Unable to use IPMI command "set lan access"
Hi Richard,
The ipmi command "set lan access" does not work because there is no specify object path in xyz.openbmc_project.Network.
https://github.com/openbmc/phosphor-host-ipmid/blob/master/user_channel/channel_mgmt.cpp#L610
Refer to
https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-networkd/+/13114/
It seems this patch resolves this issue. Will the patch be updated in the future or is there another solution to this problem?
Thanks
Best Regards,
Tony
Hi Tony,
Will start addressing the comments / respond to the comments and rebase the patch. Basically one of the discussion we had was whether it is required globally or to limit it to IPMI. I want to check with DMTF related to their strategy on channel based restriction ? will post a question and accordingly update the patch.
Regards,
Richard
Quoted 2 lines · Tony Lee (李文富)
h resolves this issue. Will the patch be updated in the future or is there another solution to this problem?
I see, thank you for your reply and explanation
Best Regards,
Tony
Quoted 22 lines
-----Original Message-----
From: Thomaiyar, Richard Marian <[email protected]>
Sent: Wednesday, January 15, 2020 12:09 AM
To: Tony Lee (李文富) <[email protected]>
Cc: [email protected]
Subject: Re: Unable to use IPMI command "set lan access"Hi Tony,
Will start addressing the comments / respond to the comments and rebase the patch. Basically one of the discussion we had was whether it is required globally or to limit it to IPMI. I want to check with DMTF related to their strategy on channel based restriction ? will post a question and accordingly update the patch.
Regards,
Richard
Quoted 2 lines · Tony Lee (李文富)
h resolves this issue. Will the patch be updated in the future or is there another solution to this problem?