ide / usb problem
jerry ([email protected])> I also am using the cable supplied with the mobo (Abit kt7) so I
do not
Quoted 7 lines
think it is ASUS specific. More likey it is releated to the VIA chipset and/or driver.
If I compile kernel with "Generic PCI bus-master DMA support" and run "hdparm -d1
/dev/hda" I get 700% performance increase on hdparm -t benchmark and I do not get any dma BadCRC errors.
Quoted 7 lines
It is only when I also compile in the VIA82CXXX option that I get the
"hda: dma_intr:status=0x51 { DriveReady SeekComplete Error }" "hda: dma_intr:error=0x84 { DriveStatusError BadCRC }"mesages (1000's of them).
Whether I get the messages or not, if I have dma enabled with 2.4.2 my usb mouse stops working .
If you use the VIA IDE driver, then you _must_ turn on the "Automatically enable DMA for PCI-IDE" kernel configuration option. It is said in the help text for the VIA-IDE option.
Signature · 4 lines
David Balazic -------------- "Be excellent to each other." - Bill & Ted - - - - - - - - - - - - - - - - - - - - - -
I did use that option. The system works but it generates a large number of the BadCRC messages when I do heavy io. Using then generic dma bus master support gives me fast io without the messages.
jpd
Quoted 4 lines
If you use the VIA IDE driver, then you _must_ turn on the "Automatically enable DMA for PCI-IDE" kernel configuration option. It is said in the help text for the VIA-IDE option.