Skip to contentSkip to conversation

2.4.10 stable tree

DISCUSSION Brian Waite 1 participant 1 message Sep 28, 2001 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Now I see what must have happenned. Sorry to waste the BW. I must have copied the simple direcoty from the devel tree into my stable tree and done it recursively, thus taking the bitkeeper history with it. So I could see all the changesets with revtool on simple/head.S. I just did a revtool on the full tree and compared csets with what rev tool on simple head.S showed and could not match them up. If I only had a brain.
Sorry to waste your time. Thanks Tom for the slap.

Quoted 18 lines · you
Quoted 1 line · Brian Waite

I have been working on a stable port of the MVME5100 from the devel tree.

I

Quoted 2 lines

had everything working from 2.4.9 and I got onot other projects. I just grabbed the 2.4.10 stable tree and noticed the arch/ppc/boot/simple

directory

Quoted 2 lines

has been removed. I was using simple/head.S to bring up the board. What should I be using now? Have you abandoned a simple head.S layout and

require

Quoted 2 lines

all baords to have their own head.S now? I am just making sure I am not missing something.

Quoted 6 lines

Er. linuxppc_2_4 (the 'stable' branch) does not have the new boot stuffs yet. I will once things are done however. Since you're moving the mvme5100
stuff from linuxppc_2_4_devel into linuxppc_2_4 (If I'm reading this right),
just move the arch/ppc/boot/simple stuff as well.

--
Thanks
Brian

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/