EEpro100 bug in 2.2.18
Hello all,
My setup is Intel 440GX MB with intergrated EEPro100. When using Linux 2.2.18 the following happen: after reboot, I got:
eepro100: cmd_wait for (0xffffff90) timedout with (0xffffff90)!
and NIC is dead.
After power cycle, first boot works fine and all following boots (without power off) - see above. Very seldom (I've noticed this 2 times during 2 monthes) this happen during normal operation.
2.2.12 and 2.4.x runs without problem (but have other problems which it unusable for me).
Signature · 2 lines
Best regards, Andriy mailto:[email protected]
Quoted 4 lines · Andriy Korud
Hello all,
My setup is Intel 440GX MB with intergrated EEPro100. When using Linux 2.2.18 the following happen: after reboot, I got:eepro100: cmd_wait for (0xffffff90) timedout with (0xffffff90)!
I reported the same hassle a while back. A patch was suggested and am using it now. It's in the thread titled 'eepro100 + 2.2.18 + laptop problems'.
Quoted 3 lines
After power cycle, first boot works fine and all following boots (without power off) - see above. Very seldom (I've noticed this 2 times during 2 monthes) this happen during normal operation.
I jsut take the interface down and up and eventually it goes ok. It doesn't happen all the time either.
Signature · 5 lines
CaT ([email protected]) *** Jenna has joined the channel. <cat> speaking of mental giants.. <Jenna> me, a giant, bullshit <Jenna> And i'm not mental - An IRC session, 20/12/2000