Skip to contentSkip to conversation

OT: mount/umount doesn't track used resources correctly?

DISCUSSION Peter Samuelson 2 participants 2 messages Jan 31, 2001 – Feb 1, 2001 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

[Miles Lane]

Quoted 3 lines

I think the problem may be due to usermode tools not handling the new "mount multiple devices to a single mount point" feature, but I'm not sure.

Yes, quite possibly. Rumor has it that util-linux has recently acquired some wisdom in this area. (I can't confirm or deny.) Try upgrading, or just trust /proc/mounts for the real story..

Peter
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw
In reply to a message not in the archive

Woohoo! Thanks Peter.

You are correct. I just built and installed util-linux-2.10s from source. I ran through the cross-mounting scenario and was able to unmount all the partitions on the USB external drive and then unload all the USB drivers.

Perhaps util-linux-2.10s should be made the new default listed in Documentation/Changes?

Cheers,
Miles

Quoted 9 lines · Peter Samuelson

[Miles Lane]

Quoted 3 lines

I think the problem may be due to usermode tools not handling the new "mount multiple devices to a single mount point" feature, but I'm not sure.

Yes, quite possibly. Rumor has it that util-linux has recently acquired some wisdom in this area. (I can't confirm or deny.) Try upgrading, or just trust /proc/mounts for the real story..

[...]

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/