Skip to contentSkip to conversation

ide / usb problem

DISCUSSION David Balazic 2 participants 2 messages Feb 26, 2001

lore
Share & tools
lore
#0 lore raw

jerry ([email protected])> I also am using the cable supplied with the mobo (Abit kt7) so I
do not

Quoted 7 lines

think it is ASUS specific. More likey it is releated to the VIA chipset and/or driver.

If I compile kernel with "Generic PCI bus-master DMA support" and run "hdparm -d1 /dev/hda" I get 700% performance increase on hdparm -t benchmark and I do not get any dma BadCRC errors.

Quoted 7 lines

It is only when I also compile in the VIA82CXXX option that I get the

    "hda: dma_intr:status=0x51 { DriveReady SeekComplete Error }"
    "hda: dma_intr:error=0x84 { DriveStatusError BadCRC }"

mesages (1000's of them).

Whether I get the messages or not, if I have dma enabled with 2.4.2 my usb mouse stops working .

If you use the VIA IDE driver, then you _must_ turn on the "Automatically enable DMA for PCI-IDE" kernel configuration option. It is said in the help text for the VIA-IDE option.

Signature · 4 lines
David Balazic
--------------
"Be excellent to each other." - Bill & Ted
- - - - - - - - - - - - - - - - - - - - - -
#1 lore raw

I did use that option. The system works but it generates a large number of the BadCRC messages when I do heavy io. Using then generic dma bus master support gives me fast io without the messages.

jpd

Quoted 4 lines

If you use the VIA IDE driver, then you _must_ turn on the "Automatically enable DMA for PCI-IDE" kernel configuration option. It is said in the help text for the VIA-IDE option.