Atapi cdrom problem: wrong speed found by ide-cdrom
Hi. My cdrom is not working properly in linux (a plain 40x atapi-ide cdrom, unbranded as far as I can see from the outside :) ). The problem is that it is not working at full speed. Putting a data cd, here is the benchmark:
hdparm -tT /dev/hdc
/dev/hdc:
Timing buffer-cache reads: 128 MB in 2.80 seconds = 45.71 MB/sec
Timing buffered disk reads: 64 MB in 66.50 seconds =985.50 kB/sec
If I force speed 40 with hdparm -E 40, for about 20 secs, the benchmarks turns into:
/dev/hdc:
Timing buffer-cache reads: 128 MB in 2.43 seconds = 52.67 MB/sec
Timing buffered disk reads: 64 MB in 24.82 seconds = 2.58 MB/sec
After a time of inactivity or if I change media, the cdrom "slows down" to the original speed. I tried to play with hdparm, with no sucess. If I put an audio cd in the drive, I cannot change the read speed, nor with hdparm neither with cdparanoia (forcing speed with -S).
Is there any way to force a default speed for the drive?
Here goes some data:
___
dmesg | grep CDROM
hdc: ATAPI CDROM, ATAPI CD/DVD-ROM drive (no, its not dvd reader)
___
hdparm -i -v /dev/hdc
/dev/hdc:
HDIO_GET_MULTCOUNT failed: Invalid argument
I/O support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) HDIO_GET_NOWERR failed: Invalid argument readonly = 1 (on) readahead = 8 (on)
HDIO_GETGEO failed: Invalid argument
Model=ATAPI CDROM, FwRev=V130H, SerialNo=
Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=0kB, MaxMultSect=0 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 IORDY=yes, tPIO={min:227,w/IORDY:120}, tDMA={min:120,rec:150} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2
___
uname -a
Linux neraka 2.4.11 #1 Mon Nov 12 00:37:05 Local time zone must be set--see zic manuai686 i686 unknown
___
cat /proc/ide/hdc/driver
ide-cdrom version 4.59
___
cat /proc/ide/hdc/model
ATAPI CDROM (not very helpfull...)
___
sudo cat /proc/ide/hdc/settings
name value min max mode ---- ----- --- --- ----
breada_readahead 4 0 127 rwcurrent_speed 0 0 69 rwdsc_overlap 1 0 1 rwfile_readahead 0 0 2097151 rwide_scsi 0 0 1 rwinit_speed 0 0 69 rwio_32bit 0 0 3 rw
keepsettings 0 0 1 rw max_kb_per_request 127 1 127 rw nice1 1 0 1 rw number 2 0 3 rw pio_mode write-only 0 255 w slow 0 0 1 rw unmaskirq 0 0 1 rw using_dma 0 0 1 rw
Signature · 6 lines
Pedro Miguel G. Alves THINK - Tecnologias de Informa��o Av. Defensores de Chaves n� 15 4�D, 1000-109 Lisboa Portugal Tel: +351 21 3590285 Fax: +351 21 3582729 HomePage: www.think.co.pt