Skip to contentSkip to conversation

Unable to use IPMI command "set lan access"

DISCUSSION Tony Lee (李文富) 2 participants 3 messages Dec 30, 2019 – Jan 15, 2020

lore
Share & tools
lore
#0 lore raw

Hi Richard,

The ipmi command "set lan access" does not work because there is no specify object path in xyz.openbmc_project.Network.
https://github.com/openbmc/phosphor-host-ipmid/blob/master/user_channel/channel_mgmt.cpp#L610

Refer to
https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-networkd/+/13114/
It seems this patch resolves this issue. Will the patch be updated in the future or is there another solution to this problem?

Thanks
Best Regards,
Tony

#1 lore raw

Hi Tony,

Will start addressing the comments / respond to the comments and rebase the patch. Basically one of the discussion we had was whether it is required globally or to limit it to IPMI. I want to check with DMTF related to their strategy on channel based restriction ? will post a question and accordingly update the patch.

Regards,

Richard

Quoted 2 lines · Tony Lee (李文富)

h resolves this issue. Will the patch be updated in the future or is there another solution to this problem?

#2 lore raw

I see, thank you for your reply and explanation

Best Regards,
Tony

Quoted 22 lines

-----Original Message-----
From: Thomaiyar, Richard Marian <[email protected]>
Sent: Wednesday, January 15, 2020 12:09 AM
To: Tony Lee (李文富) <[email protected]>
Cc: [email protected]
Subject: Re: Unable to use IPMI command "set lan access"

Hi Tony,

Will start addressing the comments / respond to the comments and rebase the patch. Basically one of the discussion we had was whether it is required globally or to limit it to IPMI. I want to check with DMTF related to their strategy on channel based restriction ? will post a question and accordingly update the patch.

Regards,

Richard

Quoted 2 lines · Tony Lee (李文富)

h resolves this issue. Will the patch be updated in the future or is there another solution to this problem?