OT: mount/umount doesn't track used resources correctly?
A message that is not in the archive (sent off-list or not yet received): [email protected]
[Miles Lane]
Quoted 3 lines
I think the problem may be due to usermode tools not handling the new "mount multiple devices to a single mount point" feature, but I'm not sure.
Yes, quite possibly. Rumor has it that util-linux has recently acquired some wisdom in this area. (I can't confirm or deny.) Try upgrading, or just trust /proc/mounts for the real story..
Peter
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Woohoo! Thanks Peter.
You are correct. I just built and installed util-linux-2.10s from source. I ran through the cross-mounting scenario and was able to unmount all the partitions on the USB external drive and then unload all the USB drivers.
Perhaps util-linux-2.10s should be made the new default listed in Documentation/Changes?
Cheers,
Miles
Quoted 9 lines · Peter Samuelson
[Miles Lane]
Quoted 3 lines
I think the problem may be due to usermode tools not handling the new "mount multiple devices to a single mount point" feature, but I'm not sure.
Yes, quite possibly. Rumor has it that util-linux has recently acquired some wisdom in this area. (I can't confirm or deny.) Try upgrading, or just trust
/proc/mountsfor the real story..
[...]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/