Skip to contentSkip to conversation

bonding driver - linux kernel

DISCUSSION Phil Sorber 3 participants 3 messages Nov 9, 2001 – Nov 10, 2001

lore
Share & tools
lore
#0 lore raw

hello,

i have an HP Procurve 4000M and a linux box with an Intel Pro/100 Dual Port Server Adapter (eepro.c). we have the switch set to do cicso etherchannel, which the procurve supports. but it seems not to work in this mode. we have to back down to trunking mode, giving us 200Mbit upstream, but only 100Mbit down stream.

I was curious if it had been tested with any HP switches, or any non cisco switches for that matter that support cisco etherchannel. i was also wondering if this is not the case if anyone has written a patch, or is planning to write one to correct this.

if not, me and my colleague and i are willing to take a crack at it. however we have limited experience at something like this, but are eager to get into it.

any help or direction is apreciated. thanx.

Signature · 4 lines
Phil Sorber
AIM: PSUdaemon
IRC: irc.openprojects.net #psulug PSUdaemon
GnuPG: keyserver - pgp.mit.edu
#1 lore raw
Quoted 8 lines · Phil Sorber

hello,

i have an HP Procurve 4000M and a linux box with an Intel Pro/100 Dual Port Server Adapter (eepro.c). we have the switch set to do cicso etherchannel, which the procurve supports. but it seems not to work in this mode. we have to back down to trunking mode, giving us 200Mbit upstream, but only 100Mbit down stream.

Don't know what the problem can be, but as you seem interested in the code, apart from the bonding driver in official kernels, there an alternative (and more featureful) implementation here:
http://sf.net/projects/bonding/

It is a patch against recent 2.4.x kernels (lat 2.4.13). Apart from traditional bonding/trunking (two or more cards give you aggregated bandwith) it implements "link failover". Give it a try :)

Signature · 5 lines
José Luis Domingo López
Linux Registered User #189436     Debian Linux Woody (P166 64 MB RAM)
 
jdomingo EN internautas PUNTO org  => ¿ Spam ? Atente a las consecuencias
jdomingo AT internautas DOT   org  => Spam at your own risk
#2 lore raw
In reply to Phil Sorber
Quoted 13 lines · * Phil Sorber ([email protected]) wrote:

hello,

i have an HP Procurve 4000M and a linux box with an Intel Pro/100 Dual Port Server Adapter (eepro.c). we have the switch set to do cicso etherchannel, which the procurve supports. but it seems not to work in this mode. we have to back down to trunking mode, giving us 200Mbit upstream, but only 100Mbit down stream.

I was curious if it had been tested with any HP switches, or any non cisco switches for that matter that support cisco etherchannel. i was also wondering if this is not the case if anyone has written a patch, or is planning to write one to correct this.

Quoted 11 lines

if not, me and my colleague and i are willing to take a crack at it. however we have limited experience at something like this, but are eager to get into it.

any help or direction is apreciated. thanx.

Signature · 4 lines
Phil Sorber
AIM: PSUdaemon
IRC: irc.openprojects.net #psulug PSUdaemon
GnuPG: keyserver - pgp.mit.edu

I thought only the 8000M could do etherchannel.

Signature · 6 lines
Jason Cook                 |  GnuPG Fingerprint: D531 F4F4 BDBF 41D1 514D
GNU/Linux Technical Lead   |                     F930 FD03 262E 5120 BEDD
evolServ Technology        |  Home page: http://reinit.org

Um, it's like, uh ... did anyone see the movie ron'?
	-- Homer Simpson