted 4 lines
Other than that, is there any reason to have this "random" order for these defines?
CJ
It's not random, it was requested to order these defines by the ID value:
https://lore.kernel.org/all/CAHp75VcjcgnLkQWim1AVnyeRGFwwKpaWSCvrmqdv41Lx87hMKw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org/
Ok,
I thought about it, but it is not sorted either. (a few lines above the place you added the new #define):
#define AD7175_ID 0x0cd0
#define AD7176_ID 0x0c90
Maybe, it should be part of another patch to keep the logic by ID value?
CJ