Skip to contentSkip to conversation

Atapi cdrom problem: wrong speed found by ide-cdrom

DISCUSSION Pedro Alves 1 participant 1 message Dec 3, 2001

lore
Share & tools
lore
#0 lore raw

Hi. My cdrom is not working properly in linux (a plain 40x atapi-ide cdrom, unbranded as far as I can see from the outside :) ). The problem is that it is not working at full speed. Putting a data cd, here is the benchmark:

hdparm -tT /dev/hdc

/dev/hdc:
Timing buffer-cache reads: 128 MB in 2.80 seconds = 45.71 MB/sec
Timing buffered disk reads: 64 MB in 66.50 seconds =985.50 kB/sec

If I force speed 40 with hdparm -E 40, for about 20 secs, the benchmarks turns into:

/dev/hdc:
Timing buffer-cache reads: 128 MB in 2.43 seconds = 52.67 MB/sec
Timing buffered disk reads: 64 MB in 24.82 seconds = 2.58 MB/sec

After a time of inactivity or if I change media, the cdrom "slows down" to the original speed. I tried to play with hdparm, with no sucess. If I put an audio cd in the drive, I cannot change the read speed, nor with hdparm neither with cdparanoia (forcing speed with -S).

Is there any way to force a default speed for the drive?

Here goes some data:

___
dmesg | grep CDROM
hdc: ATAPI CDROM, ATAPI CD/DVD-ROM drive (no, its not dvd reader)

___
hdparm -i -v /dev/hdc

/dev/hdc:
HDIO_GET_MULTCOUNT failed: Invalid argument

 I/O support  =  0 (default 16-bit)
 unmaskirq    =  0 (off)
 using_dma    =  0 (off)
 keepsettings =  0 (off)
 HDIO_GET_NOWERR failed: Invalid argument
 readonly     =  1 (on)
 readahead    =  8 (on)

HDIO_GETGEO failed: Invalid argument

Model=ATAPI CDROM, FwRev=V130H, SerialNo=
Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=0kB, MaxMultSect=0 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 IORDY=yes, tPIO={min:227,w/IORDY:120}, tDMA={min:120,rec:150} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2

___
uname -a
Linux neraka 2.4.11 #1 Mon Nov 12 00:37:05 Local time zone must be set--see zic manuai686 i686 unknown

___
cat /proc/ide/hdc/driver
ide-cdrom version 4.59

___
cat /proc/ide/hdc/model
ATAPI CDROM (not very helpfull...)

___
sudo cat /proc/ide/hdc/settings

name        value     min     max   mode
----        -----     ---     ---   ----

breada_readahead 4 0 127 rw
current_speed 0 0 69 rw
dsc_overlap 1 0 1 rw
file_readahead 0 0 2097151 rw
ide_scsi 0 0 1 rw
init_speed 0 0 69 rw
io_32bit 0 0 3 rw

keepsettings    0     0     1   rw
max_kb_per_request  127     1     127   rw
nice1       1     0     1   rw
number      2     0     3   rw
pio_mode      write-only  0     255   w
slow        0     0     1   rw
unmaskirq     0     0     1   rw
using_dma     0     0     1   rw
Signature · 6 lines
Pedro Miguel G. Alves

THINK - Tecnologias de Informa��o
Av. Defensores de Chaves n� 15 4�D, 1000-109 Lisboa Portugal
Tel: +351 21 3590285   Fax: +351 21 3582729
HomePage: www.think.co.pt