v2410p8 and v2410p9 are no go
Hi,
kernels 2.4.10-pre8 and 2.4.10-pre9 are NoGo for me, last kernel I tried and it still runs succesfully is 2.4.10-pre4.
dmesg difference is ->
- hda: [PTBL] [5171/240/63] hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
- hdd: [PTBL] [787/128/63] hdd1
+ hda: no partitions found
+ hdd: no partitions found
it's [email protected] w/ 256MiB RAM (HP Vectra).
Any further required info is available on requests.
Signature · 3 lines
Mario Mikočević (Mozgy) mozgy at hinet dot hr My favourite FUBAR ...
Quoted 11 lines · In article <[email protected]> you wrote:
Hi,
kernels 2.4.10-pre8 and 2.4.10-pre9 are NoGo for me, last kernel I tried and it still runs succesfully is 2.4.10-pre4.
dmesg difference is ->
- hda: [PTBL] [5171/240/63] hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
- hdd: [PTBL] [787/128/63] hdd1
+ hda: no partitions found
+ hdd: no partitions found
That looks like the gendisk changes.. Anything special with that machine? (IDE driver?).
Christoph
Signature · 1 line
Of course it doesn't work. We've performed a software upgrade.
Quoted 10 lines
kernels 2.4.10-pre8 and 2.4.10-pre9 are NoGo for me, last kernel I tried and it still runs succesfully is 2.4.10-pre4.
dmesg difference is ->
- hda: [PTBL] [5171/240/63] hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
- hdd: [PTBL] [787/128/63] hdd1
+ hda: no partitions found
+ hdd: no partitions found
What IDE chipset are you using. Also do you have ACPI enabled and if so does it work if you dont compile that in ?
Quoted 7 lines · Christoph Hellwig
Quoted 4 lines · In article <[email protected]> Alan wrote:
- hda: [PTBL] [5171/240/63] hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
- hdd: [PTBL] [787/128/63] hdd1
+ hda: no partitions found
+ hdd: no partitions foundThat looks like the gendisk changes..
It is.
Regards,
Signature · 3 lines
Kurt Garloff <[email protected]> Eindhoven, NL GPG key: See mail header, key servers Linux kernel development SuSE GmbH, Nuernberg, DE SCSI, Security
Hi,
Quoted 5 lines
Quoted 5 lines
kernels 2.4.10-pre8 and 2.4.10-pre9 are NoGo for me, last kernel I tried and it still runs succesfully is 2.4.10-pre4.
dmesg difference is ->
Quoted 8 lines
Quoted 5 lines
- hda: [PTBL] [5171/240/63] hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
- hdd: [PTBL] [787/128/63] hdd1
+ hda: no partitions found
+ hdd: no partitions foundWhat IDE chipset are you using. Also do you have ACPI enabled and if so does it work if you dont compile that in ?
# lspci 00:00.0 Host bridge: Intel Corporation 82850 850 (Tehama) Chipset Host Bridge (MCH) (rev 02) 00:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP Bridge (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82820 820 (Camino 2) Chipset PCI (rev 04) 00:1f.0 ISA bridge: Intel Corporation 82820 820 (Camino 2) Chipset ISA Bridge (ICH2) (rev 04) 00:1f.1 IDE interface: Intel Corporation 82820 820 (Camino 2) Chipset IDE U100 (rev 04) 00:1f.2 USB Controller: Intel Corporation 82820 820 (Camino 2) Chipset USB (Hub A) (rev 04) 00:1f.3 SMBus: Intel Corporation 82820 820 (Camino 2) Chipset SMBus (rev 04) 00:1f.5 Multimedia audio controller: Intel Corporation: Unknown device 2445 (rev 04) 01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5144 02:09.0 Multimedia audio controller: Unknown device 5046:1001 (rev 01) 02:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 6c)
# grep ACPI /usr/src/linux/.config CONFIG_ACPI=y # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUSMGR=y CONFIG_ACPI_SYS=y CONFIG_ACPI_CPU=y CONFIG_ACPI_BUTTON=y # CONFIG_ACPI_AC is not set # CONFIG_ACPI_EC is not set # CONFIG_ACPI_CMBATT is not set # CONFIG_ACPI_THERMAL is not set
will try without ACPI ..
Signature · 3 lines
Mario Mikočević (Mozgy) mozgy at hinet dot hr My favourite FUBAR ...