Skip to contentSkip to conversation

v2410p8 and v2410p9 are no go

DISCUSSION Mario Mikocevic 4 participants 5 messages Sep 14, 2001

lore
Share & tools
lore
#0 lore raw

Hi,

kernels 2.4.10-pre8 and 2.4.10-pre9 are NoGo for me, last kernel I tried and it still runs succesfully is 2.4.10-pre4.

dmesg difference is ->

- hda: [PTBL] [5171/240/63] hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
- hdd: [PTBL] [787/128/63] hdd1
+ hda: no partitions found
+ hdd: no partitions found

it's [email protected] w/ 256MiB RAM (HP Vectra).

Any further required info is available on requests.

Signature · 3 lines
Mario Mikočević (Mozgy)
mozgy at hinet dot hr
My favourite FUBAR ...
#1 lore raw
Quoted 11 lines · In article <[email protected]> you wrote:

Hi,

kernels 2.4.10-pre8 and 2.4.10-pre9 are NoGo for me, last kernel I tried and it still runs succesfully is 2.4.10-pre4.

dmesg difference is ->

- hda: [PTBL] [5171/240/63] hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
- hdd: [PTBL] [787/128/63] hdd1
+ hda: no partitions found
+ hdd: no partitions found

That looks like the gendisk changes.. Anything special with that machine? (IDE driver?).

Christoph

Signature · 1 line
Of course it doesn't work. We've performed a software upgrade.
#2 lore raw
In reply to Mario Mikocevic
Quoted 10 lines

kernels 2.4.10-pre8 and 2.4.10-pre9 are NoGo for me, last kernel I tried and it still runs succesfully is 2.4.10-pre4.

dmesg difference is ->

- hda: [PTBL] [5171/240/63] hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
- hdd: [PTBL] [787/128/63] hdd1
+ hda: no partitions found
+ hdd: no partitions found

What IDE chipset are you using. Also do you have ACPI enabled and if so does it work if you dont compile that in ?

#3 lore raw
In reply to Mario Mikocevic
Quoted 7 lines · Christoph Hellwig
Quoted 4 lines · In article <[email protected]> Alan wrote:

- hda: [PTBL] [5171/240/63] hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
- hdd: [PTBL] [787/128/63] hdd1
+ hda: no partitions found
+ hdd: no partitions found

That looks like the gendisk changes..

It is.

Regards,

Signature · 3 lines
Kurt Garloff  <[email protected]>                          Eindhoven, NL
GPG key: See mail header, key servers         Linux kernel development
SuSE GmbH, Nuernberg, DE                                SCSI, Security
#4 lore raw
In reply to Mario Mikocevic

Hi,

Quoted 5 lines
Quoted 5 lines

kernels 2.4.10-pre8 and 2.4.10-pre9 are NoGo for me, last kernel I tried and it still runs succesfully is 2.4.10-pre4.

dmesg difference is ->

Quoted 8 lines
Quoted 5 lines

- hda: [PTBL] [5171/240/63] hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
- hdd: [PTBL] [787/128/63] hdd1
+ hda: no partitions found
+ hdd: no partitions found

What IDE chipset are you using. Also do you have ACPI enabled and if so does it work if you dont compile that in ?

# lspci
00:00.0 Host bridge: Intel Corporation 82850 850 (Tehama) Chipset Host Bridge (MCH) (rev 02)
00:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP Bridge (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82820 820 (Camino 2) Chipset PCI (rev 04)
00:1f.0 ISA bridge: Intel Corporation 82820 820 (Camino 2) Chipset ISA Bridge (ICH2) (rev 04)
00:1f.1 IDE interface: Intel Corporation 82820 820 (Camino 2) Chipset IDE U100 (rev 04)
00:1f.2 USB Controller: Intel Corporation 82820 820 (Camino 2) Chipset USB (Hub A) (rev 04)
00:1f.3 SMBus: Intel Corporation 82820 820 (Camino 2) Chipset SMBus (rev 04)
00:1f.5 Multimedia audio controller: Intel Corporation: Unknown device 2445 (rev 04)
01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5144
02:09.0 Multimedia audio controller: Unknown device 5046:1001 (rev 01)
02:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 6c)
# grep ACPI /usr/src/linux/.config
CONFIG_ACPI=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUSMGR=y
CONFIG_ACPI_SYS=y
CONFIG_ACPI_CPU=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_EC is not set
# CONFIG_ACPI_CMBATT is not set
# CONFIG_ACPI_THERMAL is not set

will try without ACPI ..

Signature · 3 lines
Mario Mikočević (Mozgy)
mozgy at hinet dot hr
My favourite FUBAR ...