2.4.10 stable tree
A message that is not in the archive (sent off-list or not yet received): [email protected]
Now I see what must have happenned. Sorry to waste the BW. I must have copied the simple direcoty from the devel tree into my stable tree and done it recursively, thus taking the bitkeeper history with it. So I could see all the changesets with revtool on simple/head.S. I just did a revtool on the full tree and compared csets with what rev tool on simple head.S showed and could not match them up. If I only had a brain.
Sorry to waste your time. Thanks Tom for the slap.
Quoted 18 lines · you
Quoted 1 line · Brian Waite
I have been working on a stable port of the MVME5100 from the devel tree.
I
Quoted 2 lines
had everything working from 2.4.9 and I got onot other projects. I just grabbed the 2.4.10 stable tree and noticed the
arch/ppc/boot/simpledirectory
Quoted 2 lines
has been removed. I was using
simple/head.Sto bring up the board. What should I be using now? Have you abandoned a simplehead.Slayout andrequire
Quoted 2 lines
all baords to have their own
head.Snow? I am just making sure I am not missing something.
Quoted 6 lines
Er.
linuxppc_2_4(the 'stable' branch) does not have the new boot stuffs yet. I will once things are done however. Since you're moving the mvme5100
stuff fromlinuxppc_2_4_develintolinuxppc_2_4(If I'm reading this right),
just move thearch/ppc/boot/simplestuff as well.
--
Thanks
Brian
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/