bonding driver - linux kernel
hello,
i have an HP Procurve 4000M and a linux box with an Intel Pro/100 Dual Port Server Adapter (eepro.c). we have the switch set to do cicso etherchannel, which the procurve supports. but it seems not to work in this mode. we have to back down to trunking mode, giving us 200Mbit upstream, but only 100Mbit down stream.
I was curious if it had been tested with any HP switches, or any non cisco switches for that matter that support cisco etherchannel. i was also wondering if this is not the case if anyone has written a patch, or is planning to write one to correct this.
if not, me and my colleague and i are willing to take a crack at it. however we have limited experience at something like this, but are eager to get into it.
any help or direction is apreciated. thanx.
Signature · 4 lines
Phil Sorber AIM: PSUdaemon IRC: irc.openprojects.net #psulug PSUdaemon GnuPG: keyserver - pgp.mit.edu
Quoted 8 lines · Phil Sorber
hello,
i have an HP Procurve 4000M and a linux box with an Intel Pro/100 Dual Port Server Adapter (
eepro.c). we have the switch set to do cicso etherchannel, which the procurve supports. but it seems not to work in this mode. we have to back down to trunking mode, giving us 200Mbit upstream, but only 100Mbit down stream.
Don't know what the problem can be, but as you seem interested in the code, apart from the bonding driver in official kernels, there an alternative (and more featureful) implementation here:
http://sf.net/projects/bonding/
It is a patch against recent 2.4.x kernels (lat 2.4.13). Apart from traditional bonding/trunking (two or more cards give you aggregated bandwith) it implements "link failover". Give it a try :)
Signature · 5 lines
José Luis Domingo López Linux Registered User #189436 Debian Linux Woody (P166 64 MB RAM) jdomingo EN internautas PUNTO org => ¿ Spam ? Atente a las consecuencias jdomingo AT internautas DOT org => Spam at your own risk
Quoted 13 lines · * Phil Sorber ([email protected]) wrote:
hello,
i have an HP Procurve 4000M and a linux box with an Intel Pro/100 Dual Port Server Adapter (
eepro.c). we have the switch set to do cicso etherchannel, which the procurve supports. but it seems not to work in this mode. we have to back down to trunking mode, giving us 200Mbit upstream, but only 100Mbit down stream.I was curious if it had been tested with any HP switches, or any non cisco switches for that matter that support cisco etherchannel. i was also wondering if this is not the case if anyone has written a patch, or is planning to write one to correct this.
Quoted 11 lines
if not, me and my colleague and i are willing to take a crack at it. however we have limited experience at something like this, but are eager to get into it.
any help or direction is apreciated. thanx.
Signature · 4 lines
Phil Sorber AIM: PSUdaemon IRC: irc.openprojects.net #psulug PSUdaemon GnuPG: keyserver - pgp.mit.edu
I thought only the 8000M could do etherchannel.
Signature · 6 lines
Jason Cook | GnuPG Fingerprint: D531 F4F4 BDBF 41D1 514D GNU/Linux Technical Lead | F930 FD03 262E 5120 BEDD evolServ Technology | Home page: http://reinit.org Um, it's like, uh ... did anyone see the movie ron'? -- Homer Simpson